CE Smith Dolly for Personal Watercraft - 1,000 lbs

Video Transcript for Review of CE Smith Boat Accessories - Personal Watercraft Dolly - CE27575

Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at the CE Smith Personal Watercraft Dolly. This is a heavy duty wheel dolly that will support your personal watercraft like WaveRunners, jet skis, jon boats, or inflatable rafts. This will keep your watercraft off the ground while it's in storage or during cleaning or maintenance. It's also going to help brace your watercraft in or on your utility trailer so you can transport it safely. Tie downs for this are not included, so you can purchase those separately here at etrailer.com to make sure it's not gonna move around on you as you're transporting it.

This does have a one and a half inch square tubular frame that's made here in the USA of a galvanized steel construction, so it is going to be very sturdy. It's also gonna help resist corrosion. It's gonna give us a weight capacity of 1000 pounds. You can see we have two of these four inch bunk boards that will adjust to accommodate different watercraft sizes. So not only will they adjust to accommodate your different hole shapes and sizes, these can be tightened down once you have them set where you want them to be.

But then you can also see we've got these three holes here, so we can adjust how close or far out they are, from 12 inches to 16 inches to here in the center like we have it now, to 20 inches out wide. So lots of options there to make sure that you're getting a nice, tight fit for your watercraft. These do have a marine grade carpet on the bunk boards to help protect your craft's pink finish, so you don't have to worry about it getting scuffed up and that sort of thing. We do have these four inch diameter casters that will allow the dolly to be wheeled around very easily. So very easy to move your watercraft where you need it, whether you move it into your garage for storage in the off season or whatever the situation is.

It's gonna make it much easier for you. As far as our dimensions go, our overall length from one side of our bunk board to the other, we're right at 48 and a half inches long. Our width, we're gonna be going from one side here to the other. We're sitting about 34 and a half inches wide. And then our height, depending on where we have our bunk board set, our max height is gonna be about 20 inches tall.

It is gonna require a little bit of assembly. As you get this put all put together, like I said, I don't have these fully tightened down here, but once you have it set where you want it, you can tighten those down and so this will be steady for you. But all the hardware is included that you need to assemble this, as well as instructions that have pictures. So very, very simple to put everything together, to be able to move your watercraft where you need it. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.