Double row LED light bar with durable aluminum housing produces a bright white light. The combination spot beam and flood beam let you see at a distance, as well as off to both sides. Hardware, brackets, and wiring harness included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Blazer 38 3/16" long off-road mixed beam double row LED light bar. Now this LED light bar delivers a nice bright mixed beam of spot and flood lights, which is ideal for off-road driving. Did wanna zoom in and show you the differences. If you look, the flood beams, which are on each end, you'll see there's the lenses if you look are different, the top six LEDs, the bottom six, so a total of 12 flood beams on this end, and same 12 on the other end. The flood beam is great for seeing out in front of you and off to both sides.
The spot beams, which are in the middle, you can see their lenses are different. There's gonna be 30 on the top row, 30 on the bottom row in the middle, and the spot beam is great for seeing in a distance so you're gonna have a total of 60 of the spot beams on both rows. Now I do have this hooked up to some 12 volt power and I did wanna show you how bright the light is and the pattern of it. Basically you're gonna get a high quality light output from the two rows of each 36 3-watt LEDs. So I'm gonna go ahead and turn on the power.
Our light will come on. See how bright it is I'll go ahead and turn off the overhead light and you can see basically the light output on this. The raw lumen output is 14,000 lumens. The effective lumen output is 11,112 lumens. Wattage, 216 watts.
Power draw, 12.7 amps. And what I wanna do is I'm gonna move to the front and just flip it around so you'll be able to see the pattern on the back wall and it sort of gives you an idea, if you look at that pattern, how you can see in the middle, you can see the spot beams for the distance, and then on each end, the flood beams for in front and off to the sides. Go ahead and flip it back around. And then what I'm gonna go ahead and do is turn back on overhead lights. We'll go ahead and turn off our power.
Now the housing it's in, it is a nice rugged black powder coat aluminum housing. It's very lightweight and rustproof. Weight of this bar is only about 9.6 pounds. If you look at the fins on the back, it is channeled fins on the housing and that'll let the heat quickly dissipate to optimize LED performance. The lens on this, it is a tough polycarbonate lens. It is impact resistant. Has an IP67 rating for protection against dust and moisture. This is compatible with 12 volt DC and 24 volt DC system. It is a very easy installation. If I zoom in on the end, you'll see on this end here the mounting brackets, there's one on each end. I've installed 'em just to give you an idea what they look like, but basically those mounting brackets and the hardware on the table right here, you'll be able to see the hardware for mounting the brackets and the wrench for tightening the brackets. That's all included. The feet are the mounting brackets. Here you can see they are universal mounting feet. They provide a nice sturdy base. And what's nice about it, has a bolt right here and that wrench that's included, you can tighten that down or you can loosen it. If you loosen, you can see it'll allow you to angle that wherever you need the light going. Once you get it in the spot, then just tighten it down with the wrench that's included. Now, this does also include this quick connect connector right here. You can see that you hook into your wiring. I am gonna disconnect it from our wiring. And what's nice about it, it is sealed there so it keeps moisture out so you just have to push in on this and it slides right out, simple as that. Has the nice seals around it, and when you go to connect it, you just push it in and it gives you a nice seal. That is included. Last thing I'm gonna do is give you some specs on this. We're gonna do the overall dimension and that's gonna include the mounting brackets. It's 40 3/4" long. The height with the brackets installed from the bottom to the top is 4 3/8" tall, and the total depth is 3 7/16" deep. Now just the light bar itself without the mounting brackets is the 38 3/16" long, 3" tall and the same 3 7/16" deep. But that should do it for the review on this Blazer 38 3/16" long off-road mixed beam double row LED light bar.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.