Why are there Different Amp Connections On The Blazer LED Cube Light Kit # BL28VR?

Question

Question:

On the control box why are there 18 amp hook ups and 5 amp hook ups. I assume this is where you plug in each individual light. Thank you.

asked by: Albert V

0

Expert Reply:

You are correct the hook ups are for the lights on the Blazer LED Cube Light Kit # BL28VR. The different ratings are for each of the circuits. The lights that come with the kit will fit onto the smaller connections allowing you to connect more powerful Light Bar # BL86VR that can be controlled with the remote.

expert reply by: Bud M

0

Al V.

3/14/2024

Thank for your response. I was hoping to use 4 of the same cube lights that come with the kit. Is this possible?

Reply

Bud M.

3/15/2024

@AlV Absolutely you can. We have additional Flood Lights # BL48VR like those that come in the kit or Spot Lights # BL68VR if you want a different beam style to shoot further. These lights are sold individually so you will need to order 2 of whichever light you choose.

Reply

Answer 1

Yes, the Blazer LED Cube Light Kit #BL28VR can be used on your 30 amp RV as long as you have a 12 volt wiring system which this light uses. As far as how many of these lights you can hook up each remote is capable of controlling up to 4 of these…

view full answer...

Answer 2

Most of the time people want the pivot to swing out to the passenger side of the vehicle like what the part #PVP20B offers. This is because if you were for some reason on the side of the road and needed to get into the back of the vehicle you could…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

I am sure your wheels are rated for the 110 psi that your tire requires but your valve stems may not be rated for the pressure rating as that is typically the weak point so you could use the part #AM20906.

view full answer...

Answer 5

I went and pulled the Curt Hook with Spring Loaded Safety Latch #C81288 from our warehouse to measure it for you. Check out the picture I attached to see all of the dimensions.

view full answer...

Answer 6

Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…

view full answer...

Answer 7

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend the #e98905 because the matte…

view full answer...

Answer 8

I went ahead and spoke with Hopkins about the Blazer Off-Road Lighting Remote Control Kit #BL43VR and they informed me that the wire leads are 24" long and they do have ring terminals at the ends.

view full answer...

Why are there Different Amp Connections On The Blazer LED Cube Light Kit # BL28VR?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching