Roof Rack Includes:
Part Numbers: INB137,INSUT,INK676
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation.
Features:
Specs:
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2016 Ford Edge we'll be taking a look at Eno Arrow crossbars. The part number for our crossbars today are INXB115-2, for our flush feet we're using INSS200, and for our custom fit kit for the Ford Edge we're using INK676. These crossbars are a low profile aerodynamic design which will help to reduce wind noise and drag and will allow you to carry any roof-mounted accessories on top of your vehicle. This works with either channel-mounted or clamp-on accessories. The weatherstripping on the inside easily pushes down to adapt for those channel-mounted accessories as well as to help keep dirt, debris and liquid out of your crossbars when you don't have any channel-mounted accessories loaded up. All pieces of the roof rack kit come with a limited lifetime warranty and the crossbars have a 165 pound weight capacity. Here, everything we have on our table is what is included in our kit. We've got our foot pack with our locking cover.
The hardware that the tools that we'll need to secure this to our bar. Our crossbars here. Our fit kit that will be custom for our Ford Edge. The only thing we needed to provide was a flat tape measure. To start our install, we're going to slide this portion here out until it comes all the way out on the end. Then we'll take our metal bracket and we're just going to stick it up underneath and then sliding that piece back in so that it is all in the way in this section here.
That will help us to connect our foot pack to our crossbar. To get our foot pack ready we're going to start by removing our bolt here. We're going to remove the washer with that. We'll take our metal clamp and loosely set that on top and start to tighten down our bolt once again. We don't want to tighten it too much. We still want it to be loose so that we can fit this onto our roof. We'll flip our foot pack over, take our rubber bottom and this is going to secure to the bottom of our foot pack.
Next, we'll take our foot pack and we're going to secure it to the bracket here. Our foot pack is going to slide on top and then slide all the way down to the end of our crossbar. Our measurement for the distance between our two foot packs is going to be 111.5mm. That's going to be from the center of our foot pack to the center of our foot pack. Now we'll take the larger Allen key and we're just going to tighten down the bolt on the inside. This is going to insure that our foot pack stays in this position.
We'll do the same thing to the other side. Now I'm ready to open up our vehicle doors and load this up. I'm going to take our crossbar and make sure that the fatter side is facing towards the front so you get that nice aero shape. We're just going to place this around our vehicle. Now we'll measure our crossbar spread. This is going to give us the correct placement for our rear crossbar. We're actually going to measure from the center of our weatherstrip here between our two doors. Our measurement should be 48mm. We'll measure the other side. With those in place we'll take our included torque tool and we're just going to tighten down this bolt here. We're going to start by tightening it down so that the clamp fits just up against our door jamb here. We'll do the same thing to the other side. Now we'll go back and forth doing about 5-10 turns on each side until it's completely tightened down. When you hear that clicking noise that's when you know you have enough torque behind the bolt and it's completely secured down. We'll do the same thing to the other side. We've got both sides completely tightened down and our door is closed. We're going to take our locking end cover and lock that into place. That's going to help prevent theft and tampering of your crossbars and any channel-mounted accessories that you may have. Now we're ready to load up our gear and hit the road. That's going to be our completed look at the Eno Arrow crossbars for our 2016 Ford Edge.
Average Customer Rating: 4.7 out of 5 stars (1311 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation. These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
This product exceeded my expectations!! Fit my 2014 Explorer with no issues. Extremely easy to install- took about 15 minutes, these crossbars are sturdy and fit perfectly in the INNO feet that secure to the roof rails- I will be hauling 2 paddle boards and have no doubts that they will travel well. I recommend this product !!
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
Worked great! Held up a roof top tent all summer. No bending or damage from use.
They look good the only problem is that the brackets that grip the rail are too straight so that the pads do not meet the roof and they bend the crossbar
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
Work exactly as described and after a year, still in great condition.
I did the research for a while looking at many different brands for a good quality crossbar at the right price. I came across this one a Japanese brand. As I read more about the brand it has been popular in Japan. I know Japanese product are top quality.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
Rack works great with my 2014 escape carrying a heavy 14 ft old Town and a 10ft kayak. Service is great, was missing 2 endcaps called them up and they sent them out next day.
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
Fantastic customer service.
Andrea is great.
Thanks for your help!
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
My order just arrived this afternoon and I have not yet looked at everything by I am upset over the rails falling out of the box as it is damaged. I will be looking to make sure all parts are contained but so far not thrilled with the condition of the materials as delivered.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Great product so far! Just installed the roof rack on my 2015 Ford Fusion and everything was straight forward. I’m excited to use it while kayaking and traveling!
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Inno Accessories
Fit to this rack on your 2016 Ford Edge
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.