Part Numbers: DM8550040,DM8552020-71
Hitch slides automatically as you drive to give you 22-1/2" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking.
Features:
Specs:
Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Automatic Slider Makes Cornering Easy
A slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
Normally, you'd have to get out of your truck and pull a lever to release the slider before every turn, but what if there was an automatic system? Imagine having 22-1/2" of extra clearance while towing your fifth-wheel trailer. Now imagine having this without needing get out of the truck to move your slider. The Demco Autoslide makes this fantasy a reality. The Autoslide automatically glides back smoothly when you make a sharp turn so you can maneuver effortlessly around tight corners within campsites and parking lots.
The Autoslide has a built-in roller-and-guide assembly that allows for smooth, controlled, and automatic movement. As your truck turns, this assembly also turns. When the assembly turns, an arm in the base of the hitch moves down 1 of 2 tracks in the interior of the base. This action causes the head to be pushed down one of the exterior tracks in the base. So, when your truck makes a sharp, slow-speed turn, the roller-and guide assembly inside the Autoslide forces the hitch head to slide down toward your truck's tailgate in a smooth, controlled motion. This way, any time that your truck turns more than 10 to 15 degrees, the Autoslide will ensure that there is enough clearance for your trailer to complete the turn as well, and it will do so without any jerking or binding.
In order for the roller-and-guide assembly to function as designed, the pin box must be stabilized on the hitch head. Normally in a 5th-wheel hitch, the king pin moves inside of the hitch head so that the trailer can turn. With the Autoslide, the king pin remains fixed inside of the jaws of the hitch and it is the hitch head itself that turns. This is thanks to the capture brackets on the sides of the head that brace the pin box from both sides to hold it in place on top of the hitch head.
To stabilize your pin box on the hitch head, simply push the capture brackets up against your pin box once the trailer is coupled and tighten the outer bolts and the inner jam nuts. The Autoslide head and brackets will fit standard pin boxes that are between 12" and 14" wide. If you have a Glide Ride, Mor Ryde, Trailair Tri Glide, or 5th Airborne pin box, you must install a special locking plate (sold separately) as well.
When you straighten your rig out again and your trailer moves back in line, the hitch head will rotate back to center and slide back toward the cab into the straight towing position.
Secure Wraparound Jaw with Locking Bar
The single-piece, strong wraparound jaw completely surrounds your trailer's king pin for 360 degrees of contact. This wraparound jaw provides a more secure connection than standard 2-piece jaws that close in on the king pin from the sides. The increased jaw-to-king-pin contact on the Autoslide offers tighter tolerances around the king pin, which minimizes both rattle and chucking, for a smooth, quiet ride.
A 3/4" solid steel locking bar spans the area in front of the jaw. This bar provides an added barrier of protection against accidental disconnection so you can have peace of mind that your trailer is secure. The locking bar is attached to the jaw and to the spring-loaded handle. The bar automatically locks when the jaw closes around your king pin.
Double-Pivot, Cushioned Hitch Head
The double pivoting, cushioned head improves your towing experience dramatically by helping to reduce jarring and unwanted noise. Built-in pins allow the hitch head to pivot back and forth and side to side. And hooking up is easy because the hitch head will automatically pivot to the proper angle when it comes into contact with your pin box.
Three polyurethane dampeners help to cushion the movement from the pivoting head and to reduce towing noise. Two of these dampeners are built into the head assembly to cushion the head's side-to-side pivoting. The third dampener cushions the back-and-forth motion and must be installed in the hitch prior to use. Installation of this third dampener is easy - simply press the dampener up into the pre-drilled hole underneath the hitch head.
Easy Installation
The Autoslide hitch is designed to attach to universal above-bed base rails . The hitch will fit most industry-standard rails, including those from B&W, Curt, Demco, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley. The hitch comes pre-assembled for an easy installation. All you have to do is bolt on the side plates and attach the head to the hitch base.
The side plates have 2 functions. They contain the feet that fit into your above-bed rails, and they allow you to raise or lower the hitch head to better match your pin box height. After you choose your desired height setting, simply bolt the side plates to the hitch base with the included hardware. Then attach the base to the rails with the included safety pins.
Clearance Formula for Short Bed Trucks
Use the formula below to ensure there will be enough space between your truck cab and trailer when executing a 90-degree turn.
(A+B) - C = Clearance
A = Distance from the center of fifth-wheel hitch jaw to truck cab
B = Length of Travel (22-1/2")
C = Width of trailer divided by 2 (to get half)
For example: If the distance from the center of the hitch to the cab is 36", 36" + 22" = 58". If your fifth-wheel trailer is 102" wide, take half (51"), then plug in: 58" - 51" = 7" of clearance.
Note: At least 4 inches of clearance is recommended to safely execute a 90-degree turn.
Install your fifth-wheel trailer hitch in your truck bed with this kit. Semi-custom brackets reduce the amount of time required to install the hitch. Brackets, base rails, and hardware included.
Features:
Average Customer Rating: 4.7 out of 5 stars (598 Customer Reviews)
Hitch slides automatically as you drive to give you 22-1/2" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking. Install your fifth-wheel trailer hitch in your truck bed with this kit. Semi-custom brackets reduce the amount of time required to install the hitch. Brackets, base rails, and hardware included.Trailer rep,Alex, was very knowledgeable about the products and was a great help with helping me select the correct trailer kit for my truck.
Wow, where to begin. I can't imagine towing a 5th wheel trailer in a shorter bed truck without an autoslide setup. After the initial install I noted on the 2nd(?) trip a clunking noise during acceleration after a stop - a couple emails back and forth with Demco support, as well as a quick phone call, and it was all sorted out (user error) with no further issues - Thank you Demco!
I tow a short & light Jayco 5th wheel with a 1/2 ton shortbed and having the ability to drive, turn, and park the camper without having to get out of the truck to manually engage or disengage a slide on the hitch has made for much more relaxing weekends away. The Hijacker autoslide gives PLENTY of space between the camper and cab and I've never had to worry, but I did my homework and ran the numbers well before I purchased my hitch so I wasn't surprised.
I would say the only downside for me would be the weight and bulkiness of the hitch. Not having the means to easily remove and store it between trips, the hitch is forced to live in the bed of the truck right now, but I did know about the weight going into the purchase.
All in all, for the peace of mind the Demco autoslide gives me, I'd spend the money all over again.
Hitch works great, my truck has a 5’7” box, I can back up turning 90 degrees if I need to. It’s very important that your pretty straight when you unhook or you can’t hookup. You have to be more accurate when hookup. The first few times it seemed like it was going to be a hassle, you just have to pay a little more attention. Hitch is worth it
Your team was very helpful getting me the hitch that I needed, and it arrived a little sooner than expected. In fact my truck is still in the repair shop for the damage caused by the other hitch, so I have not installed the new one as of yet.
Thanks for all your help.
Everyone that I spoke to on the phone were very helpful. I haven't hooked up my hitch yet but I like what I see so far.
everything i have bought i am very happy with and will buy again.
Heavy duty
Well built fifth wheel hitch. Haven't got a chance to tow our new Montana High Country 295RL. But I know a guy that has towed his fifth wheel with this same hitch. I'm sure this 18K hitch will be excellent! Or I wouldn't have bought it. I recommend e trailer for everything.
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
A very nice hitch. If you have a bed carpet or a bed liner it may require Un shimming the locking pins. I have a bed carpet and I had to stand on the back corners to get the pins to engage the bed pucks. Not really a big deal. It is very heavy so I assembled it in the bed of the truck. I would highly NOT recommend doing it this way except if you are by yourself. Get a chain hoist or maybe an engine hoist because it is very heavy as an assembled unit. It is flawless in its operation. Very well made. I am very happy with it.
After a year, I still like my Demco autoslide. It works great. I have pulled my trailer quite a few times and have had no issues at all. I know quite a few people that pull 5th wheels and one actually went out and purchased a autoslide after watching mine work.
LOVE, LOVE, LOVE IT. I purchased 2 different 5th Wheel Hitches before I purchased this one. After hitting the cab of the truck, I wanted to get a slider. I did my research for several months and just kept coming back to the Demco. This hitch automatically makes the adjustment when I need it, even when I don't realize I need the extra room. I never have to get out of the truck to release the hitch to slide back. I put the hitch together with no problems, of course it came about put together anyway, and the Instructions were good. the locking down ont he truck seems to be easier than other I had. The only regret I have is that I didn't buy this one sooner.
Item works exactly as described. I have a shortbed (6.5') Ford F350. Probably towed our 5th wheeler 5000+ miles with no problem. Then last year it happened! We were making a sharp turn in an uneven lot and POW, the 5vr hit the rear window and it exploded. After that I became gun shy about turning with the 5vr attached so I started looking at sliding hitches. A slider that you had to get out and unlatch to make work, didn't make sense to me. At what point do you get out? So, an auto slider hitch was purchased. Now when I get to a certain degree turn the auto-slide hitch moves back in its carriage and then auto-slides to the normal location once straightened out. Not gun shy anymore.
Pro:
Well packaged
Well made
Easy install
It WORKS.
Cons:
Price
Very heavy
Some clunking after it straightens out from a turn
Very happy with my Demco Autoslide hitch after one year. We pull a Montana 3120 35 ft 5th wheel with a 2019 Ford F-350 short bed. Took a month long 6,000 mile trip from Colorado to New England/Canada this Summer. Lots of hilly/curvy roads and some remote campgrounds with tight corners and some near 80 degree back ins. Never came close to trailer contacting the truck. I’ve had no jerking or other issues when turning or stoping/starting. Works great. The only drawback is there isn’t much room for error when you back up to hook up the trailer, so it takes a little practice to get used to correctly lining up your Demco Hitch to the trailer. The first couple of trips, it took me 3 or 4 attempts to properly line it up. No longer an issue for me after a few trips and you get used to the angles. It weighs about 300 pounds. I got a small chain hoist which I installed in my garage rafters and easily lift the hitch in and out of my truck and just let it hang front he rafters until I need to use it.
This 21K unit is very well built. It does have some weight to it so some help installing would be much easier.my installation was completed solo and took approx 1 hour in a GMC 3500 Denali.
The Demco Auto slide takes the worry out of towing my fifth wheel trailer with a short bed F-350. I have had no problems with backing into tight camping spots. And since everything is automatic I have one less thing to worry about while traveling with a fifth wheel.
The only problem is that it is a little on the heavy side, so I just leave it in the truck when not towing. Problem solved.
I am extremely happy with the product.
Solid hitch and fits as expected. Only 4 stars due to the limited hitch up angles. You really have to be within about 5 degrees of straight with the hitch in order for the system to function. Did not have this much of a problem with my other auto slide hitches, but this is the only one I could find with the weight rating I needed for my combo.
This review is for the Demco Autoslide 21k and accompanying OEM rail adaptor I purchased for a 2020 Ram 3500 Megacab DRW. I've owned it one year. Overall, the hitch performs as I expected. It is high quality, very sturdy and seems like it will last for a long time. I had it installed at the dealer when I purchased the truck. It automatically slides to protect the cab in my 6'4" bed without any incidents. I tow a standard fifth wheel RV. There are a few negatives, which are not necessarily shortcoming of the product but, instead, necessary evils to allow me to have a short bed. First, it is BIG and BULKY. I believe this is just a function of the mechanism required to allow the autosliding feature and I am not really sure there are any other lighter alternatives with this feature. The fact it requires two parts (OEM Puck Rail and hitch), make it even more bulky. It takes up almost the entire bed and prevents most auxillary tank / tool box combos from fitting. Even standard size storage bins will not fit in my bed. I would prefer if they had a custom OEM all-in-one hitch for my truck like they do for the Ford. It adds significant weight, which decreases carrying capacity, which can be at a premium in hauling a heavy fifth wheel. I've never even tried to take it out of the bed due to the weight and difficulty. I also am not very happy with the adjustable catch plate design. It requires significant manipulation loosening and tightening 8 nuts when hitching and unhitching. This requires a step ladder to reach the nuts. I also found out after the fact that it does not come with the right size catch plate attachments for my hitch and I had to purchase a separate part, which added unexpected expense and delayed my taking the RV on its first trip. Overall, I am satisfied with the hitch.
I INSTALLED THE DEMCO HIJACKER AUTOSLIDE FITH WHEEL HITCH IN MY 17 F250 WITH THE FACTORY PREP PACKAGE. THE HITCH FIT PERFECTLY INTO THE FACTORY PUCK SYSTEM. DID NEED A FRIENDS HELP DO TO THE WEIGHT OF THE UNIT. I AM VERY PLEASED WITH THE OPERTION OF THE AUTOSLIDE AND THE FACT THAT I DON'T REALLY HAVE TO WORRY TO MUCH ABOUT THE TRAILER CONTACTING THE CAB OF TRUCK SINCE I HAVE A 6 FOOT BED. THIS IS THE FIRST FIFTH WHEEL HITCH I HAVE EVER USED BUT WOULD RECOMMEND IT TO ANYONE THAT HAS A TRUCK WITH A SHORT BED. ONLY 4 STARS BECAUSE OF THE LEARNING CURVE OF HITCHING UP AND THE THING IS PRETTY HEAVY. ONCE I LEARNED THAT THE HITCH AND THE TRUCK HAVE TO BE PRETTY STRAIGHT IN LINE DUE TO THE CAPTURE PLATES HITCHING UP HAS BECOME A NONE ISSUE. I DID PURCHASE AN ENGINE HOIST SO THAT I CAN REMOVE THE HITCH FROM THE BED OF MY TRUCK BY MYSELF IF I NEED TO, BUT FOR THE MOST PART IT JUST STAYS MOUNTED. I ALSO LOVE THE FACT THAT IT HAS A HIGHT ADJUSTMENT WHICH ALLOWED IT TO STILL FIT UNDER MY BEDS TONNEAU. OVERALL VERY SATISFIELD WITH PURCHASE
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised.
The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution.
We are very happy overall with this hitch, and plan to keep it . Thank you.
Ask the Experts about this Fifth Wheel Hitch
Do you have a question about this Fifth Wheel Hitch?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.