Part Numbers: HA81725,HA81794-HBC
This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity.
Features:
Specs:
Braking output is the maximum amount of power that will be applied to your trailer's brakes. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to set the braking output as high as you can without locking up the brakes. Once you've set up the brake controller the first time, you shouldn't need to adjust the settings until the trailer load changes, you switch trailers, or road conditions change. Use the thumbwheel on the left of the module to change your settings.
The red LED indicator light illuminates when the trailer brakes are applied. This light glows brighter as the power output to the trailer brakes increases.
The Hayes Syncronizer keeps the manual override within easy reach on the front of the module, great for stopping sway or controlling your trailer's momentum in emergencies. Push the slide-bar lever to activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Quick, Simple Installation
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and manual override.
If your vehicle already has a plug-in brake controller wiring harness, just connect the unit to it. Otherwise, you will need to purchase a vehicle-specific wiring harness (sold separately) to plug into. If a harness is unavailable for your vehicle, hardwiring will be necessary.
Installation Accessories
See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Note: If a custom brake control wiring adapter is not available for your vehicle, a 20-amp circuit breaker (sold separately) may be required for installation.
The Hayes Syncronizer comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Syncronizer. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. The amount of braking power (output) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port behind your vehicle's dash.
Features:
To install your Hayes electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, in which the wiring is run for you from the dash to the trailer connector on the back of your vehicle. Usually when this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the built-in connector behind your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of the dash, near the driver's side. Carefully pry the panel out and undo the locking tabs to remove the panel. Plug the adapter into the mating connector in the large gray housing behind the panel.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
Average Customer Rating: 4.7 out of 5 stars (88 Customer Reviews)
This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity. Install your Hayes electric trailer brake controller quickly and easily with this custom wiring adapter. One end plugs into the controller, and the other plugs into the built-in port behind your vehicle's dash.No threaded inserts in unit and screws for attachmen, guess you get what you pay for
Super fast delivery and easy plug and play installation. Would highly recommend
Nice product and very easily installati on.
Great price, no delay as it came the same day as promised. Feel very comfortable dealing with etrailer !
Super easy to install and the additional information they provided for my specific vehicle made it possible for me to have every piece necessary for a seamless installation.
Splicing the wires was no problem. Instructions were good. The only recommendation that I will give is that you trash all screws with flat screw driver heads. I also opted for bolts, nuts & washers for attaching the bracket.
Easy to install. Clear instructions.,Works great.
I think it will be a good brake controller, I have not had a time delayed on before.
works great
Original supplied item was defective, however Hayes customer service immediately sent another unit and it works great. With the addition of a small removable slip in bracket for the console of my 2012 GMC 1500 Crew Cab and the wiring adapter, I can simply plug and play when I need the controller as opposed to a permanent installation that I have in my other pickup.
I, order wrong wire adapter by mistake, I called etrailer, and spoke to nice lady there and gave the number of the one I had ordered, she looked up what I needed and placed order while I was on the phone with her. Got the adapter and it was the correct one and works perfect. To help others Ford puts a hard shell in there wire to protect against short circuit, it has to be removed before you can plug any adapters into it.
This harnress was exactly what I ordered. Very pleased as usual.
I have to add that for a while I was sure that I had received the wrong product. Then I watched an Etrailer install video and realized that the plug in my truck had an adapter attached that had to be removed before the harness could be plugged in. 5 minutes later I was done and ready to tow.
Installation was simple and straightforward. Took less than 30 minutes from start to finish.
Looks good!
Works well. I like the delayed brake activation, it seems to be a smoother transition. The custom harness makes installing this controller easy and FAST. Love buying Made in the USA products and etrailer.com has a lot of them.
easy to install. Brakes tested good to trailer. I used self taping screws to mount brackets, rather than the bolts and nuts that it came with.It was to difficult to get my hands in position to use bolts and nuts (no big deal).
This is the 2nd one of these I’ve bought. I like the time delay application to the brakes. Always will try to buy products made in the USA. The price went up since I bought this same controller 1 1/2 years ago.
Installed in 10mins in 2018 ram 1500 ecodiesel, have not used with trailer yet. Seems good for price, mounting bracket could be made a little better. Good service from e trailer
Good controller at a good price. Works as expected. Fast shipping at standard rate. This controller was installed in an 08
Sprinter camper with the help of the on line video from etrailer.
Thanks,
Gary
Etrailer was very helpful with all the info needed to buy the correct connecting cable for my Hayes brake control. Delivery was quicker than expected & of course the cable works as stated.
Great job again!
Thanks Etrailer!
Fit perfectly. Followed instructions and it works as it should. Great product at a great price.
Was easy to install and adjust. Works great applying breaks to my single axle dump trailer.
Installed in 10 minutes. Works excellent and combined with the wiring adapter was a simple plug and play.
Perfect adaptor for my brake controller to my truck.
The trailer seems to be holding up just fine. It was a good investment for my small business and I'm thinking about buying another from you.
Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.