SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-080,31080
Retail:$2,676.53
Our Price: $2,570.99
You Save: $105.54
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meSnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31080
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 350 lbs
- Gross trailer weight: 3,500 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31080 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31080
Average Customer Rating: 4.5 out of 5 stars (17 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: Carl05/08/2020
Very pleased with front mount trailer hitch from etrailer. I installed it on a 2002 dodge Dakota 4x4 to move my camping trailer around. I removed my front bumper (4 bolts and 2 wire from fog lights) very easy. I hit a deer years back and my front end was damaged,it was fixed, but when I went Hook up front hitch ,the bolts holes were off about by 1/4“. I solved the problem with Aluminum racing jack and 4 ton porta power to align holes in frame and hitch. The whole process took about a hour. I would suggest to hook front bolts over front axel plate first.The hitch is now the strongest part on my truck. Like I said my mounting holes were off due to hitting deer. Moving my trailer from the front is so much easier,I can hook it myself and I,m mid 70,s.etrailer is great, always a good experience with great customer service
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: John01/17/2023
The receiver works well. It was very difficult to install. The two middle bolt holes (where a skid plate may go) didn’t line up correctly l. It was the correct year, make, and model for the hitch and my truck. I just couldn’t get them to bolt up correctly. The hitch is just mounted to the frame rails.
by: Chenoa08/18/2023
Was very pleased with the customer service the going above and beyond the helping me with my concerns the answering the phone right away and even following up with me after the package got delivered to make sure I received the package
by: Michael 12/30/2023
Works well for the price.
by: Al09/14/2015
2001 DodgeDakota
Not on yet but looks rugged and I have a pintle adapter to bolt on and am going to make a plow for the front of my Dakota for snow. al ps , just for the shipping dept. ,the box was destroyed with the rear of hitch hanging out of box. I could have packaged it better. Please educate your people about pressure points . It should not have busted out in 4 or 5 places.
by: Jennifer 01/20/2021
Honda Ridgeline
I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.
by: Phil 10/18/2020
2000 Dodge Durango
All the parts were delivered and are installed. The instructions are good and the receiver is solid. Thanks
by: Rick S09/19/2017
Dodge Durango
Seamless experience from purchase to delivery. My hitch arrived on time as promised, well wrapped and now all I have to do is get it attached to my Durango. I hope that goes as smoothly.
Rick S.
9/19/2018
I had the hitch professionally installed. It was relatively inexpensive to have that done and I know what my area of expertise is and attaching trailer hitches is not that area. The hitch is working wonderfully well. I had it attached to my dodge Durango and used it to launch and recover my boat this summer. It made launching and recovering the boat so easy. If I had known how much easier it was pushing a trailer with the front of the vehicle versus backing a trailer down a little tramp I would have done this year’s ago. The trailer hitch worked perfectly.
by: Woody F09/19/2018
This was and still is a great hitch , use it more in the winter than summer , I would use these people over and over again GREAT people to work with .
Woody F.
9/19/2019
Some of the best money spent on my truck have used this item over and over many times . Great item and very professional people to buy from will use e-trailer anytime I need this type of items for my trucks . Thanks again,
by: Ken N.04/25/2015
2003 DodgeDakota
The hitch was easy to install with no assistance other than my 5 year old granddaughter.. It works great.
by: Timothy02/27/2020
etrailer has been a great!!! They have been updating me on all the shipments.
by: Bill P.03/15/2015
2000 DodgeDakota
Fit like a glove but a slight pain to install by myself. A floor Jack helped a lot. For my 2000 dodge Dakota SLT 4x4 quad cab the only thing I would change would be longer bolts for the center mount to allow reattachment of the skid plate.
by: George B 11/09/2016
2000 DodgeDakota
We got the hitch well packaged fit perfect use it every snow storm to attach my plow worked GREAT!!
by: Antonio02/22/2023
17
17
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge Durango
- We have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models.
If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
- Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When Installed
- I was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
view full answer... - Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
- The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
view full answer... - Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch Hitch
- For your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
view full answer... - Snow Bear Plow Recommendation for 2008 Honda Ridgeline
- You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement.
You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
view full answer... - How to Determine if the SnowBear Plow # SB324-080 Would Block Headlights
- The blade height of the SnowBear Plow # SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and whether or not the headlights would be blocked.
view full answer... - Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
- The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
view full answer... - Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
- The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121.
You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
view full answer... - Recommended Snow Plow For A 1994 Jeep Wrangler
- I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow.
We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
view full answer... - Snow Plow for a 2005 Honda Pilot
- We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall.
view full answer... - Snow Plow For 2003 Ford Ranger
- We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
view full answer... - Front Hitch and Snow Plow Recommendation for a 2003 GMC Envoy
- As long as you have a front hitch on your 2003 GMC Envoy like the # 31055 the snow plow part # SB324-080 will fit. It's a bit wider than most plows that would get used on a smaller SUV like the Envoy, but if you plan to upgrade to a full size truck eventually this would be a good plow to use.
You would be able to easily transfer it over to the Sierra when you needed too.
view full answer... - Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado
- Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver.
The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500
- The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065.
If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup.
For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
view full answer... - Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
- Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
view full answer... - Recommended Front Mount Hitch for Attaching Snow Plow to 2004 Jeep Grand Cherokee
- We do indeed offer a front mounted hitch for your 2004 Jeep Grand Cherokee. You'll need the Curt # C31048. Once the front mount receiver is in place, you'll have the mounting point for a snow plow like the SnowBear # SB324-080. If you click the provided link, you can see the installation instructions for the hitch and the plow.
view full answer... - What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
- I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is
view full answer... - Replacement Spring for SnowBear 324-080 Snow Plot
- I have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break.
We do also have some other parts available for
view full answer... - Are Photos Available of the Front Mounted Trailer Hitch Installed on a 2001 Dodge Durango
- At this time we have not had the opportunity to install a front mount hitch on a Dodge Durango, so I do not have a vidoe to show what the CurteFront Mount Trailer Hitch, # 31080, looks like when installed. I was able to speak with my contact at Curt Mfg. and he sent me a photo of the Curt Front Mount Trailer Hitch, # 31080, on a Durango, see attached photo.
I also linked installation instructions for each of these hitches for you to review.
view full answer... - Recommendation for a Front Mounted Hitch on a 2004 Dodge Dakota Quad Cab
- I checked the directions for the Curt Front Mounted Hitch # 31080 and it states that there will be no drilling or cutting required to install this hitch on your 2004 Dodge Dakota, so that will make the install much simpler to mount.
Running the hardware thru the frame could be slightly problematic for a novice using the fishwire technique. I've linked our Help article on hitch installation tips and a video on how use the fishwire (also known as a bolt leaders) to install the mounting
view full answer... - Front Hitch Recommendation for a 2002 Dodge Dakota 4x4
- For your 2002 Dodge Dakota 4x4 I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions for you to check out.
Once you have the front hitch installed, a plow like the SnowBear # SB324-080, will fit in the 2 inch receiver.
view full answer... - What is Towing Capacity for Curt Front Hitch that Fits 2003 Dodge Durango
- The Curt hitch # 31080 that you referenced that fits your 2003 Dodge Durango has a 3,500 lb trailer weight rating and a 350 lb tongue weight capacity.
view full answer... - Front Hitch Recommendation for a 2003 Dodge Dakota
- Basically you are going to have to pick which you would rather have installed on your 2003 Dodge Dakota. You can either have front hitch part # 31080 installed or the base plate kit that you currently have installed since they are going to both occupy the same place.
I spoke with my contacts at Roadmaster and they compared the install locations on both products and said that since they will occupy the same install brackets and area they wouldn't play well together.
view full answer... - Does Curt Hitch # 31080 Fit 2003 Dodge Dakota SXT 4x4
- Yes, the Curt front hitch part # 31080 does fit your 2003 Dodge Dakota SXT 4x4 as we have confirmed this with Curt. I attached the installation instructions for you to check out.
view full answer... - Front Hitch Recommendation for 2001 Dodge Dakota for SnowBear Plow
- Yes, for mounting a SnowBear Plow like the part # SB324-081 on your 2001 Dodge Dakota Sport the Curt front hitch part # 31080 that you mentioned is a confirmed fit and would work well.
view full answer... - Will the Curt Front Hitch Part # 31080 Fit a 2000 Dodge Dakota Sport
- Yes, the Curt Front Mount Trailer Hitch Receiver part # 31080 will fit your 2000 Dodge Dakota Sport 4x4. There is little to no aesthetic changes on the Sport models so there will be no problems with installation on your truck. This is a no-drill option that installs using pre drilled holes in the frame rail
view full answer... - Front-Mounted Trailer Hitch & Cargo Carrier for 2001 Dodge Durango 2WD
- I double-checked with Curt, Draw-Tite and Hidden Hitch for a front-mount hitch receiver for your 2001 Dodge Durango with 2WD. Neither Draw-Tite nor Hidden Hitch have a front-mount for your 2WD Durango but my contact at Curt confirmed that their 2-inch square tube hitch # 31080 fits all version of the 2001 Durango, including your 2-wheel-drive.
The hitch bolts on using included hardware and it requires no drilling. The linked instructions and help article will list the basic tools you'll
view full answer... - Availability of Front Mounted Receiver Hitch for 2000 Dodge Durango
- If your Durango is a 4WD model, we do indeed have a front mounted receiver that would fit. You'd need the Curt Front Mounted Receiver, part # 31080. We don't offer a front mounted receiver for a 2WD model.
For a winch mount, I'd recommend the Curt # C31010 which is compatible with the industry standard bolt pattern used by most winches.
view full answer... - Front Mount Trailer Hitch Receiver for a 2000 Dodge Dakota SLT Quad Cab 4x4
- You will not have to make modifications to your 2000 Dodge Dakota to install Curt front mount receiver # 31080. I have included a link to the installation instructions for you so you can see how the hitch installs.
The hitch can potentially get in the way of making it easy to get to the oil filter on the truck but we have not had any customers complain about that issue.
Some models of the truck will have an optional skid plate and if present that may need to be trimmed for the hitch
view full answer... - Is Mounting Hardware Included with Curt Front Mount Trailer Hitch for a 2002 Dodge Durango
- The Curt front mount trailer hitch # 31080 for your 2002 Dodge Durango includes all hardware needed for installation.
This kit includes:
6 - CM-SP6 - .250 x 1.00 x 3.00" - SQUARE HOLE SPACER
6 - 20-00062 - NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ
1 - FISHWIRE - 1/2" FISHWIRE
6 - 10-10287 - BOLT,CAR,1/2-13 UNC,1-1/2,GRD8,Y.
You will not need to purchase any additional hardware to mount the hitch.
I have included a link to the installation instructions for you to view.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
1/24/2023
Thats not very common to hear. Lets look into this a bit further. Do you have any photos of the line up? I am thinking that this could have been bent in some way or possibly defective.