Part Numbers: SB324-172,C31071
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.
Add-On Accessories
SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.
The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.
With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.
The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-069) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (111 Customer Reviews)
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.The hitch was well-made, and installing it was very easy. However, the design of the hitch is somewhat perplexing. The hitch receiver hangs about 3 inches lower than it needs to, which reduces the ground clearance on the front of the truck significantly. See attached photos. The hitch will work until I find something better, That restores the front ground clearance
Well so far so good. It was a little difficult trying to do it by myself, got most of it done and then had to go to a autobody shop down the road to tighten up the 4 bolts.
Bob
5/26/2023
It worked out great! We traveled to Key West from New England with only a couple of problems. Watch out for dips in the road, curbstones, large tree roots.
Have not opened the box yet, but am hoping for a perfect fit. Excellent communication on my order and delivery status…5-Star rating on customer service
Scott
6/4/2024
Awesome! Works great and I just used the front hitch to put a boat away in very tight quarters.
Overall it's a good light duty plow, works like it's supposed to, clears the snow with no problems. Originally purchased the plow with the hitch receiver mount, But the plow stuck out quite a bit in my opinion plus there was to much wobble. So I converted to the 2 point mount which brought the plow in closer and a lot less wobble.
There was an issue with the actuator, it would work intermittently when lowering the plow but Snow Bear covered it under warranty and sent me a new one.
My only gripe is that only after 3 months of Winter use, the whole plow was showing a lot of surface rust and the paint was peeling.
The hitch is mounted on our 2018 GMC 2500hd. We use it to transport our bikes. We choose not to mount items on our tv rear bumper.
This front hitch carrier has been a life saver for us. I reviewed all the bike mounting options I could find for our truck camper and decided that mounting the bikes on a front receiver hitch was the way to go. The customer service at the front end was excellent. I needed to be sure that the position of the hitch receiver would allow a) enough ground clearance, b) that the bikes would not be touching the front grill of the truck, c) that the bikes would not be sitting up so high that the view of the driver would be obstructed and d) that I would actually be able to do the install myself. Well, the customer service gal on the phone was very helpful and took a lot of time to research and answer all my questions and I felt confident that I was getting the right item. I was able to install the receiver in less than 2 hours with the help of my neighbor. The instructions were clear and the install went fairly smoothly. The end result is an excellent product that is very strong and durable and holds our bike rack perfectly. We have logged over 5000 miles since installing it last spring and I could not be happier with how things have worked out!
Overall it is a good setup, does the job it's suppose to. Had one problem with the actuator intermittently working when lowering the plow, but was replaced under warranty.
Originally purchased to use in a front mounted hitch receiver, but switched to the two point hookup which brought the plow in closer to the vehicle and made it a little more stable.
My only problem was after 3 months of winter use, paint was peeling and a lot of surface rust showing.
Had the front hitch in use for about a year. No issues...supports a front "cooler" rack that I modified and added a bike roack to the front of that...it performs the way it should....easy install...great produt...happy all around
Hitch fit perfect on my truck and the video was on point for installation. I had the hitch installed in 45 minutes and it looks great.
James
10/6/2023
Product works as described, I use it for my winch and use with my fishing rack on the beach.
Mike L.
10/19/2023
The product arrived packed poorly and deformed. When we requested an RMA we were told we were responsible for shipping costs. Zero stars. We repaired the defective item ourselves.
High quality hitch. Great install instructions. Not hard to install but you will need two people. May be possible with one person with truck on a lift.
It took me a little more than an hour to install the mount. It was a little tight but I used a come a long to pull it into alignment.
David
8/14/2023
Works great, fit well, easy to install, and allows me to place my ev-bikes in the front of the truck when traveling.
The Curt Front Mount Hitch is a great addition to any working man's truck. The fit is so tight that I had to bend the side frame tabs out a little bit to get it mounted. Once in place it mounted exactly as described.
Installed on a 2018 Chevy 3500HD (diesel)
Product arrived as scheduled in a shipping box that was damaged in transit. Upon inspection of the contents, it was determined everything was fine and all installation parts were securely attached to the hitch. It's understandable that a cardboard box with a 35 pound steel frame will get some damage in handling.
Installation: Absolutely watch the video online, it is extremely helpful! I jacked up the front of my truck about 6 inches and set jack stands in place on the jacking blocks behind front wheel wells. I also removed the plastic debris guard (4-15mm bolts) for easier access to the mounting points. I must say, the threaded pull wires are a wonderful addition that made the installation flawless! Take your time and follow the enclosed instructions (and video) and it should take you about 30-45 minutes. I am an average mechanic at best and this was a really easy install!
Be aware that adding the hitch up front will require you be careful with parking curbs, however I think the hitch is stout enough to insure it will destroy a concrete curb. Probably best to avoid testing that theory.
I test mounted a motorcycle carrier on the from of the truck and loaded up a KTM 690 Duke. (315 lbs) Virtually no sag in the front suspension and to bike should ride well with proper pads & tie-downs. Makes for an interesting hood ornament ;)
All in all, a great product and vendor. You can buy with confidence.
Tahoe K.
1/25/2020
Stout Hitch
Very easy front reciever install, I was able to do it by myself with a hydralic floor jack. And no bumper modifications needed
I really like the front hitch. I use it to haul kayaks when I'm towing my fifth wheel.
My only complaint is that it significantly decreases my front end clearance. I now tend to hit ground while going through dips.
Other than that, it's been great.
Overall quality looking hitch. The side-flanges were not wide enough to fit around my ‘16 Sierra 3500 frame which was extremely difficult to install, especially with the fish-wire. Had to use a floor jack to push the hitch into place and remove the skid plate and thankfully there was an access hole in the frame where the flange-bolt goes. Did not want to cut a hole behind the license plate so this was the only option and would buy again if needed but the flanges should be 1/16th to an 1/8 of an inch wider.
Ryan
5/25/2021
Had to remove, to low to the ground and kept hitting everything.
Came a day early now to install looks good can't wait to see how it fits
etrailer needs to package their hitches better... I have received 2 of them and both boxes they were shipped in were just about destroyed! They were full of holes and tape covering up holes! Please package them better!!
Jenny N.
3/22/2022
I will have our Customer Service team reach out to you.
I searched far and wide for a front hitch for my 2018 GMC 2500 HD Denali, most will not fit the Denali for some reason. This one did so with no trimming of the air dam, it's a perfect fit and only took about 45 minutes to install by myself. This will be the second truck I've owned with a front hitch and it seems like a necessity at this point, they're great for bicycle racks, winches, kayak racks, you name it!
Very well built, relatively easy to ins tall.
Shipping box was trashed, all attaching parts were very well protected and nothing was lost. Installation was exactly as the video explained with no issues. Haven't used it yet.
The Curt hitch assembly arrived in excellent condition. As usual, George did a fantastic job of getting my order to me very promptly. The installation went perfectly and exactly as shown in the video on the etrailer.com website. The front hitch fit was perfect on my 2015 GMC Sierra.
D W.
9/13/2016
Ive driven thousands of miles with my bicycle rack attached to the Curt front receiver. The Curt front receiver has performed perfectly. The best thing is I didnt have to cut or alter my truck to install it.
We added this hitch to the front of our GMC Sierra 1 ton and carry 2 ruckus motorcycles with us camping. This is a 500 lb. load upfront and carries wonderfully. It does hang low under the front bumper, so you will hit the curb if you park straight in. It will also hit a steep driveway. A lift kit for the truck is a possible cure but we carry a large camper and would be top heavy. We would buy this product again in a heartbeat as it is well constructed and easy to install in minutes.
Tom D.
6/24/2020
Still love it, but rough roads are a no go without lifting our truck. There are many asphalt marks from Jasper to Yellowstone.
Mounted the hitch yesterday. Trying to get time to assemble the balance. And I retired???? Oh, golf today.
Ronald T.
6/4/2023
Works great. I have used it twice to take my Kayak to the Sierras. Works well with my truck while pulling a Grand Design 5th wheel
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 2500 Accessories
Christopher
4/21/2023
Great, except for the reduced front clearance as indicated in my review