bing tracking image

Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: K2AVAL8826ELT,31302

Retail:$3,034.94
Our Price: $2,683.40
You Save: $351.54
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall
part number: K2AVAL8826ELT

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.

Features:

  • Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Electric actuator raises and lowers plow smoothly and consistently
    • Wireless remote control lets you operate plow from the warmth of your cab
    • Internal clutch prevents damage caused by overextension of actuator
    • Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
  • Strong rubber deflector on top of plow directs snow down and away from your windshield
  • Hardened steel edge breaks up packed snow and ice
  • Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
  • Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
    • Can extend life of the plow if you hit an obstruction
  • Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
    • Wheel height is adjustable to match your vehicle height
  • Plow handle with knob lets you easily move plow up and down during mounting
  • Safety chain holds plow in raised position during travel
  • Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
  • ISO certified
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver


Specs:

  • Application: 2" x 2" hitch receivers
    • Cannot be used with hitches or receiver adapters that have built-in drops
  • Blade dimensions: 88" wide x 26" tall
  • 3 Blade angles:
    • Left 45 degrees
    • Straight ahead
    • Right 45 degrees
  • Distance from center of hitch pin hole to the front edge of plow: 50"
  • Weight: 296 lbs
  • 1-Year limited warranty


Detail K2 Plow Length

The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.


Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


Detail K2 Hitch Mount

To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


Detail K2 Caster Wheel

The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.


How to Plow

Detail K2 Adjustable Plow Position

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Smooth, Controlled Lifting with Electric Actuator

Detail K2 Elite snow plow actuator

The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.


To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.


This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.


Detail K2 Features

Detail K2 Skid Shoes

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.


Detail K2 Blade Stiffener

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.


Detail K2 Trip Springs

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.



AVAL8826ELT Detail K2 Elite Hitch Mount Snow Plow - 88" Wide x 26" Tall Blade



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31302

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31302 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall - K2AVAL8826ELT

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31302

Average Customer Rating:  4.8 out of 5 stars   (181 Customer Reviews)

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: David07/12/2023

How it was received; either is was mail destroyed or UPS did this in the process. No telling what parts are missing, waiting for UPS to come pick this and E-Trailer to send out replacement.

I thought these product would be packaged better from the factory for shipping resilience.

Etrailer Expert

Katrina D.

7/17/2023

I am sorry to see this arrived in this state. I see that our customer service department has uploaded a claim. Once this is corrected we would appreciate your updated feedback.



by: Rodney12/14/2023
2005 Ford F-150

Love the plow.
Only downside is the outside
bottom corners have bent backwards while plowing. I will have to straighten and reinforce those areas. I plow six different driveways. I was using a 4whlr plow for these before and it would take me several hours to all day, with this plow its less than 4hrs including driving time and I have vehicle heat. I've had many people looking, commenting and asking about this hitch system. I recommend it and give them the etrailer site for information and purchasing advice. This system is very impressive. Thank you.



by: Paul T08/18/2016
2005 GMC Sierra

This hitch was very easy to install....I had to trim the lower air dam to fit around the receiver and that gives it a clean neat look.
I didn't like that I had to remove and leave the shields around the tow hooks off. But overall I'm very pleased.
I plan to use this hitch for maneuvering a camper in a narrow spot beside my home, and for a bike rack when towing a camper.

Paul T.

11/2/2017

The Curt front hitch is GREAT!I use it to help move my camper beside my house which is lacking clearance to back in. I will certainly install one on my next truck.



by: Olen09/19/2022

Of the many hitch receivers I have purchased, the front mounted ones have never failed to surprise me of their usefulness! From bike racks, to carrier for coolers, to my chainsaws, gas and oil, they make it work. Recently while cutting wood for a hunting lease engagement, I put a second ball on the front and used it to drive a 16' trailer up a hill to get the wood where it was needed for offloading. Backing it up had resulting in damaged trucks, trailers and numerous attempts. Using the front hitch it was a one and done deal! Love it! I have even used it to pull trees over when felling. I don't have enough fingers and toes to count the uses! If you have ever thought about it, just stop and order! You won't regret it!



by: William04/11/2013
2003 Chevrolet Silverado 1500

I gave this hits only 4 stars since all of the available information indicated it would bolt right on to my 2003 Avalanche 1500 (All Models) with no modification, but it wasn't quite that simple. First off, my Avalanche has the plastic cladding. The end brackets of the hitch push the bottom of the air dam under the bumper down a bit and make it bow out. I had to remove the bracket that secured the air dam to the center of the frame. I mounted the hitch in the upper position since I didn't want it to be so low, and the receiver ends up being 8" back from the bumper facia. I had to order an 8" extension to bring it out past the bumper. Other than that, I'm happy with the hitch. I just wish the fitment guide was a little more specific.

Bryan C.

8/13/2013

Did the hitch still come out under the cladding? Or do u need to make a hole for extension? Thanks Bryan 2004 avalanche with clading

William

8/20/2013

Since I installed the hitch in the upper position, I had to cut a hole through the claddingbumper. This came out near the bottom of the license plate recess. I then use the 8 extension if needed. This brings the receiver out in front of the bumper.



by: Ron t03/10/2015
2006 ChevroletSilverado

I have a 2006 Silverado 2wd LD truck and mounted a curt front trailer hitch ... I mounted both side plates first without tighten down.. I then mounted the 2" receiver section ... Tightened that down then,finished cranking down side brackets !!!!! Done !!!! However I did have to cut the backside of the tow hooks facia plastic with a jig saw no problem ... I never cut into the cup portion I just cut some of the extra plastic in the back off DONE !!!!!!!



by: Leon Thompson10/08/2020

I have had this on my 2005 Chevy Silverado for a year. I have used it to hold a Yakima bike rack once but mostly to carry a large toolbox for camping trips. Easy to install. I kept my plastic air damn on and just cut out a square hole for the hitch.



by: Mark S.09/18/2014

The shipping was quick. Installed easily. The hitch is visible just below the fascia at the bottom of the bumper. I had a front hitch on my previous truck (Tacoma); also from etrailer. I use the front hitch to move my travel trailer into tight spaces.

Originally, with this recent purchase, I had purchased the incorrect item. All it took was an email from the staff at etrailer. The email contained product return instructions along with an RGA#. I just returned yesterday. This extra customer service made the return process quite simple.

With all my needs regarding hitches, etc. I will always check etrailer first.



by: Brian08/09/2012
2004 ChevroletSilverado

Installation extremely easy, line up holes and bolt together, that simple. No trimming required.
Purchase front hitch to park 29 FT. camper at a cramped storage facility. Dropping the camper off now is as easy as picking up the camper.
All parts well packed. Website easy to use, prices are right and easy to track shipment. Would purchase from website again.



by: David06/23/2020
2000 GMC Sierra

Perfect fit, quick and easy installation. Only took 25 minutes by myself. I would highly recommend this hitch. Plan using it for bike hitch, winch, cargo platform, etc.

David

6/24/2021

Fantastic, use it all the time for hauling bikes when I tow my RV



by: Patrick11/14/2020

Let first say , working with Emily was great. I had an issue with the first hitch not fitting . She helped me order a new hitch that went without a hitch , no pun intended. New hitch is installed as you can see in the picture. Installation was a snap. Already doing work. Thanks again will buy from you all again.



by: James10/23/2023

This plow does not stand up to much use. I used it for my long gravel driveway and I was dissapointed in the durability of the plow. The plow bent near the cutting edge and twisted when I accidentally bumped into a rock when turning around. This plow is for light use only and it does not back drag snow well since it is light and does not have any down pressure.



by: Patrick F11/12/2021

Anything I get from etrailer and Curt hitches always works! This front mounted hitch will be no different, providing I can put it on tomorrow if it’s not raining! I will continue to buy here!

Patrick F.

11/13/2022

Still working great as all the hitches I have purchased from Curt have done. I will be buying another for my pickup truck as well!



by: James09/16/2022

Trailor hitch receiver not long enuff,warn winch hits bumper. (02 chevy silverado,4 wheel drv,ext cab) had 2 make tube extention w/5/8 pin holes. Not able 2 ride around w/winch attachd, due 2 weight and length. Hav 2 take winch to place of use in bed of truk and then atach 2 mount hitch.

Etrailer Expert

Jenny N.

9/30/2022

I checked and for the 2002 Chevy Silverado 1500 LD I did not have a hitch that would provide a longer receiver opening.



by: Kim H05/24/2024

Ashley was very helpful, haven't mounted the hitch yet but did get under their held in place and its going to fit just fine. again thank you much , will do business with you.



by: Robert 10/19/2023

Works perfectly, easy to install,I used it yesterday to move my dump trailer through the woods to the wood shed.



by: John E.02/21/2017

My front mount hitch arrived with in days of ordering. I watched the installation instructions video on your site before receiving it and it was a very easy install. Your company deserves 5 gold stars in my book. I'm a very happy customer!!!



by: David 10/27/2023

Installation was a breeze and easily done with simple hand tools most guys have in the garage. I' 77 and it took a little over an hour. Looks terrific!



by: Allen W11/01/2017
Ford Transit Connect

I can’t address the installation as the box arrived torn and some of the nuts and bolts were rattling in the box. Now I have to wait for the missing hardware. The hitch itself looks to be high quality and you would think that quality packaging would be a priority. All it would take is a heavy plastic bag wrapped in cardboard to protect the bag of hardware from ripping open in transit.



by: Brad11/22/2023

Product arrived a day early! Recommend this company for all your Trailer needs.



by: Mark10/28/2021

Good hitch, easy installation, fast shi pping.

Mark

10/30/2022

Hitch is great,but Im using it on a snow plow that has stabilizer bars that are supposed to align with the hitch crossmember. Because the hitch itself is mounted on the bottom of the crossmember, they do not align.



by: James 03/25/2024

fast safe shipping



by: Billy 01/04/2024

Easy to put together,easy to put it on and take it off my truck, works like it should



by: Alun J08/06/2016
2006 GMC Yukon XL

Excellent product and superior customer service. Instructions indicated it would take a professional an hour to install and a normal guy (me?) 2 hours.....well, I had it installed in an hour and five minutes and only busted one knuckle! Simple install, excellent fit, great shopping experience.

Not much of a photographer...but here are a couple pics

Alun J
Kenmore WA



by: Justin10/06/2016

Works perfectly for accessories on front of truck. I use it for a motorcycle carrier.


25
181
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Snowplow for 2 Front Trailer Hitch on One Ton Pickup
  • If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part # K2AVAL8826ELT for example is a great option with an 88" wide blade so it will be great for larger pickup like a 3/4 or 1 ton. It has a wireless remote so you can control the blade height from inside the cab on the fly and there are skid shoes so you can plow over uneven surfaces like gravel without damaging the blade. I
    view full answer...

  • Will the Detail K2 Snowplow # K2AVAL8826ELT Fit on My 2000 Ram 2500?
  • From your recent searches, I believe you are asking about the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT. This snowplow is confirmed to fit your 2000 Ram 2500 4x4 as long as you do not have the Sport submodel. We unfortunately do not carry any snowplows that work with a Sport. If you need a compatible front hitch receiver for your truck, I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604. Not only does this hitch come
    view full answer...

  • Snowplow Recommendation for a 2009 Ford Explorer Sport Trac
  • Our plows have some adjustability, but they don't have a power angle - to adjust the angle you will need to do so manually. For your application I recommend checking out the Detail K2 Elite # K2AVAL8826ELT which installs on your 2009 Ford Explorer Sport Trac using the Curt Front Mount Hitch Receiver # 31545. I like this snowplow because it's 88" wide x 26" tall, it has 3 different angle positions (left, center, and right), and it uses a chain-lifting design that does a great job at
    view full answer...

  • Recommended Snow Plow for a GMC Sierra 2500 w/ a Front Mounted Hitch
  • Since you already have a front mount hitch on your 2022 GMC Sierra 2500 then the Detail K2 Elite Snowplow item # K2AVAL8826ELT will work great for your truck. The Detail K2 Elite item # K2AVAL8826ELT weighs 296 lbs and requires a 2" x 2" receiver. Most front mounted hitches have a minimum capacity of 500 lbs so you are good to go. It has a wireless remote so you can control the blade height from inside the cab and there are skid shoes so you can plow over uneven surfaces like gravel
    view full answer...

  • Snow Plow Recommendation for 2010 Toyota Tundra with 2 inch Hitch
  • For your 2010 Toyota Tundra with a 2 inch front hitch we have great plow options like the Detail K2 part # K2AVAL8826ELT which can be raised and lowered from inside your cab with a remote setup but we do not have any options that allow you to remotely angle the plow blade from left to right. This plow is still adjustable in this way but you have to perform that adjustment manually.
    view full answer...

  • Would EcoHitch Front Hitch for 2013 Ram 1500 Work with Detail K2 Elite Plow
  • The Detail K2 Elite Snow Plow part # K2AVAL8826ELT that you referenced was designed to work with front hitches that install lower on the vehicle than your ecohitch. This would hold the plow much too high and would not work. You'd need a hitch like the Curt # C31015 which installs lower on your 2013 Ram 2500.
    view full answer...

  • Can I Use the Detail K2 Elite Snowplow on a 6-Inch Lift on a 1995 Chevy K3500?
  • I went ahead and reached out to the engineers at DK2, and they confirmed that with a 6-inch lift on your 1995 Chevy K3500, you will be able to use the Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8826ELT only if you attach the Replacement Cross Member Plow Attachment for Detail K2 Snowplows # K2CRM3312.
    view full answer...

  • What Front Hitch and Snow Plow Fits My 1997 Dodge Ram 2500?
  • Yes! The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 is confirmed to fit your 1997 Dodge Ram 2500 4x4 with the Cummins engine. The hitch comes with all mounting hardware included. Also, you will be able to attach the Detail K2 Elite Snowplow for 2" Hitches - 88" Wide x 26" Tall # K2AVAL8826ELT to that setup. If you need a hitch pin for the plow to attach to the hitch, I recommend the # C21504.
    view full answer...

  • Installing Curt Front Mounted Receiver on 2004 Chevy Tahoe
  • According to the installation instructions, which you can see by clicking the provided link, a 2004 Tahoe 1500 would require no drilling to install.
    view full answer...

  • Availability of Front Hitch for 2003 Cadillac Escalade EXT
  • We do carry a front hitch for your 2003 Cadillac Escalade EXT. For that you would want the Curt Hitch part # 31302 which is a confirmed fit. I attached an install video that shows the hitch being installed in a similar Chevy Tahoe.
    view full answer...

  • What Modifications are Required to Install a Front Mount Trailer Hitch on 2003 Chevy Silverado 1500
  • The Curt Front Mount Trailer Hitch, # 31302, can be installed on your 2003 Chevy Silverado 1500 HD in two ways. It can be installed with the hitch receiver through the bumper which would require a 3 inch square hole to be cut into the plastic fascia, or it can be installed under the bumper which requires no trimming. The receiver opening will protrude far enough out so insert/remove the hitch pin without having to go beneath the truck. The instructions do not mention relocating the front
    view full answer...

  • How Far from the Frame Does Curt Front Mount Trailer Hitch # 31302 Hang
  • When in the through bumper position, from the bottom of the frame to the bottom of the cross tube it looks to be approximately 8-1/2 inches. I have included a link to the installation instructions for you to view. Through bumper configuration requires a 3 inch square hole to be cut into the plasitc fascia. Position the hole on the vehicle center line 3 1/2 inches below the top edge of the plastic fascia.
    view full answer...

  • Is Underbody Trimming Required for Front Mount Trailer Hitch Installation on a 2005 Chevy Suburban
  • For a 2005 Chevy Suburban 1500, nothing needs to be trimmed according to the installation instructions which I have linked for you for the Curt Front Hitch, # 31302. Model year 2006 and up do have to be trimmed but not the 2005.
    view full answer...

  • Front Mount Trailer Hitch on 2005 GMC Sierra 1500LD 4x4
  • The Curt hitch # 31302does not require any drilling on your 2005 GMC Sierra 1500LD 4x4, however, trimming of the front air dam and possibly the fascia may be required. The installation instructions have been linked for you.
    view full answer...

  • Front Mount Trailer Hitch for a 2005 GMC Yukon Denali
  • If your 2005 GMC Yukon XL Denali is a 1500 then yes, Curt front mount hitch # 31302 will fit. If you have a 2500 then you would need to use # 65028. If your Yukon is not an XL model hitch # 31302 will still fit but you will likely have to trim the front air dam to accommodate the hitch. I have linked the installation instructions for you.
    view full answer...

  • Front Mount Trailer Hitch Recommendation for a 2000 Chevy Silverado 2500 Light Duty
  • For a 2000 Chevy Silverado 2500 light duty, you can use Draw-Tite front hitch # 65028. You should not have to do any trimming on the truck for installation. I have included a link to the installation instructions for you to view.
    view full answer...

  • Is There a Front Receiver Compatible With Ranch Hand Grille Guard On 2004 Chevrolet Tahoe Z71?
  • Since the Curt Front Mounted Trailer Hitch Receiver # 31302 is going to mount in the same location and interfere with the supports on the Ranch Hand Grille Guard on your 2004 Chevrolet Tahoe Z71 you will not be able to use then together. Rather you would need to have something fabricated that will work with your grille guard. We do have the Weld-On 2" Receiver # E17 you can use to have a receiver fabricated to fit with your grille guard.
    view full answer...

  • Can the Curt Front Mount Hitch Support a Winch on a 1999 GMC Sierra Z71
  • Yes, the Curt Front Mount Hitch, # 31302, will be strong enough to mount and use a receiver mount winch. This hitch has a 500 lb vertical load capacity and a 9,000 lb line pull capacity. This hitch has a standard 2 inch receiver that is compatible with most hitch mounted winch plates. It is important to check the axle capacity of your front axle as well to ensure you do not exceed the capacity of the front axle. If you do not already have a winch plate, I recommend looking at the Curt
    view full answer...

  • Front Mount Trailer Hitch for a 2007 Chevy Silverado Classic 2500
  • The 2007 Chevy Silverado Classic 2500 requires a different front mount trailer hitch. From Curt, you can use # 31108. I spoke with my contact at Curt and from the bottom of the frame rail to the bottom of the receiver on the hitch once installed is 5 inches. I have included a link to the installation instructions for you. I have included a some pictures showing the hitch installed.
    view full answer...

  • Will Front Mount Receiver Fit with Brush Guard on a 2005 Chevy Suburban
  • Yes, the Curt Front Mount Trailer Hitch Receiver # 31302 will interfere with a guard, like the Westin E-Series Bull Bar # 31-5175, on your 2005 Chevy Suburban because they use the same mounting locations. If you are really needing to use the front mount receiver then you will need to remove the guard to do so. Let me know what you are trying to accomplish and I can see if we have other options out there to help you transport equipment!
    view full answer...

  • Front Hitch for 2006 Silverado 1500 LT
  • My contact at Curt confirmed that their front-mount hitch # 31302 is the correct fit for the 2006 Silverado 1500 LT crew cab 4-door and standard cab 2-door. It does NOT fit the extended cab 4-door. This USA-made 2-inch hitch has a 500-lb vertical load rating and a 9000-lb line pull rating. It also features a heavy-duty powder coat finish. It includes all mounting hardware. An install video is included for you. If your intended use for the front hitch is a hitch-mount snowplow like
    view full answer...

  • Installation Assistance With Curt Front Mount Hitch # 31302 on a 2003 Chevy Avalanche
  • In the attached picture, the mounting holes are noted. According to the installation directions for the Curt # 31302 hitch, you will have to remove your tow hooks on your 2003 Chevy Avalanche Z71, which will be the 2nd hole needed for installation. I have the installation instructions attached.
    view full answer...

  • Are There Two Different Ways to Install the Curt Front Hitch part # 31302
  • The Curt Front Mount Trailer Hitch, # 31302, can be installed on your 2005 Chevy Suburan in two ways. It can be installed with the hitch receiver through the bumper which would require a 3 inch square hole to be cut into the plastic fascia, or it can be installed under the bumper which requires no trimming. Check out the installation instructions I attached for this product for more info.
    view full answer...

  • What Front Hitch Can Be Installed Through The Front Fascia On A 2001 Chevy Suburban
  • For your 2001 Chevy Suburban the 4WD or the 2WD will not matter for the front hitch. The choice for your vehicle will be if it is the 1500 series or the 2500 series Suburban. If you have the 2001 Chevy Suburban 1500, the Curt Front Hitch, # 31302 will fit. Since you said your fascia has a square hole cut into the middle of it, the Curt Hitch, # 31302 world work great for you. The installation instructions on the Curt hitch says that it can be installed as a through bumper installation
    view full answer...

Info for these parts were:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Chevrolet Silverado Accessories