The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese…

One solution that seems to work well with the factory hitches of the 2017 Chevy Silverado 2500 would be shackles like the #358smallshackle which you'd attach to the loop on your hitch and then attach the safety chains to.

Yes, the pin hole you're talking about on the Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers #325-GH-064 is actually there so you can turn the ball mount 90-degrees in the hitch receiver and install the 1-7/8"…

From the center of the hitch pin hole to the center of the shackle bolt hole on the Curt Tow Strap Loop for 2" Hitches #C45832 is going to be about 4-1/2" (see attached photo).

That's a good question Mark, and yeah I agree, it would make sense for the screws to be on the bottom when using the Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers #GY28XR. It'll work either way, but they're on…

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball…

Hey Mark, thanks for the question, and while we have exactly what you're looking for, it's actually a different part number (the one you mentioned is for a long bed). I went ahead and verified for you the correct SuperHitch for your…

The Kodiak Disc Brake Kit part #K2R1058D11 Dexter 10 rated axles. They will need to be 8-288, 2 piece hub built from Feb. 1990 to Aug. 2009. Yours fits the age range so theres a strong chance this is the right kit.

I spoke with my contact at Tow Ready about the Tow Ready Combo Bar, part #80948. This is a 48 inch long bar that is used to fabricate 2 inch trailer hitch receivers. They told me this bar is used when they manufacture hitches with capacities up to…

Yes, we have everything you need to convert the electric drum brakes on your 2014 Kaufman Car Wedge Trailer to electric over hydraulic disc brakes. In order to do this you are going to need disc brake assemblies, trailer hubs, brake lines, and an…

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.

As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers I can only give you the measurements from one of our receivers so that you can see where it will sit on your truck. The Curt Trailer Hitch Receiver #C14082 is…