I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

I see what you mean with the additional support bracket below the frame on your 2024 Keystone Hideout Sport 175BH travel trailer.…

The black wire of the #K2WR100 does run to the negative post of the battery. I attached a picture that shows how it wires up. The picture might look a bit different since…

The part you referenced, Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket #HM40975, accepts a standard round U.S. Car connector which is the type supplied on the 2012 Tundra with factory tow package. Please see the linked photo…

Absolutely. The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 typically installs under the…

The Replacement Cutting Edge for Fisher Snowplows part #3371301308 and the Replacement Cutting Edge X-Plow for Fisher Snowplows part #3371301309 are the two options we have available in…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

I spoke with my contact at Snowbear and he told me that the kit you actually want is the part #SB324-120 which is the correct adapter for your older SnowBear plow and will allow it to connect to a 2 inch front hitch. Your dimensions listed match…

We don't have a video that details how to replace the strap of your K2…

For the replacement cutting / lead blade you will want to check out Replacement Cutting Edge #3371301220 and Replacement Cutting Edge #3371301291. Both blades are…

The Replacement 7 Quart Vertical Pump Assembly #LC251910 is the Lippert part number 731445 you mentioned needing. The 251910 was the old part number which was replaced by the current 731445 number you found.