When we installed the Curt hitch #13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches.

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…

In general, a properly selected and installed weight distribution system like the Reese Strait-Line #RP66082 will do more to improve the overall towing quality of a trailer than a set of rear air bags in the tow vehicle. The WD system actually…

There is no specific 'best' rise or length of ball mount for a given vehicle. Since the hitch and…

You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…

Yes, the Dexstar trailer wheel part #AM20334 will work great on an axle with disc brakes.

Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated…

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and Lippert 1621 HD - 18,000 lbs #325-GH-8040 you were looking at is rated for 18000lbs trailer weight and 3500lbs pin weight, so this will likely be the best option for you as long…

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is an approved replacement for 1621 and 1621HD pin boxes.

The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 18,000 lbs - 3.5K TW #325-GH-8040 weighs 125-lbs. However, after speaking with the tech and warranty department over at Lippert, the Gen-Y pin boxes are not…

DeadBolt Trailer Hitch Receiver Lock #e98882 is stainless steel and made in the USA. It has a span of 2-9/16 inches though. It is the only USA-made stainless steel hitch lock we have.

The Thule Xsporter Pro Mid Overland Truck Bed Rack #TH34RR is a confirmed fit for your 1998 Ford Ranger and has an overall height of 16" from the bed rail to the top of…