While we do not carry that particular Lippert step we do have the similar MORryde #MR98RR or a better option in my opinion is the TorkLift GlowStep #TLA9104. I prefer this step as it folds up nicely and works better in tight areas like storage…

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes,…

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

I went out to the warehouse and measured the bayonet fittings on both ends of the 3" diameter Viper RV Sewer Hose #D04-0475. As you can see from the attached photos the end with the nubs on it measured 4-1/4"…

To give yourself 40 feet total of sewer hose you would need two of the #CAM39611 which are 20 feet long and then to connect them you would need the coupler part #CAM39203. For a 4 in 1 adapter to use on the hose you would need the part #CAM34971 as…

The Lippert Waster Master RV Sewer Hose, #LC359724, is designed to be stored in the under bin compartments of RVs. The hose and nozzle will not fit in the bumper style storage tubes. I do have a solution for you. The Valterra Viper RV Sewer Kit…

The RhinoFLEX RV Sewer Hose Extension with Swivel Lug and Bayonet Fittings #CAM39765 and similar items do have removable orange fittings but there are not replacement parts available. If you have the fittings then you just need the hose #CAM39671.…

According to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV instructions you finger tighten the inner jam nuts first and then tighten the outside jams nuts next for the installation. For removal you'll just reverse these…

Hey David; I checked directly with Pace Edwards for you and can tell you that the rails on the Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE46QJ will protrude just under 3/4" on both sides when installed on your…

Entry door locks, like the Bauer Products #BA64FR, typically will have a sticker on the inner handle portion that sits inside your RV, but I have installed a few where they also have the key code on a sticker on the inner components of the handle.…

I believe we have just about everything you need, ideally we'd need you to measure your center bolt and u-bolts to make sure the here will fit. So, for a center bolt you can use the Leaf Spring Center Tie Bolt with Nut #38-3TB which…