Filter Products
Filter by Dimensions
$32.29 - $32.29
$34.61 - $34.61
Videos
for Power Steering Coolers
Help Articles
for Power Steering Coolers
Expert Answers
for Power Steering Coolers
The trailer hitch I recommend for your 2008 Honda Odyssey is the Draw-Tite Max-Frame #75270 because it doesn't require any fascia trimming (like the etrailer and Curt might). This, as well as the other trailer hitches, exceeds the weight…
view full answer...I took a look at the online owner's manual for your 2005 Honda Pilot. It states that this vehicle, if equipped with a transmission cooler and power steering fluid cooler, has a maximum towing capacity of 3,500 pounds for a standard trailer.…
view full answer...The transmission return line on your 2005 Honda Pilot can be located between the frame crosstube and the drivers side support bracket (see photo). The return line will be the line closest to the front of the vehicle. We installed Derale Series 8000…
view full answer...The main differences between the available transmission coolers is the style of the coolers and the size. There are style that are more efficient that others, and obviously the bigger the cooler the more efficient it is as well. The tube-and-fin…
view full answer...I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part #118521 which is plug-n-play. Then you…
view full answer...The best way to pick out a transmission cooler for a vehicle like your 2005 Honda Pilot would be to go with the biggest one that will fit the available space the vehicle has in front of the radiator/AC condenser. I would go with the #D13503 over…
view full answer...Yes, the etrailer Trailer Hitch Receiver #e98851 is designed to be compatible with a full sized spare tire on a 2006 Honda Pilot. If you will be towing a trailer with your Honda Pilot you will also need a vehicle wiring harness. I suggest part…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The Class of transmission cooler you use will depend more on where you can mount it. The most efficient place is in front of the AC condenser. You could then use a Class I cooler, like #D12901. If mounted behind the condenser, I would go with a…
view full answer...The Dexter Nev-R-Lube 6k hubs use 42 mm bearings so the correct replacement is the part #31-73-3.
view full answer...I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because…
view full answer...I have a solution for you, but you're not going to be able to use the #RVS-OA04 in order to connect to a camera with a 4 pin female connection. We also do not have a 4 pin male to 5 pin male adapter available that would allow you to bridge…
view full answer...