Videos
for Portable Bathroom
Help Articles
for Portable Bathroom
Expert Answers
for Portable Bathroom
In regards to the Linxup GPS Tracking Device part #300-AT3, once you install the GPS device, you'll be ready to choose and set up the Linxup service plan that works for you. When you purchase a service plan, you can download the…
view full answer...For your application the Lilnxup GPS Tracking Device, part #300-AT3, would be the way to go. It installs anywhere on your trailer.
view full answer...I spoke to Linxup and they informed me that if the battery is completely drained on the Linxup GPS Tracking Device #300-AT3, that it would take between 4-8 hours to fully charge the battery. Once charged the battery will last up to 3 months as…
view full answer...My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…
view full answer...I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…
view full answer...There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…
view full answer...According to Lippert, the correct replacement for your 9010000464 model Kwikee Revolution Steps is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series #LC3725791. If you want the complete assembly with the…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we…
view full answer...The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.
view full answer...Yes. The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K #AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2…
view full answer...If your vehicle's plug was factory installed, I would start by checking to see if you have a blown tow package tail light fuse. I've attached an image from your owners manual highlighting the position 3 location to…
view full answer...What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…
view full answer...