Videos
for Phone Holder
Help Articles
for Phone Holder
Expert Answers
for Phone Holder
The tank that comes with the Air Lift WirelessAIR Suspension System for Air Helper Springs #AL27DQ is a 2-Gallon tank. When it comes to the physical dimensions, the tank measures 17" Long x 8" Tall x 6" Wide (see…
view full answer...Yes, they do. The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F95FV will fit the dually and single rear models of the 2024 Ford F-350 4WD. These air bags have a 7,500 lbs capacity that will level out the rear end of your…
view full answer...The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV will be just fine if you need to lift your 2022 Ford F-250 Super Duty, but it will be good practice to lower the psi rating to 5 prior to lifting the truck. I confirmed this…
view full answer...Thanks for the picture of your AC unit. Based on that for a white replacement you would need the part #DMC46FR.
view full answer...The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 #AKHD-555-35-K will fit the spindle on your trailer to replace your AL-KO 8700 hub, but this does have a 5 on 5-1/2" bolt pattern. My information is the…
view full answer...Yes, you are seeing it correctly on some of the item #306-X7315 photos. That's 100% installation error. They're not cutting enough of the fascia off to let the safety chain plate clear it. The Curt Trailer Hitch item #C11422 does not…
view full answer...The overall width of the drum would be around a 1/2" wider than the shoes on the backing plate but this will not be relevant when selecting replacements as the parts will be based on the dimensions of the backing plate which in your case is…
view full answer...The Dexter 3,000 lb trailer axles use a different size of brake assemblies so what you'd need is the Dexter 3k axle brake assemblies part #K23-472-473-00. 3,500 lb trailer axles use a slightly different size assembly so they would not fit. Then…
view full answer...The Dexter Electric Trailer Brake Kit #K23-472-473-00 are 10 x 1-1/2 brake assemblies that fit your 008-418-02 hubs, but those particular hubs are not available as replacements. If you sent me both the inner and outer bearing numbers from your…
view full answer...A Dexter 3K axle would use 10 x 1-1/2 inch brake assemblies versus the 10 x 2-1/4 inch assemblies typically found on a 3.5K axle, so you'll want to use the #K23-472-473-00 brake assemblies you'd looked at. The #23-468-469 brake shoes are too…
view full answer...The Dexter 2,800 Lb Axle uses a 10 x 1-1/2" braking assembly so you can replace these with the Dexter Electric Trailer Brake Kit part #K23-472-473-00.
view full answer...For a vent cover to use with the Ventline E-Z Lift Ventadome #V3092-601-00 so that you can attach to the four mounting brackets of the vent you would want to use one specifically designed for it. For that you would want the MaxxAir Cover part…
view full answer...