Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

The Curt Trailer Hitch Receiver #C14012 you looked at fits the cargo van and passenger wagon models of the 2020 Ford Transit T350. The extended high roof won't impact fitment so you will be able to use this hitch on your…

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…

Hi Sean, We do offer the Ground Control 3.0 for prepped trailers part number 2021106810 as part #LC52ED. This is going to include the rest of the components needed to complete the system. Since we don't have a video of this…

Factory brake controllers seem to unfortunately be very temperamental and usually quite a bit more expensive that an aftermarket brake controller so I have to recommend going with an aftermarket option. Luckily there is a brake controller port so…

Hey Tim! Yes, the Rhino-Rack Ski and Fishing Rod Carrier #RR572 will fit the older Thule square crossbars. While this kit does come with T-Slot hardware, it also has the clamps which is what you'll use for the square crossbars.

Hi Shelly, thanks for the question and it's possible we have something depending on the dimensions of your skylight/sunroof. What most people use for this is the Camco Lights Out Retractable Shade for RV Roof Vents #CAM42913.…

One afternoon a while back I was with a friend and we decided we needed a quick pick-me-up so we stopped at a coffee shop. He got a plain ol' coffee and I got an espresso; since espresso has more caffeine in it, I queried his…

The height setting you'll need to use when installing the Curt A16 head part #C16520 that you referenced is going to be based on what your trailer needs to sit level. The height of the head is adjustable as well as how the pin…

The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well…

The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll…

Both the Recessed #e69RR and Surface Mount #e79RR table leg kits are going to use the same 27" long table leg. The 26-1/2" and 28-1/2" measurements you see on our site are the heights…