Videos
for MOLLE Panels
Help Articles
for MOLLE Panels
Expert Answers
for MOLLE Panels
The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could…
view full answer...Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.
view full answer...To start with, the Kuat Ibex Truck Bed Rack #KU36ZR is designed to fit a 2022 Toyota Tacoma with a 6 foot bed (with or without the Deck Rail System), so just double check your bed size to be sure. If you have the 5 foot bed, you will need the #KU29ZR…
view full answer...I spoke with Yakima and they informed me the dimensions of the Yakima MajorShady 270 Awning part #Y82AV while closed are approximately 90" long. The bolt spacing at the rear is 4-1/2" for the clamp to the awning and 3-1/2" on the bar.
view full answer...For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…
view full answer...There is indeed a front-mounted trailer hitch that fits your 2024 Ram 2500, from Curt, at the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR I verified this fit directly with the manufacturer for you, and it fits…
view full answer...Yes, it does fit the diesel 2023 Ram 2500 trucks. Our website can be confusing sometimes when it comes to diesel engines but I assure you that the EcoHitch Hidden Front Mount Trailer Hitch item #EH37FR fits both the diesel and gas models. This front…
view full answer...The channels of the RetraxONE XR part #RTT-82383 are a standard size which means standard roof rack t-bolts like the #853-5715 would work.
view full answer...I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…
view full answer...Hey James, for the Yakima HD Overhaul rack the replacement bottom infill is the part #Y01166-LC and the top is part #Y01166. The bottom and top channels of the bars are the exact same dimensions so either will fit in the other but the profile of the…
view full answer...Yes, you can fit two of the Malone SeaWing Kayak Carrier and Load Assist #MPG113MD on your A.R.E. cap on your 2021 Ram 3500. Your Ram's truck bed is more than 66 inches, and assuming the A.R.E. cap is roughly the same width on top, two of the…
view full answer...Hey Brian, I reached out to my contact at Yakima regarding the Bottom Infill #Y01166-LC. Unfortunately, they do not have a dimensional drawing or cross section that they could send. Nor do we have any in stock here so I can't go grab one and…
view full answer...