Videos
for Folding Bikes
Help Articles
for Folding Bikes
Expert Answers
for Folding Bikes
The Montague Paratrooper Pro Folding Bike #PROBLK18 with the 18" frame is going to be better suited for a shorter rider whereas the Montague Paratrooper Pro Folding Bike #PROBLK20 with the 20" frame would be better suited…
view full answer...One of the great things about a folding bike like the Montague Paratrooper #PARDC18 is that it's compact and easy to ship, so this bike comes almost fully assembled out of the box; all you'll need to do is unfold the bike and…
view full answer...The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…
view full answer...The Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel item #AM31994 are not balanced nor do they need to be.
view full answer...I do have a potential solution for you. We do not recommend using the NOCO Genius charger and Jackery power bank combination. The battery bank will only last so long, and would require regular recharging. Also, it is not recommended to use a power…
view full answer...The rubber pads for the Rhino-Rack XTray Clamp Set unfortunately are not sold separately so you would either need to reach out to Rhino-Rack to see if they could ship you them or purchase a replacement clamp set #RRSP112.
view full answer...We have the Montague Paratrooper Folding Bike - 24 Speed - 26" Wheels - 18" Aluminum Frame #PARDC18 and Montague Navigator Folding Bike - 27 Speed - 700c Wheels - 19" Aluminum Frame #NAVDC19. The Urban…
view full answer...The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd…
view full answer...I checked with Draw-Tite and they list the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR as a fit for a 2023 Honda CR-V all models so you will be good to go with a Sport Touring. I took a look at some of the review and there were…
view full answer...Although the #TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use #TLF3001 or #TLF3001A for an aluminum/stainless tie down.
view full answer...