Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that…

Hey Parrish, There was a design change in the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 so it unfortunately only comes with one hitch pin hole now and there unfortunately are no other compatible hitches available with a second hole for a…

The safety chain hangers are mounted in different locations is the only difference between the Hidden Hitch item #DT98GR and item #DT97YR. Both hitches are confirmed to fit a 2023 Toyota RAV4 hybrid. They have a removable…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to…

Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit…

The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.

I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.

A leveling jack such as #JSC-24 is not designed to lift your trailer off the ground, it is only meant to provide support to your camper. To change a tire on your trailer you would want to use a bottle jack such as #ALL620471.…