Trailer stabilizer jacks like #TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more. What you're looking for is a jack…

Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To remove the 3" cap on your Valterra Sewer Drain like #T30A I recommend using the FloTool GRIPTECH 3-Position Adjustable Pliers #FT10627GT which can be adjusted between 2-3/4" and 4" to give you extra leverage in removing…

Hey Vaughn, thanks for reaching out! The max psi rating of the Americana Aluminum Mod Trailer Wheel #AM22646 will be the equivalent to the rating of the valve stem that you install on it. The Americana Metal, Bolt-In Valve Stem #AM20906 can handle…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I confirmed with EcoHitch and their Trailer Hitch Receiver #EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option.

Hey Kevin, so we don't carry Pullrite but I tried to see if they carry a Superglide that fits the OEM pucks of your 2024 GMC Sierra 3500 and it seems like they do but I wasn't able to get an exact part number but I do have a great…

The hardware with our etrailer Receiver #e85AR for your 2009 Jeep Liberty is M12-1.75 thread. We do include this size in our Metric Tap Kit #PT22FR if you do not already have it. A Brush #814092 will also help you clean out the threads with some…

Since our etrailer Trailer Hitch Receiver #e25TR mounts to the rear of the frame behind the bumper impact structure on your 2024 Subaru Outback Wilderness it will not require removal/loosening of the heat shields. There is enough room to get to the…

I can tell you John, I had the same concern when I installed a receiver on my Acura RDX. While my receiver did not entirely prevent the use of the kick sensor for the hands free liftgate it did limit the area I was able to kick due to the receiver.…