You will need 1/4" bolts for the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs - 4 Wheel Set, part #EM98CV. The length of the bolts will depend on your trailer, but I 2" bolts will…

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are…

If the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM98CV are all coming loose, there is definitely something odd going on. First thing you will need to check is the release levers. You will need to make sure they are not…

The correct screw/bolt size for the Erickson ATV E-Track Tie-Down Kit #EM98CV is 1/4". The best hardware will depend on your exact application and the material and thickness you're attaching these too. If your…

The safest way to secure a 4-wheeled vehicle like a golf cart in a truck bed is to use wheel nets that secure to the truck bed in some manner. The Erickson E-Track Tie-Down Kit #EM09160 is one option that is similar to the Pack 'Em…

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

Hey Gary, thanks for reaching out! The best way to keep the Erickson ATV E Track Tie-Down Kit #EM98CV from corroding is to use a type of spacer, like polypropylene tape, to keep the metals from touching.

The chocks of the Erickson ATV E-Track Tie-Down Kit #EM98CV are designed to be driven over as they are bolted to the floor.

For a trailer with a 4.80-12 tire size you would need either a 4-Lug #AM20124 or 5-Lug #AM20134 wheel. We do have these with tires already installed as the 4-Lug Package #AM30630 or 5-Lug Package #AM30670 so you can just bolt them on and go.

Yes, the Erickson ATV E-Track Tie-Downs #EM98CV includes wheels chocks and straps for four wheels and will accommodate vehicles weighing in at 3000lb maximum with tires between 10" and 30" in diameter. Since your 2006…

Erickson does offer a zinc-plated steel backing plate for use with their E-Track products like their ATV E-Track Tie-Down Kit #EM09160. Use part #e96RR. You can see this item's hole dimensions and spacing in the linked photo. Since your…

Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item #L11390 that comes with the CE Smith Trailer Idler Hub Assembly item #CE13515. You can use your blue marine grease but you…