Filter Products
Filter by Mirror Type
$8.45 - $13.20
Videos
for ATV-UTV Mirrors
Help Articles
for ATV-UTV Mirrors
Expert Answers
for ATV-UTV Mirrors
There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information.…
view full answer...The part number you gave is no longer a valid number for Bulldog jacks. It sounds like you are looking for the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 15" Lift - 5,000 lbs #BD190754. This has a 5,000 lb lift capacity and…
view full answer...It is really not a great idea to drive with a trailer cover like the part #052963735635 installed on a trailer. The only way I could safely recommend you do so is if you were to keep the speeds under 25 miles per hour and you weren't on a…
view full answer...If you have more of the weight in the trailer on the left side then that could explain the uneven wear. Axles have a bow or camber in the middle. When weight is in the trailer it straightens out the axle some and the tires should wear evenly. When…
view full answer...Actually on brake magnets for trailers either wire can be used as the power or the ground so the colors don't really mean anything. Most likely the magnet manufacturer just put what ever color was most convenient on your trailer.
view full answer...Brake magnets are made to fit their specific brake assemblies. They are not made to be interchangeable between brake sizes or weight capacities. Some manufacturers do use different color magnet wires that correspond to the capacity. We know that…
view full answer...Most likely the new axle has self-adjusting brakes which when new are known for feeling pretty weak. The good news is that you can keep applying them over and over while the trailer is traveling and they will tighten and get more sensitive feeling.
view full answer...I would check the magnets for wear before going on to test them with a meter. If the magnets show abnormal wear or if you can see the windings beginning to show through the friction surface of the magnet then they will need to be replaced. To further…
view full answer...With an unkown axle it is hard to know what it's capacity would be. Plus a trailer's capacity is more than just the axles it uses. You have to consider the suspension, the frame, coupler, brakes etc. The part #20440I-EZ-60 that you referenced…
view full answer...Yes most of the T@G campers I have seen use the Yakima 54" Tracks for Roof Racks part #Y01127 base tracks. You can get evrything you need in one kit with the Yakima HardTop SL Roof Rack - 60" CoreBar Crossbars - 54" Tracks part #Y01618…
view full answer...The Draw Tite #75601 and the Curt #13358 that you referenced both are a fit for your 2017 Mercedes Benz Sprinter 2500. They have very similar ground clearance but the Curt has the slight edge as it seems to sit a bit higher. I attached a picture that…
view full answer...There isn't going to be any noticeable difference in the fit between the Draw-Tite Trailer Hitch #75549 and Curt Trailer Hitch #C13388 that fit your 2019 Mercedes-Benz Sprinter 2500 with a 170 inch wheelbase and standard bumper. The reason for…
view full answer...