Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you're ready to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 8' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 8' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...D-rings snap down when not in use so they're out of sight and out of the way Just pull them up and lock them into place when you're ready to haul Surface-mount housing provides from-the-facto...
Installation Notes:
This kit is intended for vehicles with a 8' bed
Stake pockets are hidden or obstructed by the plastic rail caps, and require trimming of the plastic for the anchor points to be properly installed. This router bit BU69FR and this saw bit BU79FR are designed specifically for this vehicle (sold separately).
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 6-1/2' bed
More Information >Truck Bed Tie Downs Specs:
Features:
...span>BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the side wall pockets, and tighten them down with a Phillips head screwdriver....
Installation Notes:
This kit is intended for vehicles with a 8' bed
More Information >Videos
for Car Organizer
Help Articles
for Car Organizer
Expert Answers
for Car Organizer
Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic…
view full answer...Hey Matt, so the etrailer enclosed carrier part #e54VV does tilt back with the hinge that is built into the shank of the carrier. Jeep Wranglers have rear doors that swing out so I would not anticipate this being able to tilt enough to fully allow…
view full answer...Hi Jon; the actual width of the #IN94MR cargo box is 63-1/2". The full outside dimensions are 63-1/2" long x 28" wide x 15-3/4" tall and the inside dimensions are…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…
view full answer...Hi Dan; we do have a chrome cover for 5 on 5 bolt patterns. You can use the Phoenix USA QuickTrim Hub Cover #PXQT550CH4.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Thanks for reaching out, Brian! I do have a few solutions for you to get your license plate more visible while using your Kuat Sherpa 2.0 bike rack. For your application I recommend checking out the Yakima PlateMate #Y02713 and the Thule License…
view full answer...Hey Cameron, I was finally able to get my hands on the Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and found the spacing to be 1-7/8".
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails #RTT-82381 on the Cover #RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac #A54KG would be an option as this…
view full answer...Filter Products (36)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD