bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Padlocks


  • Replacement Keys for Master Lock Padlock Keys A1397, 0579, and 10L759
  • We certainly have replacement keys for your Master Lock padlocks! For your A1397 key, you will want to use part number # MLK1 and type in A1397 in the box. For 0579, you will also want to use # MLK1 and type 0579 in the box. For key 10L759, you will want to use # MLK27 and type 10L759 in the box.
    view full answer...

  • Replacement Key for Master Lock Laminated Steel Padlock # ML1KA
  • I went out to the warehouse and looked at some of our Master Lock Laminated Steel Padlocks # ML1KA which look like the one in your picture. None of them had a lock number stamped on them like the one in your picture does. If you are needing a key for a Padlock # ML1KA you will need go to with part # MLK1. When ordering a replacement key with part # MLK1 you will want to type the number on your key into the "Key Number" section. You will want to type in the number that is found on the key,...
    view full answer...

  • Hitch Pin Replacement For Roadmaster BlackHawk 2 Tow Bar
  • If you are just seeking a hitch pin for the Roadmaster Blackhawk 2 tow bar, then you will simply use a standard 2 inch receiver hitch pin like # 37201074. If you want a locking hitch pin, then I recommend the Flint Hill Goods Padlock Style Hitch Receiver Lock # FHG63VR. You may want to consider the Roadmaster Lock Set - Hitch Lock and 2 Quick-Disconnect Padlocks # RM-304.
    view full answer...

  • Spare Tire/Wheel Combo and Tire Carrier for 2005 Load Rite PWC Trailer w/ 205/65-10 Tires
  • Since you'll be dealing with a marine environment, I'd recommend using a galvanized wheel. I'm assuming your existing wheels have a 5 on 4-1/2 inch bolt pattern. If a load range C tire (1100 lb capacity per tire) capacity is sufficient, the # AM3H400 wheel/tire combo would be work well for you. If you need a heavier weight rating, go with # AM3H440 which is a D rated tire with a 1330 lb per tire rating. For a spare tire carrier, I'd recommend the CE Smith # CE22011Z and the padlock...
    view full answer...

  • Replacement Key For a Single Post MasterLock Padlock
  • We do have the Replacement Key # MLK1 for MasterLock locks. You will need to know the number for the key that fits your lock when placing your order. The Master Lock Trigger Style Coupler Lock # 605DAT is our closest style MasterLock to the single post you have.
    view full answer...

  • Cargo Trailer Side Door Locking Hasp
  • You need a sliding bolt door latch with lock. We do not have that exact item. the closest thing we can offer is the JR Products # 37220645 Door Bolt,but this does not have a locking mechanism, so you would have to additionally install a hasp like the Paneloc # H135-203E stainless steel hasp.
    view full answer...

  • How to Lock Thule Adventurer Cargo Box With Missing Lock Barrels
  • Although you have the lock core, you are missing the lock cylinder or barrel assembly it would install into. Unfortunately, Thule doesn't offer this as a replacement part. To be honest, your best bet would be to get a couple of lock hasps like # ML702D and padlocks like # 141T.
    view full answer...

  • Replacement Hasp for Broken Lock on SportRack Vista XL Rooftop Cargo Box
  • Regarding your SportRack Vista XL # SR7018 roof top cargo box. On further correspondence we discussed that not only do you need a key and lock cylinder core, but you also need the housing and latch parts. I spoke with the manufacturer and they only have replacement parts for keys and lock cores, but NOT the remaining mechanism. The remaining solution would be a hasp lock using the Paneloc # H125-203E hasp with the Paneloc # H110-204U Staple, and a Master Lock # 131D padlock.
    view full answer...

  • Recommendation For Replacement Lock For SportRack AERO XL Roof Cargo Box
  • I did some research and Unfortunately there is no replacement lock available for you SportRack Aero XL cargo box. If you are interested in fashioning a replacement option then you could use a silicone caulk like Item # LT37467 to seal up your lock holes and then drill new holes for a new lock. You could install a simple single-hinged Master lock like Item # 720DPF and then use a padlock like Item # 131D to keep it secure. I have attached a video for you to check out. Contact us...
    view full answer...

  • Replacement Key for Master Lock Hitch Receiver and Coupler Lock Set
  • The Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches # 2848DAT has replacement keys if you know the key number using # MLK1. If you do not know your key number, unfortunately there is no way to determine the replacement key needed. You can either drill out your locks to remove them and then replace your locks or you can have a local locksmith help you with forming a new key from your lock cylinder.
    view full answer...

  • Replacement Lock for a Thule Mountaineer 669ES Cargo Box
  • Is the actual lock housing missing or just the lock core that fits in it? Because if it is the housing then that part is not available as a replacement part. But if it is just the lock core then you can get # TH450200 which comes with 2 lock cores, 2 keys, and the universal change key to install the lock core. If you are missing the lock housing then what you could do is drill a hole through upper and lower halves of the box near where the regular lock would be and use a padlock such as...
    view full answer...

  • Replacement Lock for Sears Sport 20-SV Rooftop Cargo Box
  • Since you mention you do not have the hook type lock like # SR03807 then this is likely to be the part you need. According to my contact at Thule, who made the SV cargo boxes for Sears, the complete replacement lock assembly like yours is not available as a replacement part. You may be best served by installing an exterior lock mechanism such as a hasp like # ML702D along with a padlock like # ML40D. You'll need to drill holes and install the supplied hasp hardware to mount it.
    view full answer...

  • Replacement Lock Assembly for SportRack Aero XL Rooftop Cargo Box
  • Thank you for providing a photo of your SportRack Aero XL cargo box for which you are looking for a complete replacement lock assembly. I shared the photo with my contact at Thule (parent company of SportRack) and unfortunately they do not have a replacement lock. The original mechanism was, according to my contact, riveted in place and there is no user-replaceable part. However, you can still add a lock to the box with a little bit of creative modification. You will need to drill new...
    view full answer...

  • Replacement Cable for Swagman Anti-Rattle Hitch Lock and Cable for Bike Racks
  • The Swagman Anti-Rattle Hitch Lock and Cable for Bike Racks, part # S64030, includes a special washer that fits into one of the loops on the ends of the cable. This washer prevents that end of the cable from being slipped over the lock mechanism. We do offer other stand-alone lock cables that are generally similar, such as the RockyMounts Steelbraid Cable # RKY3854, but they do not have the washer in place on the loop. Without this special washer in place it might be possible to remove...
    view full answer...

  • Replacement Lock for Older Thule Rooftop Cargo Box
  • Your pre-owned Thule rooftop cargo box is quite a few years old indeed! My contact at Thule noted this one was actually produced in Sweden, before Thule moved cargo box manufacturing to the USA. Often older boxes may need to use alternate parts for locks, hinges etc when the original items are no longer available. Your photo does not show the lock itself, but if it is a round metal core with a letter and several numbers after it, like # THLOCKN028, we may have a replacement lock core;...
    view full answer...

  • Replacement Cargo Door Latches for 1994 Wells Cargo Trailer
  • Trailer makers do not maintain record of smaller items like the specific latches they install on compartment doors but many of these OEM products come from one of a few major suppliers like Polar and Lippert Components who produces most trailer frames made in the U.S. Since your photo did not come through to us you can send them to me via reply email along with dimensions and I will try to identify a replacement. Or you can review the linked pages which display our range of trailer and...
    view full answer...