For your application I recommend swapping out the ball mount platform that came with the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH64GR for your 2018 Mercedes-Benz GLC300 for the Ball Mount # 391BMU3S which is 5" shorter than the one that you currently have and puts you within 1" of being level which is acceptable.
You can either swap out your current hitch ball or use the Curt # 40038 so you can change out your ball mounts for different trailers without reinstalling... view full answer...
If you have a single speed, Bulldog jack rated for 12,000 pounds, like # BD182815, and/or powered drive kit, # BD1824200100, then this is the correct motor. The motor by itself does not include anything else like gears. For that you would need the complete powered drive kit, # BD1824200100.
If you have a 2-speed jack, the correct powered drive kit is # BD1824180100. The 2 speed motor and single speed motor are not identical so you would need to select the correct one based on your Bulldog jack. view full answer...
Thanks for reaching out and providing your photos!
The only threaded hitch pin that Thule has to offer comes in the Lock Kit # THSTL2 which has a bolt that measures 4-1/2" long and has a 12mm thread pitch. You'll want to double check that the threaded part fits your bike rack. view full answer...
I spoke with Lippert Components and was able to cross reference the part numbers you provided to the Lippert PowerGear Slide-Out Motor with Pin Connection and Coupler with Connector # LC29AF. To order this part you'll need to call our customer service department at 1-800-940-8924. view full answer...
I spoke with a representative from Yakima. They said the Replacement Spine and Rear Wheel Tray for Yakima HoldUp EVO Bike Carrier, part # 8880828, will fit your non EVO Yakima HoldUp 2. view full answer...
The Replacement Screen Frame # BVC0573-32 is designed to work with the Ventline Roof Vent model # V2119-601-00. It will work with any of the V2119 model vents. It sounds like you may have a different model of vent fan since it is not fitting correctly. If you are able to provide the model number of your current vent, we can recommend a suitable replacement. view full answer...
Since there is not an adapter, you are going to need to replace your fan motor when you go to replace the blade with # BVD0217-00.
The correct replacement motor that works with your Ventline VP-543 as well as the new fan blade is the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00. view full answer...
For a 7-way adapter designed for German vehicles towing LED lighted trailer to prevent the bulb out error message we have the part # C57003.
For an adapter that plugs into a 7-way and then provides a 4-way we have the part # C35FR. view full answer...
Yes, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Exhaust Only Fan # MA39FR is the correct replacement circuit board for your 8501 model. view full answer...
While we do not have an exact replacement for the Winnebago tail light 152070-01-000 you may be able to fit the Fusion LED Hardwired Trailer Light # OPT74NR. This is a 4" round light with the similar red an white lens allowing it to act as a tail light, brake light and reverse light similar to your current light. As I see your light fits into a recess you will need to check the dimensions to determine if this light will fit in the opening. If it does not fit please let me know the measurement... view full answer...
The Prodigy P3 part # 90195 is basically the nicest brake controller around so I would recommend you go with it on your 2014 Mercedes Sprinter as well.
Under the seat of your 20154 Mercedes Sprinter there should be a harness with a green connector. That will be the brake controller harness. We don't have an adapter that plugs right in but you can cut the connector off and hardwire directly to the wires. We have some info on the wiring colors of your vehicle but I would recommend you test... view full answer...
We have some suspension enhancements for your motorhome but aside from these parts we don't have any OEM suspension replacement parts so you'll need to reach out to your local RV or vehicle dealer for those parts.
To add some suspension enhancements to your 2016 Winnebago ERA 170 A I recommend the following:
SumoSprings Solo Custom Helper Springs - # SSR-338-54
Roadmaster Rear Anti-Sway Bar - # RM-1209-131
The SumoSprings will help your OEM suspension with up to 1,400 lbs of weight... view full answer...
There are two different spacer blocks that come with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75774, per the instructions they are 5/8” X 1-1/2” X 2” and 1/4” X 1-1/2” X 2”. That said, they do not specificy a thickness although we do offer these plates but you would have to purchase a hardware kit which has them, the Replacement Hardware Kit for Trailer Hitches part # RHK. view full answer...
It does not look like you will be able to use the Tekonsha Prodigy P3 Brake Controller # 90195 with your US Gear tow brake.
I recommend changing over to the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251. This system provides proportional braking to your 2005 Jeep. It is one of the few systems that looks for 2 inputs to confirm that you are braking. It wants to see that your brake lights are activated saying that you have physically pushed the brake pedal and it wants... view full answer...
The Replacement Brake Adjuster Kit for Dexter 12-1/4" Forward Self-Adjusting Brakes # K71-472-00 is definitely designed for hydraulic brakes. It can be easy to assume that hydraulic brakes mean disc brakes, in which case they would be correct. This part, however, is for hydraulic drum brakes.
Although this is slightly different, the brake adjuster for hydraulic drum brakes is located on the assembly at the bottom just like an electric brake assembly. This can be seen on the Dexter Hydraulic... view full answer...
I can definitely confirm the correct replacement straps, anti-sway attachment and lock/key for your Thule Archway XT 3-Bike Rack 9010XT; you had the strap right, but do need a different anti-sway attachment. I verified these are the correct parts for you with the manufacturer:
- Replacement Strap # 852-3006-001
- Replacement Anti-Sway Attachment # 852-3037-001
- Thule One-Key System Lock Cylinders # TH450200
I have added links to video reviews for you to check out as well. view full answer...
If you're referring to the small retention clips that I have pictured below then we do carry them, but only as a package with the roller assembly under part # GMNR925. view full answer...
The Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic # BVD0449-A03 and white # BVD0449-A01 are standard 14 x 14 covers but they will not fit your hinge. Your older style # BV0554-01 requires the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke # BV0554-03 to give you the smoke replacement you are seeking. view full answer...
I'll start out by saying that based off the board you've mentioned it looks like you've got a MaxxFan Plus model 4700. The lift lid not opening on your MaxxFan is usually down to a bad board, and if the unit is beeping at you when you try to operate different functions, it's usually a sign that the board is bad. With that said, I would recommend testing the input/output voltage on the fan to see if it's operating correctly. If the fan operates normally, but the lid just won't open it's... view full answer...