In order to determine the correct replacement hubs for your 2004 Four Winns Trailer you will need to pull one of the assemblies. Once you have the hub removed take out the inner and outer bearings and look for a number that should be stamped right inside of each of them.
If you can't read the numbers you can also take a few measurements along the spindle with a digital caliper. I have attached an image to assist.
If you can tell me the numbers you found, or the measurements you took,... view full answer...
Glad you're happy with the rack, and we can help you out here as we do have the correct replacement for your Inno T277 key; what you need is the following:
- Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes - Key T277 # IN38VR view full answer...
The Replacement Aero Bar Clip for Thule AirScreen Fairings # 8528583001 is a replacement for the TH8700, TH8701, TH8702, and the TH8703 Thule Fairings.
However since you mentioned you have the Thule Fairing for Roof Racks # TH871XT which is no longer available, this clip won't work for you, as there are no replacements available, but I do have another solution.
A new wind fairing, like the Thule Airscreen XT, will be your best bet, and will work great for you, and is compatible with the... view full answer...
To replace the mounting hardware for the etrailer Trailer Hitch Receiver # e22TR you need the Kit # RHK. Just input the hitch information prior to ordering and we'll send out the parts needed to get this installed on your 2015 Lexus RX 450h! view full answer...
We sure do!
You will need the Replacement Hardware Kit # RHK. When on the product page of the # RHK you will need to select Curt from the drop down menu, and for the hitch item number you will enter 13272.
The Curt Trailer Hitch Receiver # C13272 you mentioned is confirmed to fit the 2016-2019 Lexus RX 350 so as long as the vehicle you are installing the hitch on is one of those model years you will have no issues.
I included videos of the products mentioned for you to take a look at. view full answer...
The Draw-Tite Class III hitch you'd looked at, part # 75676 uses 6 M12 x 1.25 x 40mm (12 mm diameter with a 1.25 thread pitch x 40 mm long) class 10.9 bolts to secure the hitch to the nuts that are welded into the frame of your Lexus RX350.
We offer a replacement hardware kit as part # RHK. On the product page, you'd input '75676' as the hitch item number and choose 'Draw-Tite' from the drop down menu. This will provide all the hardware that originally came with the hitch.
I've linked... view full answer...
Actually we do list the Curt trailer wiring part # C56268 as a confirmed fit for the 2018 Lexus NX 300 now. You may have bought this before the fit was updated but currently we have this as a fit for the 2018 model. view full answer...
Yakima is slowly phasing out the Mighty Mounts, and moving to have all MightyMounts use the Universal adapter, part # Y03590 instead. This will connect to your Yakima HighRoller's existing mounting points and let you comfortably attach to your 2006 Lexus RX 400h's factory crossbars. view full answer...
For the old Karrite Voyager cargo box you would use replacement latch # 03347. The replacement locks and keys, # SR03807, should also be the correct fit for the box.
For the hinges, replacement parts are not available. If they are not moving freely then you may need to remove the hinges, inspect them for damage or to see if they are bent, give them a good cleaning, dry them completely, then use a house hold lubricant to assist in movement.
Cargo box lids can kind of stick a bit even when... view full answer...
If you want just a replacement anti-rattle bolt without a lock, then part # P5902 is the correct part for your Swagman XC 2 # S64650. If you are looking for an anti-rattle hitch pin that includes a lock, then # S64029 is the appropriate part. Note that this bolt is only compatible with the Swagman bike racks that have 1-1/4" or 1-1/4" AND 2" shanks, just like the Swagman XC 2.
If you want to cable lock while you are getting your hitch pin lock so that they are keyed alike, we also have... view full answer...
We do have installation hardware for the Curt # 13445. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. Make sure you enter 13445 into the "Hitch Item Number" field before you add to cart. view full answer...
If there is any doubt at all, I would replace any worn parts. With a tow bar that has seen as much action as your Falcon II, # RM-520, it would be a good idea to give it some replacement parts so it will continue to serve you well.
In the realm of Falcon series tow bar replacement parts, we have the RoadMaster Autowlok Repair Kit for Falcon Tow Bars, # RM-910003-50. I have included a link to the installation details for reference. We also have the RoadMaster Replacement Button and Glue... view full answer...
Demco's warranty states "Your Demco Kar Kaddy is warranted to be free from defects in materials and workmanship under normal use and service for a period of one year after date of purchase by the original (first) retail owner, or until it is resold or transferred by the original owner. Hubs used on the KK370SB are warranted for a period of three years after the date of purchase by the original (first) retail owner or until it’s resold or transferred by the original owner. Tires and lights... view full answer...
Those parts are only available with the Fit Kit # INTR152 for your 2022 Lexus GX 460. These will attach to your Feet # INXS350 and Crossbars # INXB138-145. view full answer...
Ordering etrailer # RHK replacement hardware for any hitch we sell is easy. Follow the link for Replacement Hardware and enter the Item/Model number, and the Manufacturer Name then click Add To Cart. view full answer...
The bolts for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75685 are M12 x 1.25 x 25 mm Grade 8. The washers are 1/2 inch. If you want the replacement hardware kit, we can send you the actual parts # RHK or you can get what you need at the local hardware store. view full answer...
For carrying a bike rack with a trailer hitch a draw bar/ball mount would not be needed. So for your 2002 Lexus EX 300 the Draw Tite hitch part # 36336 would be all that you need aside from the bike rack.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video... view full answer...
We can definitely help you out with replacement hardware for your Curt Trailer Hitch Receiver # C11362, Mike!
The part you're looking for is found as # RHK on our site. You just need to type in "C11362" into the hitch number Hitch Item Number box and we'll send you the correct hardware to get your hitch installed again.
Hitch hardware is only meant to be installed once so it's a good thing you're wanting/needing to get replacement hardware anyways. view full answer...
The TruRyde double lip grease seal set you referenced, part # RG06-050, is indeed the correct grease seal for use on a number 84 spindle with inner bearing # L68149 and outer bearing # L44649. The reference numbers you gave are the seal part numbers from other makers: number 568886 is the AL-KO part and number 09103305 is the Hayes part.
We also offer a complete bearing kit for the number 84 spindle that includes the bearings, races, seal, tang washer and cotter pin, part # BK2-100.
The... view full answer...
The replacement anti-sway cradle for the Thule Raceway PRO # TH9002PRO that you referenced can be found on our site listed as part # TH8523486001.
The straps that secure the bike to the cradles and anti-sway cradles are sold individually with part # 852-3006-001 or as a set of 4 straps with part # TH534. view full answer...
Go To Results