bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Honda Pilot


  • What is Replacement Quick Disconnect Bar Assembly for Roadmaster Base Plate # 1544-1
  • Roadmaster part # 910021-00 is the Quick Disconnect Tow Bar Base Assembly for all Roadmaster tow bars (except the Tracker # RM-020). This part includes the support bar, quick disconnects (both motor home and car sides) and the pins to attach the tow bar to the support bar. If you do not need the quick disconnects and pins, you can instead use part # RM-067.
    view full answer...

  • Air Tubing to Replace Damaged Air Line For Firestone Air Suspension Installed on 2005 Honda Pilot
  • Firestone does indeed offer replacement 1/4 inch air line. The length offered is 30 feet, part # F9416. When inserting the air line into the fittings, having a perfectly squared cut is crucial to avoid leakage. We recommend using a tubing cutter like part # AL10530.
    view full answer...

  • 7 Way Trailer Connector For 2012 Honda Pilot With Tow Package
  • The T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118265 is a kit that installs a 7 way trailer plug-in on your 2012 Honda Pilot with factory tow package. This includes the 7 way plug with harness which plugs into the factory connection under the rear bumper of your vehicle, and includes the converter box with harness which will plug into the factory connection in the rear cargo area of your vehicle. These harnesses are not sold separately. If you just...
    view full answer...

  • Replacement Hardware for Draw-Tite Max-Frame Trailer Hitch Receiver on 2022 Honda Pilot
  • You can get replacement hardware for the Draw-Tite # 75225 using the Replacement Hardware Kit for Trailer Hitches # RHK. Make sure to enter 75225 under "Hitch Item Number" before you add to cart. I have attached an installation video below for your reference.
    view full answer...

  • How to Find Replacement Hubs for PWC Trailer
  • Spindle measurements need to be taken to the thousandth of an inch so you would have to use dial or digital calipers to take the measurements since there are no bearing numbers on the bearings. I have included a picture that shows the measurements needed. We have one seal that has a 1 inch inner diameter, # CE16305A, but it is designed to fit a 3/4 inch spindle, not a 1 inch. Measurements are going to be key here. It is possible that we will not have hubs, bearings, and seals and if that...
    view full answer...

  • Replacement Vent Cover with Track on Side for Raising or Lowering Lid
  • I believe the vent cover you are looking for is the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted # FVK1020-19. I've attached a video to assist. I've also attached the 4 hinge options in a photo to give you a clear look at the options.
    view full answer...

  • Availability Of Replacement Parts For Tekonsha T-One Vehicle Wiring Harness 118558
  • I have a replacement option for you, but after speaking to my contact at Tekonsha I confirmed unfortunately you can not buy any of the parts of the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package # 118558 for your 2013 Honda Pilot separately. Instead the only option to replace the wiring parts you are missing, is to purchase a new complete harness using # 118558.
    view full answer...

  • Fuse Types and Amperage Values for Curt T-Connector Vehicle Wiring Harness C56291
  • Curt T-Connector Vehicle Wiring Harness # C56291 includes both a red 10-amp mini blade fuse for the red fuse holder on the harness and a pink 30-amp box fuse for the fuse box in the engine compartment. Both fuses are shown in the linked photo. You'll have no trouble finding these at your local auto parts store.
    view full answer...

  • Replacement 7-Way Trailer Connector for a 2012 Honda Pilot
  • If all you need is the 7-Way socket and your 2012 Honda Pilot already has everything else you see in the # 118265 kit, then you can use # PK11893 and it will just plug in. But if you need the wiring that plugs into the back of the 7-Way as well then you will have to get the entire 118265 kit because that cable by itself is not available as a separate part.
    view full answer...

  • Adding Trailer Wiring to a 2012 Honda Pilot
  • So it sounds like your 2012 Honda Pilot did not come with the factory tow package. You are going to need more than just the converter box. You are also going to need some relays and at least one fuse. Since the converter is not available by itself you would have to get the complete kit, # 118265, or # 118558. I wish we did just have the converter by itself but at this time it is not for sale as a separate part.
    view full answer...

  • Replacement Rubber Cradle Straps for Older Thule Bike Rack
  • We do carry replacement rubber cradle straps for the many bike rack brands we carry, including Thule. Do note that sometimes the original design strap will have been replaced with a new version, that while still compatible, may appear different. Since your rack is an older model this may be the case. The linked page will display all of the replacement rubber strap items we offer for brands like Thule, Yakima, Swagman and others. If you click on Thule you'll see all of their replacement...
    view full answer...

  • Replacement Hardware for Curt Trailer Hitch C13146 on 2017 Honda Pilot
  • I'm sorry to hear your vacation was cancelled but we do offer complete replacement hardware for the Curt Trailer Hitch Receiver # C13146 that fits your 2017 Honda Pilot. To get the hardware, which includes the washers and M14-1.50 bolts, what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK. All you need to do is click # RHK, enter "C13146" in the "Hitch Item Number" box, and select "Curt" from the drop-down menu and you'll get the complete hardware needed for the...
    view full answer...

  • Threaded Hitch Pin and Lock for a Thule T2 Trailer Hitch Mount Bike Rack
  • Your Thule T2 should have come with a Snug-Tite lock, # THSTL2. If it is missing or damaged you can use the THSTL2 to replace it. Or if you are missing the pin it is # 853-5917. And for just the lock housing it is # 753-3725-02. You would need to add lock cores to the housing using # TH450200. We can also get replacement keys if the key and lock number starts with an N or an E.
    view full answer...

  • Recommended Replacement For Shorted Out Taillight Converter on 2017 Honda Pilot
  • Typically, when a converter box lets loose, it's caused by a short circuit in the trailer wiring. A nicked wire or loose connection or maybe even a rusty bulb socket causes a short circuit which causes a spike to feed back into the converter which destroys it. All it takes is one hard to see nick in the wire insulation that's not easily seen. Although this isn't a great occurrence and is certainly a nuisance, the good news is that the converter did its job and prevented feedback into...
    view full answer...

  • Replacement Step Pads for Westin E-Series Nerf Bars
  • The replacement step pad you need for your Westin E-Series Nerf Bars # 23-2250 is # 23-0001. I've linked a video on how to install the replacement step pads.
    view full answer...

  • Replacement Fender Skirt for 2018 nuCamp T@b 320S
  • We do have a handful of replacement fender skirts that I've linked for you to filter through. These aren't fitguided so I don't know what exactly will fit your 2018 nuCamp T@b 320S, but something like the 58" long x 2-1/4" wide Phoenix USA Flexy Flares # PX52-170 should work just fine. I recommend measuring the length of your current fenders along the inside of the wheel well to make sure you choose something with the correct length.
    view full answer...

  • 4-Way Trailer Wiring Recommendation for 2015 Hond Pilot LX
  • For a 4-way trailer wiring kit confirmed as a fit for your 2015 Honda Pilot we have the Tekonsha kit part # 118558 which would be exactly what you need. This is a custom install kit that plugs into your vehicle's exsiting wiring to provide you with a 4-way.
    view full answer...

  • Thule Rack Replacement Key or Lock Cores With Key
  • The Thule locks without the number printed on the face of the lock are not able to be replaced without knowing the key number. The new locks have the number printed on the key only so it is recommended to write the number down and keep it somewhere safe. Unfortunately that doesn't help you, so you will need to carefully drill out the cores and replace them with the Thule One-Key System Lock Cylinders - Qty 4 # TH450400.
    view full answer...

  • Is a Transmission Cooler Needed to Tow Trailers with 2007 Honda Pilot
  • An aftermarket transmission cooler is not required for you to tow a trailer with your Honda Pilot. However, it may be a good idea and it will certainly help to extend the life of your transmission, especially if you plan on towing often with your Pilot. The majority of transmission failures are a direct result of overheating and most factory cooling systems are at best adequate, and not necessarily designed to keep fluid at the appropriate temperature during towing conditions. While there...
    view full answer...

  • Replacement Mounting Bolts for Reese Dual-Cam Sway Control
  • It sounds like you need the thread forming screws that attach the dual-cam sway control brackets to the trailer frame. Is this is correct then you will need set # 58437 for 8 or # 58459 for 2. You may also need the rivet nuts, # RP58507, for a set of 4. If you need a different part then I have linked the dual-cam instructions # RP26002 that shows the parts list on the first page.
    view full answer...