The correct replacement for your missing 2802 key would be part # THKEYN2802 from Thule. You can order the replacement key by using the provided link. view full answer...
The Curt Trailer Hitch Receiver # C12031 for 1999 thru 2017 Honda Odyssey models use M12-1.25 x 35mm bolts with 1/2 inch conical toothed washer for the weldnuts in the frame. It also will use one 7/16-14 x 1-1/2 inch carriage bolt with a square hole spacer and a 7/16-14 flange nut. I've attached the installation instructions to assist further.
If you want the exact hardware and fish wire you can use kit # RHK. You may also want the nylon tube brush # 814092 and some spray lubricant... view full answer...
Since your axle capacity is unknown - and since it is also rust damaged - you're probably on the right track in thinking of replacing it. We offer both axle beams by themselves and in kits that also include hubs, bearings, races etc. Please see the linked page.
We also offer axle-less suspension systems from Timbren, such as their 3500-lb-rated # ASR3500S05. These unique systems mount directly to your trailer frame - no axle needed - and they can save you lots of install time, potentially... view full answer...
We do have replacement hardware for trailer hitch receivers that fit your 2019 Honda Odyssey, but you do have to know what part number your hitch is. What you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter the part number of your hitch in the "Hitch Item Number" box and you're set. view full answer...
Since you lost the keys to your locks on a Yakima bike rack like the FullTilt and don't know the key number, what you will actually need to do is replace the lock cores.
So long as your rack is currently unlocked, you can simply swap out your rack's lock cores with the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202.
If they are locked you'll need to have a locksmith drill them out. I have added a link to a video review for you to check out as well. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75270 which is a fit for a 2014 Honda Odyssey uses a square hole spacer which although we do not have the exact same one available as a replacement, we do offer the Replacement Spacer Block part # 01077-011 which should work. view full answer...
The Curt # C12031 uses M12 x 1.25" bolts. You can get an entire hardware kit for your Curt hitch by using the part # RHK and putting the "C12031" in the field marked "Hitch Item Number" on that product page. This will get you all of the hardware needed to install this particular Curt hitch, including the fishwire. view full answer...
The Auto Body Clips and Fasteners for Honda Vehicles # PT55FR contains multiple retainers for Honda vehicles. This will allow you to use clips inside this kit to replace the ones on your WeatherTech Easy-On Stone and Bug Shield Deflector # WT50208 for your 2013 Honda Odyssey. We do not currently carry just the clips for the guard separately at this time. view full answer...
In order to get replacement hardware for a trailer hitch you can use the Replacement Hardware Kit for Trailer Hitches part # RHK. In order to make sure you get the correct kit for a 2010 Honda Odyssey with U-Hual 1-1/4" you will enter "Curt" in the manufacturer drop down and enter "C12031" for hitch item number. U-Hual uses Curt hitches. view full answer...
We do have trailer hitch hardware for your Curt # C13068 trailer hitch receiver. The Replacement Hardware Kit for Trailer Hitches # RHK is what you need. You will need to enter the hitch item number you listed and then select Curt from the manufacturer drop box. We will create a kit for you of all the hardware needed.
I've attached a video of the installation to further assist. view full answer...
E-bikes are a bit heavier than standard bikes, and since the E-Bike racks we carry are only designed for 2 inch hitches you would want to go with a 2 inch hitch like the Draw Tite Class III part # 75270 which is a confirmed fit for your 2009 Honda Odyssey. I attached an install video for this hitch for you to check out as well.
For a bike rack the most popular option we have is the Hollywood Racks SE part # HLY84FR which is designed for the higher weights of E-bikes like what you have.... view full answer...
Yes, you can get the anti-sway cage for your Thule Passage trunk mount bike rack # TH910XT. The part you need is # 853-7758 and it fits the Stay-Put cradles on your Passage bike rack. The strap is sold separately, # 852-3006-001. view full answer...
First thing you will need is a ball mount. But you need to pick one out that will allow you to tow your trailer level. In order to do that you have to find out which rise/drop you need. You will need to measure from the bottom of the coupler to the ground when it is sitting level and then you will need to measure from the top of the hitch opening to the ground. Whatever the distance is will be the amount of rise/drop you need. With that dimension you will be able to check out the link I... view full answer...
We do offer replacement installation kits! You will want to go to part # RHK, enter your Hidden Hitch's part # 87479, and then select "Hidden Hitch" from the drop down list of manufacturers. view full answer...
To choose the correct trailer axle for your application you will first need to measure the Hub-Face (A in picture) and Spring-Center (B in picture) measurements on your current axle(s).
Since 800 kg converts to about 1,764 lbs I recommend looking at axles with a 2,000 lb capacity to be on the safe side of things. I have linked our selection of 2,000 lb axles for you to filter through.
If we do not have any axles with the same Hub-Face and Spring-Center measurements that you have then... view full answer...
Did you purchase the etrailer.com hitch, part # E98862, you referenced? Whichever hitch you have, use part # RHK and select the hitch manufacturer from the drop down menu and type the model number into the box. That will order the exact hardware kit that was originally included with the hitch you have.
I've attached a link to all of our current hitches that fit your 2007 Honda Odyssey for you. If you don't know the model number of the hitch you have this may help. If it doesn't let... view full answer...
I found your order from back in 2014 for the Curt Class II hitch # C12031 and I am pleased to tell you it will fit just fine on your new 2017 Odyssey.
You will need a new hardware kit since hitch installation hardware is intended for a single use only. We offer part # RHK. All you need to do is enter that part in our search field and press enter. Then once on the page simply enter the hitch part number (C12031) and select the brand Curt from the menu tool provided.
We will put together... view full answer...
We do have the replacement hardware for the Curt # C13068. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. This kit comes with everything you need to install the hitch on your 2004 Honda Odyssey. The price can be found on the product page.
I included an installation video below for your reference. view full answer...
I wish I could help but Yakima does not offer any replacement lid supports for the Yakima SpaceBooster Cargo Box (1998-2003) anymore. I would only be able to recommend a full replacement like the Yakima SkyBox 12 Rooftop Cargo Box part # Y07334. The other option you have would be to try and retro fit a lid support from another cargo box like the Replacement Lid Support for Yakima Cargo Boxes part # 8880683 but we don't really have any advice for this. view full answer...
Yes, The Replacement Load Bar Endcap for Thule or Hullavator, Item # 853-2297, will work for your regular Thule Square Load Bars since the Thule Goalpost TH997 came with a Thule square crossbar.
As much as possible, Thule uses common parts and common sizes so that it is easier to find replacement parts for their products.
Contact us if you have other questions. view full answer...
Go To Results