I do have an option for you but the Kuat Beta Bike Rack for 2 Bikes part # B202-2 can't be used on a motorhome due to the rough ride. That said, the Thule Camber 2 Bike Rack part # TH9058 is a very similar rack and can be used on the back of a motorhome. It measures 5-3/4" from the center of the hitch pin hole to the closest part of the rack. view full answer...
I wish I could say yes but I checked with Roadmaster and they still do not list a stabilizer for your 2019 XC-S chassis. If your motorhome is a 2019 model though you might actually have a 2018 XC-S chassis so I would check to see if that is so. If you do have a 2018 the # RM-RBK18-RSSA would be a fit. view full answer...
Yes, I verified directly with Roadmaster that the Exact Center Steering Stabilizer # RM63RR you referenced will fit and work perfectly on your 2022 Winnebago Sunstar 29V Motorhome.
It will simply mount between the steering mechanism and chassis to create a tight connection for drastic reduction in wandering and quick corrections of oversteering to make your trips much more enjoyable. view full answer...
That's going to depend on the entry height and width of the cutout under the door of your 2018 Winnebago Micro Minnie 1808FBS, but based on the pictures I can find I kind of doubt anything more than a single step unit will work.
If you can send me the measurement from the top of the mounting cutout for the steps to the ground, and the width of that cutout I can check for you.
If you cannot fit another step then you'll just need to use a portable single step # SASXLA-09C-G which is adjustable... view full answer...
Sounds like you have a module issue. When the Coach Steps stop retracting and extending when they are supposed the solution is to replace the module. For that you'd need the part # LC301702. This is the brain of the system that tells the step motor when it's supposed to power in and power out the steps. view full answer...
The correct replacement control module for the 909506000 that you have is the Lippert Components Kwikee Control Unit for pre-IMGL/9510 Step Control # LC379606. view full answer...
The Thule Helium Pro 2 Bike Rack # TH9042PRO referenced in your question does feature a tilt-away design that allows most rear hatch doors to open without interference but with swing-away doors like what you have on the Travato RV it's unlikely you will be able to open them completely without removing the rack. This is going to be the case with any tilt-away bike rack.
The good news, as you alluded to in your question, is that when you do need to open the doors completely the extremely... view full answer...
The Jensen Stereo part # JWM60A will work great as a replacement for your AWM960 but the connectors are not the same and there isn't a plug and play adapter. You'd have to wire your RV's wiring to the new stereo using the diagram I attached as a guide. view full answer...
For your 2021 Winnebago Micro Minne 1800BH I recommend the Adco SFS AquaShed Cover for Travel Trailer - Up to 20' Long - Gray # 290-52240 which due to its Heavy-duty, 3-layer fabric protects that protects against rain, snow, and sun.
The side panels constructed of non-abrasive, triple-layer polypropylene that is breathable to prevent mold and mildew from forming, and the top is made of a triple-layer SFS AquaShed fabric that beads water to prevent it from pooling on your trailer, and protects... view full answer...
I looked up some pictures of your 2021 Winnebago Micro Minnie 1808 FBS and it has an Alumi-Tread pull out step so for a three step version you'd need the part # LC432696 and you'd be set. view full answer...
The Adco RV Cover for Winnebago Travato and Rialta Class B Motorhomes # 290-64867 was made specifically to fit your 2019 Winnebago Travato which means it will accomodate any antennas and roof top accessories without issue. You'd need to just be aware of the antenna and roof accessories when installing and removing the cover and you'd be fine! view full answer...
The Curt # C17499 TruTrack weight distribution system you'd looked at is designed for trailers with a fully loaded and ready to tow tongue weight ranging from 500-800 lbs, which is right around where your Micro Minnie would be.
In addition to the fully loaded tongue weight of the trailer, the weight of anything carried in the truck bed behind the rear axle should also be considered as tongue weight. Using a scale like the etrailer Tongue Weight Scale for Campers and Utility Trailers -... view full answer...
The TireMinder TPMS for Dual Axle Trailers part # TPMS-TRAILER as you stated is only for trailers 25' or shorter. The Winnebago Minnie 2500FL measures 28' 3" long so I cannot recommend this. There isn't another solar powered version like this for longer trailers either so you will have to consider other options like the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster part # TM89FR. The main difference is the monitor which will take up some space on your windshield and plugs into... view full answer...
For your 2017 Winnebago Vista 35LX built on a Ford F-53 chassis the correct air spring suspension kit would be the Air Lift part # AL57344. There is drilling required but there isn't a similar option that does not require drilling. view full answer...
Thank you for the picture and part number of your Kwikee steps. Since we know you have the Kwikee Series 25 steps the correct part you need is the part # LC369354. view full answer...
In order to confirm the correct replacement electric step assembly for an RV you'll need to know the step make, model number, and series. The most common are Kwikee Steps which are offered in 32 Series, 27 Series, etc. Once this is obtained, you can then choose the correct one using the list attached below. The width of the mounting bracket can also be used as a filter to narrow down options. The Kwikee Electric RV Step Complete Assembly part # LC372261 is our most popular replacement option. view full answer...
I would love to help but we cannot look up the correct replacement lid for a roof vent on any given trailer/motorhome since there is no database to reference. Therefore, the best option we can offer for replacement vent lids in which the model is not know is the MaxxAir UniMaxx Universal Replacement Lid part # MA00-335002 that fits all roof vent lids regardless of model. view full answer...
For your 2020 Winnebago Micro Minnie 1808 FBS, I recommend going with the Adco Olefin HD RV Cover # AD97ZR.
This cover will work with travel trailers that are up to 20' long, is made from triple layer polypropylene, has built in vents to help reduce the interior buildup of mold and mildew, and will work great for winters in Montana. view full answer...
Since you are going with a slightly bigger equalizer, the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K, part # LC279688, you will go with a smaller shackle strap. The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps, part # MR58ZR, is my recommendation. This change will minimally affect the height of your toy hauler, if they affect it at all.
I have included a product description link and video review links below. view full answer...
The Winnebago Micro Minnie 2108 DS measures 22'5" long so in order to find the correct storage cover we just need to subtract 3' for the tongue and round up. Therefore, we're looking at a cover for a 20' trailer and for this I recommend the Adco SFS AquaShed RV Cover for Travel Trailers up to 20' Long part # 290-52240 if you live in the north or the Adco Olefin HD RV Cover for Travel Trailers part # AD97ZR if you live in the north or south. These are both great options, the only difference... view full answer...
Go To Results