Replacement Roof Vent Lid for a Motorhome

Question

Question:

Hello i have a 2007 Winnebago View 23H Diesel and i lost the vent cover for the bathroom vent i need to replace. I just need the cover the vent works fine....Can you help me?

asked by: Michael

0

Expert Reply:

I would love to help but we cannot look up the correct replacement lid for a roof vent on any given trailer/motorhome since there is no database to reference. Therefore, the best option we can offer for replacement vent lids in which the model is not know is the MaxxAir UniMaxx Universal Replacement Lid part # MA00-335002 that fits all roof vent lids regardless of model.

expert reply by: Conner L

0

Answer 1

In order to find the exact replacement vent cover for a trailer, you'll need to know the model number of the vent which can be found under the screen and is really the only relevant information that can be used to determine this. That said,…

view full answer...

Answer 2

The vent cover for your 1971 Holiday Rambler I recommend is the Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White #CAM40153 based on your description. If that vent doesn't look like the correct hinge, then I…

view full answer...

Answer 3

In order to determine what replacement trim or vent cover you need, we definitely need to know the model number. This number is commonly found on a sticker either on the top of the vent or inside the housing when the vent is open. In order to…

view full answer...

Answer 4

The vent you have is a Ventline Northern Breeze, and the replacement lids have been discontinued for these vents. You do have an option if you like, which is to try a universal lid, the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 10

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 11

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...

Answer 12

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Replacement Roof Vent Lid for a Motorhome

Product Page this Question was Asked From

Continue Researching