Expert Answers about Nissan Rogue
- Malone Roof Rack Recommendation for 2018 Nissan Rogue with Raised Side Rails
- Malone does offer a roof rack similar to the one you referenced as a confirmed fit for your 2018 Nissan Rogue if it had side rails. The only way to get those rails added to your vehicle though would be through a Nissan dealer. For a rack to attach to the rails that you'd want the part # MPG216 for 58 inch crossbars or # MPG217 for 65 inch. The kit you mentioned is shorter at 50 inch and is not recommended. The install is pretty simple actually and I think you'd have no problem with it....
view full answer... - Recommended Suspension Enhancement for 2017 Toyota Tacoma 4x4 with 4 Leaf Springs
- For your 2017 Toyota Tacoma, the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-612-47 are my recommendation. This is a popular option and will give you support while fitting your 4 leaf springs. In my opinion these are better for both loaded and unloaded vehicles because they have more of the progressive load support.
If you prefer Timbren which are a little more stiff which is great for loaded beds but not as great when unloaded I recommend the Timbren Rear Suspension Enhancement...
view full answer... - Roof Rack Recommendation for 2018 Nissan Rogue with Naked Roof
- For your 2018 Nissan Rogue with a naked roof you'll need to install a roof rack so that you can mount the carrier/basket you have in mind. For that the Rhino Rack roof rack part numbers # RRVA126B-2, # RRRLKVA, and # DK396 is what you'd need.
What I really like about the Rhino Rack roof racks is that you get the higher quality of the more expensive racks but at a better price. The Rhino Rack roof basket part # RMCB02 is a really solid option for a basket as well.
view full answer... - Roof Rack for 2018 Nissan Rogue with Raised Rails for Thule Hullavator Kayak Carrier
- To fit two Thule Hullavator # TH898 kayak carriers on the roof of your 2018 Nissan Rogue you would need a roof rack with longer crossbars. For that the Malone Aero roof rack part # MPG216 is a confirmed fit for your raised roof rails and has 58 inch crossbars which would be your best option. It has the top channels on it too that the Hullavator is designed to attach to.
view full answer... - Roof Rack and Bike Rack Recommendation for a 2009 Nissan Rogue
- The Rola roof rack 59824 that you referenced has been confirmed as a fit for your 2009 Nissan Rogue. The Bike Carrier # RBC035 that you referenced has been confirmed as a fit for the Rola Sport Bars like the 59824 so it will work well.
view full answer... - Hitch for 2017 Nissan Rogue Allow Use of Hands Free Liftgate
- The Draw Tite hitch part # 75902 which is a fit for your 2017 Rogue will allow you to use the hands free lift gate. You will just need to kick to either side of the hitch opening.
view full answer... - Recommended Trailer Hitch for a 2019 Nissan Rogue and Thule Helium 3-Bike Rack
- I recommend using a Class III hitch over a Class II because the Class III options have a 2" receiver whch tend to have higher weight ratings, are a little beefier, and they are compatible with more accessories than 1-1/4" receivers are.
For your 2019 Nissan Rogue SL I recommend the etrailer Trailer Hitch # e98846 because it has a hidden crosstube and a matte black finish. This means that you'll have a great looking receiver that will match the trim on your vehicle plus the matte black...
view full answer... - Bike Rack Recommendation for 2016 Nissan Rogue with Spoiler
- I don't know which Thule rack you have, but for your 2016 Nissan Rogue with the spoiler Thule doesn't list any of their trunk racks as a confirmed fit so I wouldn't recommend you install the rack. I checked them all and the fit notes all say that if equipped with a spoiler it's listed as a "no fit".
I know you are leaving on your trip "today" so this may get to you too late, but your best option is a hitch bike rack. You would need a hitch installed like the Draw Tite part # 75902 which...
view full answer... - Recommended Trailer Hitch Receiver For 2012 Nissan Rogue Sport
- I reached out to my contact at Curt and the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13204 is a confirmed fit for your 2012 Nissan Rogue Sport. We don't have a confirmed fit for the Nissan Qashqai because it wasn't released in the US market. This hitch has a concealed cross tube and a square tube design that has a gloss black powder coat finish.
If you will be towing with this vehicle, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer...
view full answer... - Does Hands Free Liftgate of 2020 Nissan Rogue Still Function After Hitch Install
- Yes, the hands free lift gate of your 2020 Nissan Rogue will work after the install of the etrailer hitch part # e98846. You'll have to kick your foot to either side of the hitch opening is all. This is the case for most vehicles that have the hands free liftgate sensor.
If your plan was to do some towing the best trailer wiring option is the Tekonsha kit part # 118480 because it installs without requiring any hardwiring or splicing to the vehicle wiring and also comes with a very reliable...
view full answer... - Recommended Spare Tire Carrier and Trailer Box for Small Aluminum Trailer
- For your 2000 lb Silverwing trailer, I recommend the following accessories:
For your spare tire carrier, I recommend the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels # FSTC1000301.
For your trailer dolly, I recommend the Rack'Em Trailer Dolly # RA20. You will need to trade out the hitch ball for # 63845 to match your coupler.
For your toolbox, most pole tongue trailers would need to keep the box on the bed of the trailer. There are not tool boxes for trailers like...
view full answer... - Hitch for 2019 Nissan Rogue that Allows Use of Hands Free Liftgate
- The Curt hitch # C13204 that you referenced does not prevent you from being able to use the handsfree liftgate of your 2019 Nissan Rogue. You'd just need to kick your foot to either side of the hitch opening and the gate will open. I attached an install video for this hitch for you to check out as well.
If you were looking for trailer wiring too the very easy to install and reliable Tekonsha kit part # 118480 is the way to go as well!
view full answer... - Does the Tow Ready Wiring Harness # 118480 Have to Be Run to Vehicle Battery
- Powered trailer wiring harnesses like the Tow Ready part # 118480 that you referenced have to have the battery wire run all the way to the positive post of the vehicle battery. The reason for this is so that the taillights of the trailer won't be putting any amperage draw on the delicate taillight wiring of the vehicle. All of the amperage would be drawn from the battery instead. If you were to power the unit from a 12 volt source like what you mentioned you would be defeating the circuit...
view full answer... - Carrying Kayaks On A 2026 Nissan Rogue
- Anytime you add a roof rack or roof rack accessory to your vehicle, you reduce the weight that you can carry. The weight limit on your 2016 Nissan Rogue is 100lbs. This means the weight of your roof rack, roof rack accessories, and the items you are carrying on the roof, when totaled, cannot weigh more than 100lbs. You will not be able to carry two kayaks with a load assisted kayak carrier, just one. If you want to carry 2 kayaks you will have to get a hitch receiver installed and carry...
view full answer... - Trailer Hitch Fit Recommendation for 2015 Nissan Rogue Select S
- For your 2015 Nissan Rogue Select I recommend Draw-Tite trailer hitch # 75902. This is a Class III trailer hitch with a 2 inch receiver rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. I have linked a video showing an example installation of this hitch for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Wiring Harness Compatibility with 2019 Mexican Nissan X Trail Rogue Hybrid
- The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118480 has not been tested on any of the 2019 Mexican Nissan X Trail Rogue Hybrid models. It is unlikely that it would fit but it has not been tested to confirm.
The ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is the best option because it doesn't actually splice into any of your factory wiring so you wouldn't lose any function when it hasn't been tested...
view full answer... - Coupler Lock Recommendation that Can Be Keyed Alike and Can Fit All Ball Coupler Sizes
- The Fastway Universal Coupler Lock - Key 318 # FA86-0015-318 can fit 1-7/8", 2" and 2-5/16" couplers and all of this part number will have key number 318. This would be perfect for you. Check out the attached video for more information.
view full answer... - Recommendation for Transporting Schwinn Meridian Adult Trike with 2014 Nissan Rogue
- To transport your Schwinn Meridian Adult Trike with a trailer hitch on your 2014 Nissan Rogue, I highly recommend the Hollywood Racks Sport Rider Trike Carrier # HR1000Z-R-TRKADP. This hitch-mounted carrier is designed specifically for trikes like what you have. It features a 100 pound weight capacity and will work with trikes that have a maximum wheelbase of 74 inches and maximum track width of 36 inches. The precision-clamping, cushioned hooks slide along the mast for quick and easy loading/unloading,...
view full answer... - What Parts are Needed To Safely Transport 325lb Wheel Chair with 2019 Nissan Rogue SV AWD
- I do have a way for you to transport your 325lb wheel chair with your 2019 Nissan Rogue SV AWD, but you won't be able to use a cargo carrier because while the trailer hitch # e98846 for your vehicle has a 525lb capacity, your vehicle is only rated for 110lbs of tongue weight per Nissan.
To safely transport your wheel chair you'll need to use a trailer with the following components:
Wiring Harness # 118480
Ball Mount # 989900
While I know this isn't the news you wanted to hear, this is...
view full answer... - Bike Carrier that Will Fit a 2010 Chevy Malibu and 2014 Nissan Rogue
- I have a great solution that will fit both the 2010 Chevy Malibu and 2014 Nissan Rogue and you will not have to install trailer hitches on either vehicle. You can use the Hollywood Racks Over-the-Top rack # HRF2 for 2 bikes or # HRF2-3 for 3 bikes.
These racks have an additional upper arm piece that moves the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works.
If you...
view full answer...
Go To Results