I wish there was a way to upgrade your cover to have the slots needed for the Overhaul HD but the line of cover you have does not have this available.
It's probably not the solution you want but you'd need the ONE XR part # RTT-60371 which comes with the T-Slots needed for the Overhaul HD # Y01151-5855. view full answer...
I would be happy to recommended a weight distribution system for your Shoreland'r SRV55TBB Boat Trailer being towed with your 2011 Ford F-150 Raptor but first you will need the total tongue weight of your setup.
Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo added behind the rear axle of your truck. Using a tongue weight scale like the # e99044 is an easy way to get an accurate tongue weight measurement, but there are... view full answer...
The Yakima OverHaul HD # Y01151-58 can install with a tonneau cover if you use the adapter # Y01155 but you'll have to use a tonneau cover on your 2020 Ford F-150 Raptor that has tracks for this like the RetraxPro XR part # RTT-80373. view full answer...
The best suspension enhancement solution out there for what you are looking for on your 2019 Ford F-150 Raptor is the RoadActive Suspension kit # RAS3611 as it gives the support you are wanting to reduce the sag when carrying cargo weight or towing but actually improves the ride quality and handling of the vehicle whereas basically every other option out there is going to sacrifice ride quality. view full answer...
The Camco Olympian Grill Storage Bag Item # CAM57632 has a main compartment that is 22" long x 14" wide x 9" tall. Your grill would have to be up to that size but no larger to fit properly in this bag. view full answer...
It sounds like you are wanting to install a ladder rack onto your 2019 Ford Raptor that has a tri-fold tonneau cover installed on it already. This may be possible, but your tonneau cover must mount inside the bed rails, not on top of the bed rails. If the tonneau cover mounts on top of the bed rails then it will interfere with the way a ladder rack installs onto the bed rails.
The Rapid Switch Systems Pro Sport Truck Bed Ladder Rack # RS67FR that you were looking at will not work since... view full answer...
Your 2008 Fleetwood Evolution E3 has an unloaded hitch weight of 395 lbs; when you add the loaded cargo a weight distribution system would definitely help especially with sway control and additional weight of whatever you will load on the cargo deck.
Assuming you have that cargo deck for a reason and will be transporting something of decent weight I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW # EQ37100ET which is rated for... view full answer...
I really like the SumoSprings Solo Custom Helper Springs - Rear Axle part # SS52GR for this situation. They engage much more smoothly than the Timbrens part # TFR150RB do. The overall user experience is going to be better for you since you won't feel them engage which is common on the Timbrens. The 1500 lb. capacity is at 50% compression so at about mid stroke the more they get compressed the more weight they take up.
Please keep in mind this doesn't raise your vehicles towing capabilities... view full answer...
The best suspension enhancement we offer for your 2020 Ford F-150 Raptor is the RoadActive System part # RAS3611 as it gives you adjustable support like you are wanting to reduce the sag but it also doesn't make the loaded or unloaded ride quality harsh like other options. And also isn't as high maintenance as the air bag kits. view full answer...
There are two recommended sizes for Yakima HD crossbars when using the Yakima OutPost on your 2019 Ford F-150 Raptor. Those are the following lengths:
- Yakima OutPost HD Overland Truck Bed Rack - Aluminum - 500 lbs - 78" # Y01152-59
- Yakima OutPost HD Overland Truck Bed Rack - Aluminum - 500 lbs - 68" # Y01152-58
Between these two choices, I recommend going with the 78" # Y01152-59. This is because you ultimately receive more crossbar space for mounting accessories and cargo on your... view full answer...
I prefer the SumoSprings Custom Helper Springs # SS52GR for your 2019 Ford F-150 Raptor 4WD over an Air Lift system because the SumoSprings are a maintenance free solution; you're never going to need to go find an air compressor each time you want to tow something.
The other thing is that because you'll be doing some light off-roading, the SumoSprings won't reduce your suspension travel since they're only bolted to one spot on the frame where the Air Lift system bolts to the frame and... view full answer...
I believe you have a 2020 Ford F-150 Raptor which for a base plate kit then you'd want the part # RM-524431-5 which is a confirmed fit and the easiest to use. I attached an install video and install instructions for this for you to check out as well.
Then for lighting the Roadmaster diode kit part # RM-15267 would be a great option that I also attached an install video for on a 2018 Raptor.
For an easy braking solution the Blue Ox Patriot part # BLU37TR installs easily in floorboards of truck. view full answer...
I'm happy to recommend a tonneau cover and we can get you a bike rack for your 2020 Ford F-150 Raptor, but there is no way to use a truck-bed bike rack with a tonneau cover as they will interfere with each other.
So let's start with the tonneau, and since you want to ensure protection for your truck bed, the best option is definitely a locking cover, and for that I highly recommend the RetraxONE MX Hard Tonneau Cover # RT60373.
As for a bike rack on your 2020 Ford F-150 Raptor, this is... view full answer...
The only chain style tension adjustment weight distribution system we offer that allows for the amount of drop adjustment you need for your setup is the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1006 which offers up to 7 inches of drop. The Blue Ox SwayPro # BXW1006 offers a maximum tongue weight of 1000lbs. You will also need a 2 5/16 hitch ball with either a 1inch or 1 1/4inch shank like the Draw-Tite 2 5/16inch Hitch Ball # 19286
I attached a video review of the Blue... view full answer...
It sounds like you have a Kuat Dirtbag Bike Rack part # DRT15x110 and are wanting to install this directly into the tracks on a Retrax XR Hard Tonneau Cover. If that is the case then you should be able to use the Thule Adapter part # THXADAPT12 for this as the channel bolts for the crossbars are similar to that of those for the rails.
The Replacement Stainless Steel T-bolt for Truck Rack part # 853-5648 and the Replacement Square Nut for Thule M.O.A.B. Roof Mounted Cargo Carrier part... view full answer...
If you want the best suspension support, ride quality, and handling for your 2013 Ford F-150 Raptor when carrying the truck bed camper you'd want the RoadActive Suspension kit part # RAS2691.
The other options you mentioned will give you support but they will make the ride quality harsher and won't improve handling like the RAS so it's your best choice by far. view full answer...
We do have a RoadActive Suspension system part # RAS3611 that is a confirmed fit for your 2020 Ford F-150 Raptor and is the best option for suspension enhancement. Unlike other options this gives the support you want while also improving ride quality and handling. Most options end up making the ride quality pretty harsh. view full answer...
For a complete flat towing setup for your 2012 Ford F-150 Raptor you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I recommend the following:
Direct-Connect Base Plate Kit - # RM-524431-5
Nighthawk All Terrain Tow Bar w/ LED Lights - # RM-676
Custom Tail Light Wiring Kit - # HM56000
Brake-Lite Relay Kit - # RM-88400
Brake System - Part # DM86VR for hydraulic or part # DM26VR for air motorhome... view full answer...
As long as you don't exceed the weight capacity of your hitch, vehicle, or cargo rack, you will be fine. If you want to upgrade your trailer hitch receiver on your 2018 F-150 Raptor for safe measures, you can go with the
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C26HR which can handle up to 1000lbs tongue weight. You'll want to make sure you never exceed your vehicle's capacity though.
In regard to the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch # 325-GH-1426... view full answer...
Go To Results