For the first slide (71" wide flange to flange) you will want to use the Solera RV Slide-Out Awning part # LCV000165063 for black or part # LCV000163279 for white. For the second slide (81" wide flange to flange) you will want to use the Solera RV Slide-Out Awning part # LCV000165062 for black or part # LCV000163287 for white. For the last slide (148" wide flange to flange) you will want to use the Solera RV Slide-Out Awning part # LCV000165061 for black or part # LCV000163299 for white. view full answer...
For your 56" wide slide-out, as measured from the outside of your RV, flange-to-flange of the slide-out.
- Solera RV Slide-Out Awning, # LCV000168104 - black
- Solera RV Slide-Out Awning, # LCV000163273 - white
For your 111" wide slide-out:
- Solera RV Slide-Out Awning, # LCV000251461 - black
- Solera RV Slide-Out Awning, # LCV000163292 - white view full answer...
We have exactly what you need! When choosing a slide topper you always pick one that is roughly 6" longer than the slide out. This will include the trim that goes around it. These are available in Blackor White and it really just comes down to what you like the look of.
For your 4' 11" Slide use the Solera RV Slide-Out Awning - 5'7" Wide - Black part # LCV000231482 or White part # LCV000163274.
For your 6' 8" slide use the Solera RV Slide-Out Awning - 7'7" Wide - Black part # LCV000168106... view full answer...
Yes, we do offer the Solera 5000 Series RV Slide-Out Awnings. The correct one for a 103" slide out (flange to flange) is part # LCV000168108 for black or part # LCV000163290 for white and the correct one for a 88" slide out (flange to flange) is part # LCV000168106 for black or part # LCV000163288 for white. view full answer...
10 inches between two slide outs wouldn't be an issue at all for the install of slide toppers on your RV. Normally there only needs to be 3 inches between a slide out and the nearest obstruction on the side of the RV so 10 inches between slide outs wouldn't be a problem at all.
For the 89 inch slide out you would want the part # LCV000163288 and for the 150 inch part # LCV000163298. view full answer...
You'll want to use the Solara 9'7" RV slide out awning which is designed for RV side outs that are between 110 and 115 inches wide, measured from flange to flange.
The awning is available in black as part # LCV000251461 or white as part # LCV000163292.
I've linked to a product demonstration and an install video that you might find helpful. view full answer...
Yes, if your slide-out measures across the front, from flange-to-flange, at 181" then the Solera RV Slide-Out Awning, # LCV000251478 is correct part. view full answer...
Yes the Solera RV Slide Out Awning part # LCV000163290 that you referenced would fit on a travel trailer that has a Lippert Slide out Awning Prep Kit. view full answer...
In order to find the correct Solera RV Slide-Out Awning you'll need to measure the entire slide out from the edge of each flange. If you measured 154" then you'll need to use the Solera RV Slide-Out Awning part # LCV000168109 for black or part # LCV000163300 for white. view full answer...
The correct Solera RV Slide-Out Awning for a trailer with 149-1/2" slide-out (flange to flange) is part # LCV000165061 for black and part # LCV000163299 for white. view full answer...
If the slide out on your RV is the Lippert In-Wall Slide-Out then the replacement motor part # LC236575 that you referenced would be the correct replacement for it.
If you have something different let me know. I also attached a link to all of the Lippert slide out motors we offer as well. view full answer...
We have what you need. The only two colors made in these products are black or white.
These sizes will fit your slide outs and have 2-1/2 inches of overhang on each side as is recommended by the manufacturer. I will list the black colored options first and the white colored options second.
Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106.
Solera RV Slide-Out Awning - 7'7" Wide - 48" Projection - Black # LCV000168106.
Solera RV Slide-Out Awning - 9'1" Wide... view full answer...
For you slide of 111" or 110" use the Solera RV Slide-Out Awning part # LCV000251461 for black or part # LCV000163292 for white.
On the 102" use the Solera RV Slide-Out Awning part # LCV000168108 for black or part # LCV000163290 for white view full answer...
The correct Solera RV Slide-Out Awning you will need is part # LCV000165062 for the 85" slide-out, part # LCV000168107 for the 93" slide-out, and part # LCV000165061 for the 151" slide-out. In regards to adding additional length to your measurements, this is no longer required as the extra length is now already factored in to avoid confusion.
For example, the Solera RV Slide-Out Awning part # LCV000165062 is listed as a fit for slide-outs 80" - 85" but you don't need to add any extra... view full answer...
For the flange width of 89 inches the Solera RV Slide Out Awning you'd need is the part # LCV000168106 that you referenced which is black and for the 82 inch slide out you'd want # LCV000163287 which is white. We don't have this size in black so if you wanted all of the slide toppers to match you'd want the part # LCV000163288 for white for the 89 inch slide out. view full answer...
While some manufacturers will say that a slide out jack isn't needed we've found that they do make a noticeable improvement to overall stability when parked which means a more solid feel when walking around in the RV and also less chance of getting woken up at night due to movement.
We have a few sizes that you'll have to measure your RV to determine which would work best. We have the part # UF19-960002 which is 21 inch to 37 inch, part # UF19-960001 which is 16 to 28 inch, and we have... view full answer...
I was able to cross reference the slide-out motor 522735 to the Replacement Gear and Motor Assembly for RV Slide Out part # LC386735 which is the correct replacement you need. view full answer...
For your 2020 Forest River Sunseeker built on a Chevy 4500 chassis the Roadmaster rear sway bar part # RM-1109-173 is the correct fit, and then for a front bar part # RM-1109-149.
We can help with a slide out awning as well but I would need you to get me the flange to flange outside dimensions of your slide out so that I can pick out the correct size. view full answer...
The correct slide topper awnings for a Jayco Eagle HT 312BHOK are as follows:
Solera RV Slide-Out Awning - 11'1" Wide part # LCV000163295
Solera RV Slide-Out Awning - 7'1" Wide part # LCV000163287 view full answer...