We do not have any custom fit hitches for your 1969 Buick Electra but you may be able to have a shop fabricate one using some of the hitch fabrication parts we carry. I have included a link to the hitch fabrication parts for you.
Another possible option is a weld-on hitch. I have included a link to the weld-on hitches that we carry as well. view full answer...
We do carry a range of hitch fabrication plates such as the Buyers Products Fabricators Hitch Plat part # 3371809040 which measures 34-5/8" wide x 15-5/8" tall. That said, these are universal in design as the end product requires modifications to fit the exact application. I don't have any options specific to a particular make or model but these are the same plates you do see installed on big rigs so what you need to do is choose the one with the best dimensions for your particular application... view full answer...
If you are planning on having a crossmember welded to the frame of your trailer you would be best off just having the part # 41990 welded to the frame as that has the hitch opening already welded to it. Or we have the part # 41990-07 which has the hitch attached to drop brackets. view full answer...
The only front mount hitch option for your 2004 Ford F-250 is # 65022. But this receiver will exit in between the tow hooks. I cannot recommend using a custom hitch such as # C31014 for fabrication but you could use fabrication parts to have a custom fabricator make a hitch that will fit. I have linked the hitch fabrication parts we carry. You would just need a crossmember. This is likely going to be less expensive then trying to adapt a hitch to fit. view full answer...
We do have other 2-1/2 inch combo bars if you want something shorter than 18 inches. We have a 12 inch model, # 337RT255812, and we have an 8 inch model, # 337RT255808. Since these are hitch fabrication parts they can be cut to the length needed. view full answer...
I have a possible solution for you but I spoke with Curt and they said not to use spacers or anything like that to install hitch # 13703.
But you might be able to have a professional welder fabricate a hitch that will span the width of your Keystone Raptor. They could use some of the hitch fabrication parts that we carry which I have linked to the right.
None of the other hitches are wide enough so having a hitch custom fabricated would be the way to go. view full answer...
While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit.
The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength.
Buyers Products Fabricators Hitch Plate: part # 3371809040 (1/2" thick x 34-5/8" wide x 15-5/8" tall)
Buyers Products Fabricators Hitch Plate: part # 3371809042 (5/8" thick x 34-1/2"... view full answer...
The widest frame width the Curt Adjustable Width Trailer Hitch part # 13703 will fit is 72 inches. This is measured from outside to outside of the frame members. For a hitch on your RV you will have to have something fabricated up by a qualified welder.
I attached a link to all of the hitch fabrication parts we offer that you might be able to use. view full answer...
Hitch manufacturers do not test custom fit hitches on RV cut away models because there are too many different bodies that could be put on the chassis for them to test them all. Your best option would be to use a weld on hitch, see link, or have something fabricated using some of the hitch fabrication parts we carry, also linked.
Welding should be performed by a qualified professional welder who can guarantee the hitch capacity once fabricated and/or installed. When welding to the vehicle... view full answer...
I wish we had a custom fit hitch available that would fit your ambulance, but nothing we have is going to be a direct fit. The best recommendation I could make for you would be to take your ambulance to a qualified fabricator and let them fabricate the best possible solution.
I attached a link to a page that has all of the hitch fabrication parts we offer. view full answer...
The best trailer hitch option we'll have for an International 4700 Series Truck is the Buyers Products Fabricators Hitch Plate part # 3371809027A. This is a hitch plate that will be used for custom fabrication. It can then be outfitted with a receiver tube, pintle hook, etc.
I have attached some other plate size options for you in a list below. view full answer...
I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you are not an experienced welder then I recommend taking both the hitch plate and your truck to one for installation. The hitch plates below all come with d-rings for the safety chains as well as gussets for added strength.
Buyers Products Fabricators... view full answer...
There is no custom fit trailer hitch available at this time that will install on the 1985 Chevy Stepside pickup and be hidden behind the License plate.
I have seen this done in the past but it is a custom fabrication project that requires using a qualified weldor to fabricate a hitch with the proper capacity, and fit for your particular situation. You will also need to come up with a license plate bracket that will allow you to install the ball mount and hook up safety chains to safety... view full answer...
There is not a custom Buyers Products Hitch Plate for a 2000 Dodge Ram. Therefore, you'll have to use one of the Buyers Products Fabricators Hitch Plates like part # 3371809040 and fabricate the rest of the supports needed for installation. The plates will then accept most pintle hooks like the Buyers Products 10 Ton Pintle Hook part # 337PH10. view full answer...
The Combo Bar 6 inch with 2 inch Trailer Hitch Receiver, item # E-9 is designed as a fabrication part to build your own receiver hitch. Welding, by an experienced Welder is recommended for this part. I cannot make welding recommendations for these parts as there are too many variables involved such as types of steel used, welding material used, welding equipment and settings on the welding equipment, not to mention safety concerns.
We do carry RV Hitches (see link) that are adjustable... view full answer...
If your Class A motor home is built on the Ford full size van E-350 or 450 chassis then you can install front mount receiver # 65001 that you have referenced. I have included a link to the installation instructions for you to view.
If it was built on the Ford F-53 chassis then there are no custom fit front mount receivers available and you would need to have one custom fabricated by a qualified professional with knowledge of this type of custom project. We have some hitch fabrication parts,... view full answer...
That is a really wide trailer frame that you have on your camper, and because of that you are going to need to have a hitch fabricated for it as we don't have any multi fit hitches available for a frame that wide.
I attached a link to a page that has all of our hitch fabrication parts that you might be able to use like a hitch bar # 80818. view full answer...
There isn't an install/rail kit for the B and W Turnoverball hitches that fits your 2023 Ford F-350 so there wouldn't be a way that we can recommend you install the B and W Hitch Center Section part # BWGNRC920 that you mentioned. The only way you could use this would be if you would be willing to fabricate a rail kit of some kind. Which if you were open to that the better option would be the part # BWGNRK1500 which was designed for this type of install. view full answer...
You will most likely need to use one of our heavy duty weld-on truck hitches such as # 41990-07 for the flat bed truck. I have included a link to the options for you. Welding should be performed by a qualified professional welder who can determine if the hitch can be built out further and maintain its capacity.
And if none of the weld-on hitches work then a hitch could be fabricated using some of our hitch fabrication parts, also linked. view full answer...
The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an experienced welder for installation of the hitch plate. We have the following hitch plates available:
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043
Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040
Buyers Products Fabricators Hitch Plate -... view full answer...