The trailer hitch I recommend for a 2016 Chevrolet Cruze Limited (Old Body Style) is the Draw-Tite Sportframe Trailer Hitch Receiver part # 24882. It's an excellent bolt-on option. It can then be used with the T-One Vehicle Wiring Harness part # 118508 for towing. That said, you'll also need the Draw-Tite Drawbar part # 3593 along with a hitch ball to complete your setup. I recommend the part # 19256 for 1-7/8" or part # 19258 for 2". view full answer...
Curt actually stopped requiring the use of the stabilizer strap with their hitches like the Curt # E-100 that you referenced which would fit your 4 inch square bumper.
Not all bike racks are reinforced for the rougher ride at the rear of travel trailers like the Swagman XP # S64940 that can carry 4 bikes. This is a really solid choice that is rated for this application as well. view full answer...
Yes, Demco base plates # DM9518287 are compatible with Commander II tow bar # DM9511012. The tow bar also includes safety cables so you would not need to add any.
To add lighting to your 2012 Chevy Cruze you could use a simple magnetic kit, # RM-2120. Or for a more permanent option you could use bulb and socket kit # RM-155. It does look like fuses have to be pulled to flat tow your Cruze, consult the owners manual to confirm. To make this process as easy as flipping a switch you can use... view full answer...
The Blue Ox tow bar wiring kit part # BLU79FR that you referenced does not fit a 2012 Chevy Cruze as it fits Wranglers. For your vehicle there aren't any custom fit options and you'd have to go with a diode kit like the Roadmaster part # RM-15267 which splices into the taillight wiring of your Cruze. view full answer...
In order to install a hitch mounted bike rack on a 2012 Chevrolet Cruze you first need a trailer hitch, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24882 is what I recommend. This can then be used with any hitch mounted bike rack rated for use with a class I hitch. The best one really comes down to the bike type. view full answer...
Your best option is going to be to install a roof rack on your 2014 Chevy Cruze and then use roof rack mounted bike racks on the Cruze to carry your bikes as there are no adapters like the part # D210 that have enough drop for what you are trying to do.
For a roof rack the best bang for your buck option is the Rhino Rack that consists of part numbers # RRVA126B-2, # RRRLKVA, and # DK142.
For a bike rack the Rhino-Rack MountainTrail Rooftop Bike Carrier # RBC035 would be a great option as well. view full answer...
The EZ5 base plate kit part # RM-523190-5 that you referenced will use a 5/8 inch diameter pin to attach to the tow bar like the part # RM-910029. view full answer...
The best fairing option for the Sportrack Roof Rack part # SR1010 is going to be the Inno Fairing part # INA261. When picking out a fairing you want to go with the size that matches the distance between the feet of the rack. So the 40 inch long Inno would be a great option. view full answer...
I do have a solution for you, but the Hollywood Racks Express 3 Bike Rack # HRE3 that you are asking about will not fit on your 2016 Chevrolet Cruze.
If you are looking for a trunk mounted bike rack that holds two bikes, then I recommend using the Thule OutWay with Adjustable Arms # TH45JV. I have included a link to a demonstration video for you to see how it works.
Some people might have problems getting their bikes to sit on a bike rack properly due to having a common women's style,... view full answer...
We have a video of the Curt Hitch part # C11282 being installed on a 2014 Chevrolet Cruze and the distance from the center of the hitch pin hole to the back of the rear bumper is 6-1/2 inches. We'll use that dimension when recommending a cargo carrier that will work for you. I have attached a helpful article that explains how this measurement is taken. The hitch has a tongue weight capacity of 200 lbs.
The hitch-mounted cargo carrier I recommend is the Curt Hitch Cargo Carrier, part #... view full answer...
For your 2016 Chevy Cruze you can put on a Class I hitch with a 1-1/4 inch hitch opening like the part # C11439 for if you prefer an easier install or the part # 24943 which would be more hidden once installed.
I attached install videos for both hitches for you to check out as well. view full answer...
The front strap of the Rhino-Rack MountainTrail Rooftop Bike Carrier # RBC035 that you referenced is a rubber coated stainless steel strap. They will hold up for a very long time.
Check out the review video I attached for the rack as well. view full answer...
From the research I found, the 2012 Chevrolet Cruze has a towing capacity of 1,000 lbs. The Curt Hitch, part # C11282, will work for you. This is a Class l hitch and has a 1-1/4 inch receiver opening. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt.
To tow a trailer you will need ball mount # C45522, pin and clip # F-4, and a... view full answer...
Easiest solution would be to use the Swagman Traveler XCS part # S64664 attached to the shank of your tow bar to carry two bikes there and then install a roof rack on your 2012 Chevy Cruze to carry the other two bikes as needed.
For a roof rack the Rola DFE Extreme part # R5006 is a confirmed fit, installs easily and gives you aero shaped crossbars which will minimize wind noise. The Malone Pilot part # MPG2103 would work great for a bike rack as it's easy to use, fits the Rola rack, and... view full answer...
The Roadmaster EZ2 Base Plate Kit, 523168-1, that you purchased is compatible with all Roadmaster tow bars. I recommend using a Roadmaster tow bar because tow bars from other manufacturers are not directly compatible with Roadmaster base plates and an additional adapter would be required.
I have attached a link to all of the Roadmaster tow bars for you to check out. Each of these tow bars come with a bar to tie the removable draw bars together.
The tow bar that I would recommend is... view full answer...
In order to mount a roof top carrier for luggage, you definitely need a roof rack system on your 2019 Chevy Cruze LT. For a great crossbar system, I recommend the following parts if you have a sedan model Cruze:
- Round 48" CrossBars for Yakima Roof Rack System # Y00408
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2... view full answer...
Your 2017 Chevy Cruze LT Hatchback does have relatively low ground clearance so it's definitely a good idea to try and create some additional height when adding accessories like a cargo carrier or bike rack to the Curt Class I Trailer Hitch # C11458.
The only Class I rated cargo carrier we have available that features a rise in its shank is the Curt Cargo Carrier # C18110. This carrier provides a 3-3/4" rise from the hitch attachment point along with a robust 300 pound weight capacity.... view full answer...
First thing you will need for your 2013 Chevy Cruze is a roof rack. For that you would want the Rhino Rack that consists of part numbers # RRVA126B-2, # RRRLKVA and # DK142. This is a great roof rack that doesn't break the bank like some of the other racks that are on the market.
For a great cargo basket then to fit that rack the Thule Canyon XT part # TH859XT would be a great option. This is also a great basket that doesn't cost nearly as much as the other ones on the market. view full answer...
The 3 trailer hitches we currently offer are Class-I rated and will fit your 2013 Chevy Cruze.
Unfortunately, Class-II trailer hitches are not a fit for your 2013 Chevy Cruze.
At the moment, the most popular trailer hitch is the Curt # C11282. It is custom fit for your Cruze and has a maximum gross trailer weight of 2,000 pounds and maximum tongue weight of 200 pounds. I also included a link showing all 3 custom fit trailer hitches too.
If you will be doing some light duty towing with... view full answer...
The Thule roof rack I recommend for a 2012 Chevrolet Cruze is the Thule WingBar Evo Crossbar System which is composed of part # TH711300, part # TH710501, and part # TH145183. This system contains one of the quietest crossbar designs on the market and is compatible with pretty much all rooftop mounted accessories. It mounts using custom molded door clips for a sleek and secure fit. view full answer...
Go To Results