For your 2001 GMC Sierra, you can use the HappiJac Truck-Mounted Camper Tie-Downs # LC182906-182971.
These camper tie downs are American made, and include 2 front anchor plates, 2 rear brackets and anchors, 1 stabilizing bar, 2 Bumper braces, and the installation hardware.
Additionally, you're going to need a set of turnbuckles like the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs # LC182895 to secure your camper to your truck's tie down system. view full answer...
I checked with HappiJac and the correct camper tie downs for your vehicle is the HappiJac Truck-Mounted Camper Tie-Downs # LC236326-205221.
You're also going to need a set of turnbuckles # TLS9521 to secure your camper to the tie-downs. view full answer...
I believe we have something for your 2022 Ram 2500 Tradesman Crew Cab, take a look at the:
-HappiJac Truck-Mounted Camper Tie-Downs # LC236326-205221.
These tie downs will fit onto 2022 Ram 2500 trucks with the 6-1/2' and 8' bed with/without running boards and with a factory installed hitch.
Additionally, you will also need a set of turnbuckles like the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs # LC182895 to allow you to secure your truck camper to your tie down system. view full answer...
Yes, you can use the Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB with your 2015 Ram 2500. These tie downs will install on your truck by clamping onto the side rails in your truck bed and will require no drilling.
You're also going to need a set of turnbuckles to secure the camper to the tie downs. I recommend going with the TorkLift FastGun Turnbuckles for Bed-Mounted Camper Tie-Downs # TLS9521. These turnbuckles are super easy to use and will reach 14" to 21 1/2". view full answer...
According to my contact at CR Brophy Machine Works, their # HSSF truck bed camper tie-downs are compatible with the 2016 Ford F150. You'd also need the hardware package, part # TDHP, which includes the hooks, turnbuckles and lengths of chain to connect the tie downs to the camper. view full answer...
I haven't heard of a specific issue like that with the 2013 Chevrolet Silverado. But there is truth that stake pocket tie-downs are not as secure as clamp on tie-downs. There's a lot pulling on the tie-downs and with the stake pocket design there's a lot of movement and chance of damage to the truck.
We have a couple options by Brophy, # HSSF and # HSAB.
Both are better than a stake pocket tie-down. view full answer...
Since you're going with occasional use of your Lance camper I recommend the following parts for a tie-down system on your 2011 Chevy Silverado 2500:
- Brophy Clamp On Camper Tie-Downs # HSAB
- Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP
Happy camping! view full answer...
For your 2010 Nissan Frontier, I recommend the:
-Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB.
These are universal camper tie downs that will fit trucks with bed rails less than 5-1/2" wide, and include the front and back.
To secure your camper to the tie downs, you're going to also need a set of turnbuckles like the:
-Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP.
Attached is a review video for you to check out as well. view full answer...
TorkLift offers a few different camper tie-down choices based on how your truck is equipped. The presence of running boards/tube steps and where they sit will affect the front tie-downs you want to use. Regardless of the presence of running boards and where they're located you'll use the # TLD3112 rear tie-downs.
If your truck has no running boards or the OEM power running boards, you'll use # TLD2140 for the front tie downs.
If you have stationary running boards, you'll use # TLD2142.
For... view full answer...
We do carry rear camper tie downs, however for your 2021 Toyota Tundra, we only have the TorkLift Custom Frame-Mounted Camper Tie Down # TLT2310.
You could also use the Brophy Clamp On Camo Tie-Downs # HSAB with the turnbuckles # TDHP. view full answer...
Though there is no Happijac Tie Downs available for your 2022 GMC Sierra 3500 we do have another option. The Torklift Custom Frame-Mounted Camper Tie Downs Front # TL44FR and The Rear # TL84FR are confirmed for your vehicle.
The tie downs provide attachment points at the front and rear of your truck bed for securing a bed-mounted camper. The tiedowns have a powder coated steel construction.
The TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK. These tie... view full answer...
We do offer the Brophy Camper Hold Downs, part # HSSF, that will work with your 1997 GMC 1500. They are not stake pocket tie downs, but they wrap around the bed rails and are mounted inside the bed. They should not damage the outside of the truck as long as there is not too much stress from the chains. We have not had any customer complaints about damage to their vehicle. There is no weight capacity rating for these hold downs and will work with your 1200lbs camper as long as it is 8-1/2... view full answer...
The TorkLift # TLC2205A and # TLC3205A Talon camper tie-downs will work great with your 2005 Silverado 2500 if it isn't equipped with running boards or tube steps that run under the truck bed and is equipped with the factory hitch.
The only other thing you'll need is turnbuckles like the stainless steel TorkLift Fast Guns, part # TLS9526-2-LK and a trailer connector in the truck bed if there isn't one there already. You can install one using part # C56000. view full answer...
It sounds like you're looking for TorkLift camper tie downs for your 2017 GMC Sierra 2500 Denali with a short bed. If you've got a factory hitch and no step or running board that extends under the bed of the truck, then the correct TorkLift tie downs are parts # TLC2220 (front), and # TLC3215 (rear). If you also need new turnbuckles, you can use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black # TLS9529-2-LK.
If you actually need to replace... view full answer...
The correct tie downs will depend on if your 2005 GMC Sierra 3500 with 8 foot bed has a board or step underneath. I have listed the correct Torklift part number for front only tie downs for each style.
3500 - 8 Foot Bed - without board or step underneath truck bed:
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204
3500 - 8 Foot Bed - with board or step underneath truck bed:
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC4203 view full answer...
It sounds like you're looking for camper tie downs to fit on your 2014 Chevy Silverado 1500 Crew Cab with running boards that extend the length of the cab and a factory hitch. If this is correct, then you'll want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2218 (5-1/2 foot bed) or # TLC2217 (6-1/2 foot bed) for the front tie downs. For the rear tie downs you'll need to use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3214.
If you don't have turnbuckles... view full answer...
For your 2010 Dodge Ram 3500 you're going to have a couple of options to choose from.
- If you have a crew-cab 4x4 with a single rear wheel and a 6-1/2' bed then you're going to need the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2119 for the front, and the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 for the rear.
- If you have a crew-cab 4x2 with dual rear wheels and a 6-1/2' bed, then you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2120 and... view full answer...
You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs # TLF2021 and # TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since these are available you'll be able to go ahead and order those extended running boards. For rear tie downs, you'll want to use the # TLF3008 or # TLF3008A (aluminum), which are also confirmed for your new truck.
If you also need turnbuckles for... view full answer...
When installing tie downs on your 2022 Chevrolet 1500 LTD 5-3/4 foot bed with factory hitch, The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2224 and The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TL54FR are the correct tie downs for your vehicle.
The tie downs will provide attachment points at the front and rear of your truck. The frame mounted design ensures excellent handling. The tie downs have a powder coated steel construction.
I attached a couple... view full answer...
Yes we do - for your 2022 Ford F-150 you'll just want the TorkLift Camper Tie-Downs # TL67CR. Since these aren't available in a kit, you're also going to need the rear tie downs # TLF3007.
Finally, to secure your camper to your truck bed you're also going to need a set of turnbuckles # TLS9520. view full answer...
Go To Results