The FasTen RV Leveling Blocks, part # CAM44512, do not need caps. Since they interlock they'll remain stable and they're designed to handle an extremely high amount of weight. view full answer...
I have a solution for you, but the Valterra # A10-0900 is going to be the tallest jack stand that we have available. I recommend using one or two of the Stackers Leveling Block # A10-0917 under this jack stand to give you enough clearance to easily release the tension bars and remove them from your weight distribution hitch. You can also get a pack of 10 Stackers Leveling Blocks with part # A10-0918. Each Stacker Leveling Block will add 1-3/8" of lift to your jack stand. view full answer...
I recommend just using a patch kit like the Alpha Systems Patch Kit for SuperFlex RV Roof Membranes # AL57CV to cover the hole.
Since you're planning on getting rid of your RV anyways this'll be the best, relatively inexpensive solution. This kit includes a 3' x 2' membrane patch which will be plenty big since the average roof vent is 14-1/4" x 14-1/4", along with some self-leveling sealant.
This patch kit is grey, however we also have this available in white # AL37CV if that works better... view full answer...
We're very sorry to hear about your loss. Hopefully we can help you find something that will give you the confidence to maneuver your RV without any worries!
When it comes to your existing system, there really shouldn't be any issues with a WiFi backup camera being used on the back of your RV. This is a really common thing nowadays and in most cases these camera systems are designed to transmit up through the back of the vehicle without any issues; it honestly just might be an error with... view full answer...
While we do not have something like that, we do still have something you may be interested in.
Instead, we have the SnapPad Grand Jack Pads for Equalizer Leveling Sytems w/ 10" Octagon and 12" Round Feet # SP84FR74.
These pads will add extra stability while on soft ground, eliminates the need to crawl under your rig for leveling, and will fit your 2 11-1/2" round feet & your 2 10" octagon feet.
I have included a review video for you to check out as well. view full answer...
The Black MaxxAir II RV and Enclosed Trailer Roof Vent Cover # MA86JR is a solid black. I went out to our warehouse with a flashlight to see how much light would pass through. Other than the vented part no light came through at all. Now, my flashlight isn't quite as bright as the sun but I'm confident it will block considerably more light than the Smoke, # MA00-955003 view full answer...
From a fitment standpoint, RAS # RAS34FR generally fits lifted trucks like your 2009 Toyota Tundra without an issue as long as this is a block style lift. An issue may arise if the lift block is fabricated in an odd shape that interferes with our axle connecting brackets, or if it's a complete suspension swap; if you've got a full on suspension lift with elongated springs or other adjustments to the suspension the RAS will not work for you.
If you've got a suspension lift, I recommend... view full answer...
If the crossover tube on your 1996 Suzuki Sidekick 2-door is open you will need to use base plates # 118-3. But you mentioned that it is open with a bracket welded on each side. If that bracket is not blocking the openings on the crossover tube then # 118-3 is correct. I have included a link to the installation instructions for you.
The 118-3 base plates have a part of the bracket that looks like a tube that needs to be inserted into that crossover tube. If the ends are blocked then you... view full answer...
I would recommend The Stromberg Carlson Folding Handrail for Fleet RVs - Stainless Steel # AC-544. The folding hand rail secures in the open position with an unique locking mechanism. The hand rail can be folded against the wall and out of the way when not in use.
The handrail has a heavy-duty stainless steel construction that will help resist rust and corrosion. The kit includes anodized aluminum mounting blocks and hardware.
I attached a review video link below. view full answer...
I'm assuming you have a tandem axle trailer and therefore 4 wheels.
The highest rated tires we carry for 15 inch rims is load range E with a capacity of 2,830 pounds. Multiplied by 4 that's 11,320 pounds which is a good amount for your 12,000 pound trailer. Keep in mind not all of the trailer's weight is on the axles and wheels. Approximately 20 percent is on the hitch and therefore riding on the rear axle of your truck. It's actually pretty normal for a trailer's tires to be rated... view full answer...
Yes, you will need to use the Wedge Block # LC79UD for the Lippert Turning Point pin box on your Grand Design 5th wheel RV camper. This is a universal block that will fit into the funnel on the B&W Patriot 5th Wheel Trailer Hitch # BWRVK3255 and prevent the pin box from pivoting on the king pin. Instead the pivot point will be back where the pin box mounts to the 5th wheel mounting plate. Do be sure remove the lock out bolts on the pin box before driving with the wedge installed. view full answer...
No, you will not need to use a spacer. Since the lift ended up being only 1" higher than the factory lift you will not need a spacer like the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2366 when installing an airbag system like the Firestone Ride-Rite Air Helper Springs # F2550 in your truck. The # F2550 is the correct Firestone Ride-Rite Air Helper Springs for your 2010 Ford F-350.
The Air Command Compressor System # F2610 will work with the # F2550 if you want a compressor... view full answer...
The Replacement Touch Pad Control Panel for Lippert Power Gear Hydraulic RV Leveling System # LC58CJ is the correct replacement for the Lippert Power Gear hydraulic RV leveling system (500105E) and will not work for your Thor Delano.
The 175225 part number you mention actually corresponds with the Replacement Lippert Control Panel with Amp Connector for 4-Point Leveling System # LC175225. view full answer...
I spoke with my contact in the Tech Services department at Air Lift, and was told that if your lift is actually 6 inches, you would indeed need the 52465 angled spacers which we offer as part # AL79GV.
My Air Lift representative suggested that you confirm that the lift in the rear IS actually 6 inches. Some trucks are equipped with a level lift, which raises the nose of the vehicle by 6 inches and the rear by 4. If that's what you have you'd need the # AL49GV spacer instead. view full answer...
It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness # LC178278.
This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling System # LC53ED into your RV.
I have also attached a product overview video for you to check out if you haven't already. view full answer...
Part # RM-048-4 is not to be used with any kind of trailer; they are to be used with towbars to pull vehicles behind RVs. They are not built to support the tongue weight of a trailer. Even though the part states that it can hold up to 400 pounds tongue weight and your trailer is at 325 pounds it should not be used. When towing a trailer, when the trailer hits a bump and comes back down it will be exerting more than 325 pounds of downward force on the tongue. This does not happen with a... view full answer...
I spoke to Lippert directly, and they said it is a discontinued product with no replacement, you would need to replace the entire system, unfortunately.
If you are wanting to upgrade the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC358590. This system is a 4-point set that features an electronic leveling system that allows quick and easy level and stabilization. This also features a auto level feature that levels your trailer perfectly with... view full answer...
We do not currently offer any automatic leveling systems for you to use on your 2017 Keystone Passport Elite, however we do have another option.
The Ultra-Fab Power Twin II # UF39-941705 is an electric stabilizer that uses dual motors for easier leveling than doing it by hand. It has a fairly universal design since it can fit on trailers and RVs that have frames which range from 48-80 inches wide. Another great feature is the extra-large footplates that are on the stabilizer. The stabilizer... view full answer...
Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC675817, if it's less than 20' then you'll want the 4 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC358590.
Since your trailer is 37' long, then I'd wager the 6 point system... view full answer...