Yes, you will need a sliding fifth wheel hitch to give you the clearance you need. I recommend the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034, which features a pivoting head to allow for easy hookup and disconnect. This hitch also provides 14" of additional clearance for tight turns.
A normal sliding hitch will cause you to get out of your vehicle to manually move your hitch for each turn you want to make. Since the Demco Hijacker is an automatic sliding hitch,... view full answer...
We do have some lifts to help make it easier for someone to load and unload the B&W Companion # BWRVK3775 in your 2020 GMC Sierra 2500.
If you use the B&W 5th Wheel Lifting Device # BWRVXA3130 and the Viking Solutions Rack Jack Magnum Hoist with Winch for 2" Hitches # 310-VMH001 it can make getting the hitch in and out of your truck easier. We don't have a hydraulic option, but this system can handle up to 650 lbs which is more than enough for the 5th wheel hitch. view full answer...
Yes, you do have the correct part numbers. For your Demco Autoslide 5th Wheel Trailer Hitch # DM8550034 the Side Plates # DM6003 are the part number 6003 you referenced. To mount on the Underbed Rail and Installation Kit # DM8551010 for your 2019 GMC Sierra 2500 you will need the Side Plates # DM6004. view full answer...
The hardware kit needed to join your # C16520 A16 Hitch Head/Center Assembly to the # C16560 slider assembly is part # C35UR. It includes 4 bolts, 4 washers and 4 nuts.
Curt doesn't offer just the handle bolt/spring as individual parts, but they're includes in the # C58UR Replacement Handle assembly which includes the handle, the grip, the lock bar, (2) M8 cap screws and washers and 1 latch spring. view full answer...
B&W offers both a sliding version, part # BWRVK3775 and a stationary version # BWRVK3710 of their excellent Companion 5th wheel hitch.
We typically recommend going with a sliding 5th wheel hitch on any truck with a bed shorter than 8 feet in length, to prevent the corners of the 5th wheel from striking the rear of the truck cab during turns. There are a few exceptions, though:
• If your truck uses a rotating pin box such as the Reese Revolution/Sidewinder or Lippert Turning Point, these... view full answer...
While we do not have something like that, we do still have something you may be interested in.
Instead, we have the SnapPad Grand Jack Pads for Equalizer Leveling Sytems w/ 10" Octagon and 12" Round Feet # SP84FR74.
These pads will add extra stability while on soft ground, eliminates the need to crawl under your rig for leveling, and will fit your 2 11-1/2" round feet & your 2 10" octagon feet.
I have included a review video for you to check out as well. view full answer...
The 7-Way Vehicle Power Adapter with Power Switch For Furrion RV Observation Camera # FR87PR will boost the amperage to fix the signal strength of the Furrion Vision S Camera System # FCE48TASL-05.
I attached a review video link below. view full answer...
On most vehicles you will bolt it back to where it was initially when you received it (first hole) on the roller plate, when installing The RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-HD onto your 2020 GMC Sierra 2500. The roller plate will need to be flush with the leaf spring and against the U-Bolt. After the RAS is installed you will want to test drive your vehicle and see if the ride is comfortable enough for you. If not you can adjust it to the next set of holes... view full answer...
It sounds like you have a camera system like the Furrion # FR98NR with the side view cameras. For this you will need a 7-Way Vehicle Power Adapter # FR87PR. This adapter works with the PWM wiring from your 2021 GMC Sierra 2500HD to give the cameras the constant 12 volt power they need. view full answer...
I have a solution for you, but the Curt # C16418-104 is designed for older model Chevy/GMC trucks. Instead you'll want to use the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck - Carbide Finish # C16429-204, which is a confirmed fit on the 2020 GMC Sierra 2500 (both short and long bed) and will work with your Curt A16 hitch.
I've linked an installation video that you may want to have a look at if you're going to be installing this yourself. view full answer...
I recommend using the B&W Companion Slider for the Chevy/GMC OEM Prep Package # BWRVK3775, which is one of our most popular hitches and well known for it's durability and high quality; it's also made in the USA as an added bonus. The Companion hitch has a 1" thick jaw that provides 360 degree jaw to kingpin contact; this helps provide better security and less rattle than traditional slide bar jaws. The Companion also has a fully articulating hitch head, which helps make hooking up easier... view full answer...
It sounds like you're looking for TorkLift camper tie downs for your 2017 GMC Sierra 2500 Denali with a short bed. If you've got a factory hitch and no step or running board that extends under the bed of the truck, then the correct TorkLift tie downs are parts # TLC2220 (front), and # TLC3215 (rear). If you also need new turnbuckles, you can use the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black # TLS9529-2-LK.
If you actually need to replace... view full answer...
We have the perfect gooseneck trailer hitch available for your 2015 GMC Sierra 2500!
The Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit # C611-624 has a chrome-plated hitch ball that easily removes when you're not towing for complete access to your truck bed. The hitch has an easy, one-person installation with included custom mounting kit. The hitch has a carbide black powder coated steel that is durable and corrosion resistant.
The Curt hitch has a gross... view full answer...
To tow your 5th wheel trailer with your 2023 GMC Sierra 2500 with a 6-3/4' bed you will need a base plate kit and a sliding 5th wheel hitch.
Base Rail Kit:
- Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck # C16429-204
This kit will fit your Sierra and provide you with industry standard rails to use a 5th wheel hitch.
Sliding 5th Wheel Hitch
- Curt A20 5th Wheel Trailer Hitch w/ R20 Slider # C16541
The sliding 5th wheel hitch will allow you to have the proper clearance... view full answer...
Because you have a short bed truck I recommend The B&W Companion OEM 5th Wheel Hitch # BWRVK3775 for your 2023 GMC Sierra 2500. This 5th wheel hitch has a direct bolt-on fit and requires no adapters and also has a sliding feature so you can gain clearance from the cab so you will no problems making turns.
I like The B&W hitch over the others that we sell because it is by far the best hitch on the market because it has a thick dual jaw design which allows it to grip the kingpin tightly... view full answer...
I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500.
This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions:
43 Sq Ft - # RR32112
48 Sq Ft - # RR31101 view full answer...
Yes. You can swap the legs on your Curt Q25 5th Wheel Hitch Head # C16565 with the Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package - 25,000 lbs # CU53FR. These legs will allow you to utilize the OEM prep package on your 2020 GMC Sierra 2500.
I've linked a review video of these legs for you to have a look at, as well. view full answer...
For your 5,000lb axle, with a 12" brake assembly, you can use the:
-Dexter Nev-R-Adjust Electric Trailer Brake Assembly # 23-458.
Even thought this is stated to work for a 6K axle, it will work perfectly fine with your 5K axle.
Should you want the left and right sides, you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459.
I have included a couple installation videos for you to check out as well. view full answer...
Yes the Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package # RP26FR that you mention will fit your 2022 GMC Sierra 2500 with the factory prep package perfectly!
This hitch has a maximum towing capacity of 20,000-lbs, a vertical load limit of 5,000-lbs, and features three height settings: 14", 16" and 18".
Attached is a review video for you to check out as well. view full answer...
As long as your truck doesn't have a body lift, meaning the bed is further away from the truck's frame than stock, you should be fine.
The B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W with the installation kit # BWGNRK1016-5W is exactly what you need.
This hitch has a maximum towing capacity of 20,000-lbs, has 3 height setting adjustments to ensure your 5th wheel is as level as possible, and when the 5th wheel is removed, will provide a connection point for a goose ball. view full answer...
Go To Results