The Retrax-specific kits include the necessary mounting feet to attach to the Retrax XR channels in covers like the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails - Retractable # RTT-80453 and the compatible Rhino-Rack Vortex Crossbars. These are available in 65" Vortex Crossbars as part # RRVA165B-RRRLT600 or 71" bars as part # RRVA180B-RRRLT600. view full answer...
I have a solution for you. Unfortunately, I confirmed with my contact at Yakima that they do not make fat-tire cradles for the Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches # Y02445. The only other option for transporting your fat bikes is to purchase a rack that has cradles that are wide enough to fit your 4-1/2 inch wide tires.
While this information may be understandable frustrating to hear, we do have some great bike racks that can carry 2 electric fat-tire bikes. For a great... view full answer...
We might have a plug and play option that could work for you, the Hopkins # HM11141164 which would install as shown in the linked video. You'll need to remove the taillight assemblies to access the connector that attaches the taillight to the vehicle's taillight wiring harness. You can compare the connectors on the # HM11141164 harness to what's on your truck, I'll provide some close up photos of the connectors for easy comparison.
If the connectors you find don't match what's shown in... view full answer...
First, you are going to want to check the owners manual on your 2010 Chevy Colorado to determine if it can be flat towed. I did some research and found that if you have a 2 wheel drive model with the 4L60E transmission, you would need a transmission lube pump kit from Remco to flat tow the truck.
If you have a 2 wheel drive manual, the vehicle cannot be flat towed. And if you have a 4 wheel drive automatic or manual it is flat towable as is. Make sure to consult the owners manual to verify... view full answer...
I have a solution for you, but there is not a plug and play type harness for this application that I'm aware of, so the easiest way is to tap into the tail lights on the truck. In order to power the third brake light on your truck topper via the tail lights you will need the Pacer Performance 3rd Brake Light Logic Module part # PP20-702, since the brake/turn signal circuits are combined. This means you'll need to separate the brake/turn signals or else the third brake light would blink... view full answer...
In order to flat tow your 2019 Chevy Colorado you will need a tow bar (which you already have), base plates, tow bar wiring, safety cables, a supplemental braking system and a high/low adapter. I've gone ahead and put together a quick list of the parts we recommend in each category below.
Base Plates: Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-523182-5 (compatible with your Roadmaster Falcon # RM-520 or # RM-525 tow bar without a base plate adapter)
Safety Cables:... view full answer...
First you will need the Roadmaster Direct-Connect Base Plate Kit # RM78VR for attaching to the front of your 2022 Chevrolet Colorado ZR2. This will provide you with a solid base for the tow bars to connect. You will be able to remove the arms for a cleaner appearance.
To connect to your tow vehicle the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 are the bars I recommend. These are heavier bars capable of towing a vehicle up to 8,000lbs. This will allow... view full answer...
I would be happy to help you set your 2022 Chevrolet Colorado up for towing your small trailer. I recommend the Curt Trailer Hitch Receiver item # C13176. This is a custom fit hitch that bolts to your Colorado's frame with included hardware. The powder coated steel is sturdy and corrosion resistant. I have attached a picture and an installation video so you can see the final product and the install process.
For your wiring harness you will need the 7-Pole and 4-Pole Trailer Connector Sockets... view full answer...
I have a solution for you but the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter item # BWRVK3500 only fits in B&W's turnover ball system because of the square post attachment point. For your 2013 Chevy Colorado's Blue Ox Hidden Hitch you will want to use the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter item # DM8550045. The Recon will attach to the gooseball in the bed of your truck. This 5th wheel trailer hitch mounts in your Colorado's bed by connecting directly... view full answer...
If you are installing the Roadmaster InvisiBrake # RM-8700 on your 2017 Chevrolet Colorado then you will need the Stop Light Switch Kit # RM-751472 if you have adjustable pedals instead of part # RM-751452. The part you referenced is for a Jeep but the kit # RM-751472 is for your Colorado. view full answer...
We'd be happy to help with that. As long as your Colorado has a transfer case that has a Neutral and a 4 wheel low position, it can indeed be flat towed.
For base plates, I'd recommend the Roadmaster Direct Connect base plate kit, part # RM78VR which Roadmaster confirms is compatible with the ZR2 package. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522. You'll also need # RM-643 safety cables.
To wire the taillights, use the # RM-152-98146-7 diode... view full answer...
The Replacement Locking Knob Assembly for Yakima Raptor Aero Roof Mounted Bike Carrier # Y8820181 is a replacement part for a Yakima Raptor bike carrier, it attaches to the clamp on that carrier. It does not actually lock the rack to the crossbars.
To lock the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 to your roof rack you would need to get the Yakima Accessory Lock Housing # Y07220 and the Yakima Same Key System (SKS) Lock Cores # Y07204. view full answer...
When installing The Curt Front Mount Trailer Hitch Receiver # C31074 onto your 2022 Chevy Colorado Z71 per the instructions you will need to determine if trimming is required on vehicle by raising hitch into position. If needed, mark and trim lower fascia, as shown below or remove lower fascia and return to owner. Make sure to check for proper fit prior to trimming. You will then have to remove the skid plate and is optional to trim a 1/2 inch from edge and replace later see picture below.... view full answer...
Sounds like you are looking for the just the Vehicle End 4-way flat trailer connector like the Hopkins # HM48190. This will mate with the wiring kit you have and connect to your male end 4-way plug # RM-300150-00 that you also purchased.
I have linked all the above mentioned products to this page for your convenience. view full answer...
We can help you with everything you'll need for safe and legal flat towing of your 2016 Chevrolet Colorado. The essential items include a tow bar, safety cables, a wiring/lighting solution, base plates and a supplementary braking system for the towed vehicle. Often a wiring extension and a high/low adapter are also required. The linked article covers each of these in detail.
Blue Ox offers base plate kit # BLU93FR that fits the 4WD 2016 Chevy Colorado with or without the Adaptive Cruise... view full answer...
To add a roof rack to the top of your 2021 Palomino 2910 truck bed camper you will need the following parts:
-Rhino-Rack RTC-Style Roof Rack Tracks # RTC14
-Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars # RRRLT600
-Rhino-Rack Vortex Aero Crossbars # RRVA137B-2
The tracks will mount directly to the roof of the camper which will allow you to attach the legs and crossbars for a complete rack. I would also suggest using a kayak rack like the Rhino-Rack Nautic SUP or Kayak Roof Rack... view full answer...
There are a number of parts you're going to need in order to flat tow your 2018 Chevy Colorado, starting with compatible base plates, and for that the best option is from Roadmaster, the I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-523182-5.
For a tow bar I recommend going with the Roadmaster Falcon Tow Bar # RM-522 because of how easy the tow bar is to connect to the base plates as well as its long arms, which make it easier to maneuver when towing. It also has really... view full answer...
The brake light relay and stop light switch kits are not required for the Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 on a 2019 Chevrolet Colorado. view full answer...
Yes, I can help set you up with everything you need. Lets start with the base plate and work from there.
Base Plate - Etrailer invisible base plate # e98966.
Tow bar - Etrailer SD non binding # e34ZR.
Tow Bar Wiring - Roadmaster universal diode kit # RM-15267.
Battery Disconnect - Use # RM-766 for gas models, or # RM93MR for diesel models. Please note that some vehicles have more than one battery. One battery disconnect is needed for each starting battery.
Supplemental braking system... view full answer...
there are actually 5 key parts needed to flat tow any vehicle: base plates, tow bar, safety cables, lighting, and supplemental braking.
The base plates provide a safe and secure attachment point for the tow bar on the vehicle. For your 2006 Chevy Colorado you can use Roadmaster base plates # 3122-1. They are compatible with the Falcon 2 tow bar # RM-520 which is what actually holds the vehicle to the motor home.
For safety cables you can use # RM-643. The coiled design helps keep the... view full answer...
Go To Results