We do have a 5th wheel tailgate for a 2011 Dodge Ram that does include its own cables. Take a look at the Stromberg Carlson tailgate, # VGD-10-4000. The cables with it are specially designed for use with this tailgate. view full answer...
Yes, installation hardware is included with the Stromberg Carlson 100 Series 5th Wheel Tailgate for GM Trucks, # VGM-88-100. I have attached a picture of the hardware for you.
The tailgate is going to attach to the truck bed with pins at each end of the tailgate. Just remove the pins to open the tailgate and replace to close. view full answer...
The Stromberg Carlson 100 Series 5th Wheel Tailgate, # VG-97-100, comes with all of the hardware needed for installation on a 2011 Ford Super Duty. We do have a few other tailgate options for your truck and all of them do come with the necessary parts for installation. I have included a link to them for you. view full answer...
The Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design, # VGD-02-100, does come with all the parts needed for installation. You can see all of the hardware in the last picture on the product page, above the description.
This tail gate cannot be fitted with a lock. However, there is a model for your 2003 Dodge Ram that does come with a lock. The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock, # VGD-02-4000, does have a lock and is made of glass-filled... view full answer...
Sorry to hear about your tailgate.
The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate # VG-97-4000 will install on your 2015 Ford F-250 as long as just the tailgate and the safety cables were removed. If the bolt that the safety cables attach to or the hinge mounts were removed then you would need to acquire those at an auto parts store.
I have attached a video of this tailgate being installed on a 2014 F-250 for you to see what is involved in the installation process. view full answer...
I am not sure what you mean by end plates but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part # VGD-10-4000 comes with everything that you will need to replace the factory tailgate on your 2017 Ram 2500. I have attached a photo of the extra parts included with the tailgate as well as a copy of the installation instructions that way you can make sure it has everything that you need.
If you can send me a photo of the end plates I may be able to offer further assistance. view full answer...
The Stromberg Carlson 100 Series 5th Wheel Tailgate # VGM-88-100 does not come with any kind of cable or strap to hold it, it just has hinges to allow you to lift and lower it. These tailgates are not designed to bear weight so you shouldn't climb on them or load them up with anything.
You certainly can have someone paint it, but it only comes in black so you would have to find someone locally to paint it.
You have a 2007 Ford F-250 listed as your vehicle, if this is the vehicle you... view full answer...
Yes, the Stromberg Carlson 4000 Series louvered tailgate, part # VG-04-4000, does include the cables.
It's designed to fit the Ford F-150 from 2004 to 2014 as long as you don't have a Stepside model. If you have a different truck let me know and I'll recommend the correct tailgate. view full answer...
Yes the Curt A20 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package part # C84FR has everything you will need to install it into your 2020 Cherolet Silverado 3500 with the prep package. It is a very reliable easy to use fifth wheel hitch you will be happy with for a long time.
You may also want in bed wiring like the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug part # 41157 This will give you a 7-Way connector in the bed of your Silverado so you... view full answer...
The Curt # C16545-16021 Q24 5th wheel hitch you'd looked at is indeed a complete hitch which includes the legs that would attach to the factory pucks in the bed of your 2022 Ram 3500 Long Bed.
The legs/feet are easier to see in the linked product description video.
You might also want to install a 7-way trailer connector in the truck bed, so you won't have to run the trailer connector cable up over the tailgate. You can install an in-bed 7-way using part # C56000. view full answer...
Both the Draw-Tite Custom Underbed Installation Kit, # 9460-39-5W, and the Hi-Rise 5th Wheel Trailer Hitch, # 9480-5W, will have all the needed equipment to connect a gooseneck or 5th wheel trailer to your 2000 Dodge Ram truck.
However, components like vehicle wiring, brake controller, or safety chains will not be included with these the two hitches.
If needed, I recommend the Tekonsha Prodigy P2 Brake Controller, # 90885, with the Brake Controller Wiring Harness, # 3020-P. I also recommend... view full answer...
The Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part 8550020 is the same as the Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part # DM6076P-21K but it also comes with the Universal Above-Bed Base Rails for Demco Premier Series 5th Wheel Trailer Hitches part # DM6071.
If you purchase the part 8550020 or the part # DM6076P-21K with the part # DM6071 then you will still need frame brackets. In order to recommend the correct set I would need to... view full answer...
The Spindle Grease Seal Set # BB60011 is for a single axle or 2 wheels. You will need to order 2 sets for your tandem axle 5th wheel. view full answer...
The Curt E16 5th Wheel Hitch w R16 Roller for Chevy/GMC Towing Prep Package # C16667 comes with the hitch head, sliding base, and adapter to your Chevy Factory prep package pucks. I've attached a video that shows the parts and their functions.
If you were to part this kit out it would include the Curt E16 5th Wheel Hitch Head Unit # C16515, the Curt R16 Fifth-Wheel Roller - 16,000 lbs # C16560, and the Curt OEM Fifth Wheel Roller Adapter for Chevrolet and General Motors Trucks with Factory... view full answer...
The Curt A25 5th Wheel Trailer Hitch for Ram Towing Prep Package # C16046 you asked does indeed come with the legs, so you will not have to make a separate purchase. The A25 is a really great choice for your Ram with the 5th wheel prep package because of its interlocking dual jaw system that wraps totally around the king pin to minimize movement in the hitch for a more peaceful towing experience.
It also has a handy indicator system, and what this does is let you know if the jaws on the... view full answer...
The Curt A20 5th Wheel Hitch # C16140 is also available separately with these parts:
- Replacement Head Unit for Curt A20 5th Wheel Trailer Hitch # C16540
- Replacement Base Legs for Curt Q20 5th Wheel Trailer Hitch # C16904
If it's cheaper to purchase them separately as opposed to kitted together then by all means go that route. The difference is just how our system is currently pricing them and that is always subject to change at any time (just like everything else sold online). view full answer...
The Demco Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th Wheel Hitches part # DM8552030-71 can be purchased without the rails with just the Demco Premier Series Custom Mounting Brackets for 5th Wheel Above-Bed Base Rails part # DM8552030. view full answer...
Yes, everything you see in our product images and the review video comes with the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin # LC179013. This includes the retainer and bolt you're referencing. view full answer...
Reese includes that wiring harness with all of their Elite line of hitches for Factory Rail Kits. The Reese Elite Series Pre-Assembled 5th Wheel Hitch w/ Slider, Wiring Harness - Single Jaw - 18,000 lbs # RP30144, will have the harness which you can choose to use or not use. We don't have the hitch available without that harness. view full answer...