When it comes to installing a trailer hitch on your 2022 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle.
This hitch has a simple bolt-on installation with no welding required, the hitch has a matte black powder coat finish over a protective base coat which offers superior rust resistance.
When it comes to the trailer wiring The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
Yes, the Rhino-Rack roof rack # RR37YR will fit your 2009 Toyota Venza with a naked roof. The roof rack does come with everything you will need to install it on your vehicle including the legs, bars, clamps, and all necessary hardware.
Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading. view full answer...
I have checked with my contacts at Magnaflow and the Stainless Steel Catalytic Converter # MF27301 does not include gasket for installation purposes. My contact explained that you will want to use the original manufacturer supplied gaskets or OEM replacement gaskets for installation.
This catalytic converter is confirmed as a fit for your 2000 Toyota 4Runner, but is not legal for use in the state of California. view full answer...
Yes! I went ahead and called my tech at Hollywood Racks, and he confirmed that the RV Rider # HLY64FR comes with 2 of the Small Wheel Hoop Adapters # HLY24FR (SW-ADP-U). view full answer...
I can understand why this might be frustrating. When it comes to installing the Curt Spectrum # C51170 in your 2019 Toyota Tacoma, you can hardwire the controller in to the vehicle and no additional parts or wiring are required. For this reason, the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51455 adapter isn't a required part to complete installation; it's more of a convenience to use than a required part. These adapters are also vehicle specific, which... view full answer...
The Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 54" Long DS1375B comes with the 54-inch long square crossbars and the mounting towers that are compatible with your 2006 Toyota Tacoma (double cab). It also comes with a special tool that is used to install the bolts. In order to have a complete crossbar system, you need the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK174.
If you need a walkthrough of the installation, I went... view full answer...
When attaching the Rhino Rack Roof Rack System, # RRVA118B-2 and # RRRLKVA to the roof of your 2011 Toyota Prius with the Custom DK Clamps and Pads, # DK195, the clamps will secure in the door jambs, see instructions link.
You will receive a security Allen wrench, that is needed to secure the security screws that hold the clamps into the legs. This is the security feature mentioned on the product page. I put together a photo showing the tool and the type of fastener included. view full answer...
The Optronics # STL572RB Sealed LED Stop/Turn/Tail Light is sold as a single piece, not a pair.
For complete installation you will require the corresponding rubber grommet, part # a70gb, which provides protection from mechanical stress, and the mounting bracket, part # BK70BB. Please note that in an existing 2 inch by 6-11/16 inch opening the grommet can be used to mount the light; if not the bracket can be used.
You will also need the 3-wire pigtail lead in either the straight or right-angle... view full answer...
The original Rack and Roll trailers had incandescent lights but now the lights are LEDs. The switch started in about October of 2010. I have included a link to a video review of Rack and Roll trailer # Y08106 for you. view full answer...
Yes, the Timbren Rear Suspension Enhancement System, # TTORTUN4, comes as a pair for the right and left sides of the rear end on your 2006 Toyota Tundra.
I have a similar system on my Dodge truck and it works very well when towing a trailer or carrying heavy loads in the bed. view full answer...
The etrailer Trailer Hitch Receiver # e98864 uses M12-1.25 x 35mm hex bolts. I have attached an installation video along with the written instructions below for your reference. view full answer...
The Putco # P700004 is a dual filament bulb, so it will function as both a high beam and a low beam. This kit contains the anti-flicker harness needed to swap from an incandescent or halogen bulb to an LED bulb and eliminate any flickering issues. view full answer...
For your 2017 Toyota Tacoma with a naked roof you do need a fit kit part # DK174 to install the aero bar roof rack part # RRVA137B-2, and # RRRLKVA.
Cost is available at links below. view full answer...
If your key needs to be in the ACC position so that the steering wheel is unlocked you would need to have the battery disconnected so that it wouldn't drain.
I'd recommend using a Roadmaster Automatic Battery Disconnect, part # RM-766. The disconnect would allow you to 'disconnect' the battery with a flip of a switch. When the battery is disconnected, the taillight circuit from the RV will maintain the battery in the towed vehicle (you'll need to leave the running lights in the RV on... view full answer...
The Solera 15-Foot Black Fade RV Awning Roller and Fabric # LCV000211480 consists of the roller and fabric. Hardware is not included since this item is intended as a replacement for an existing awning system. view full answer...
The Curt Hitch part # 13703 is a very universal trailer hitch that can be installed on I-beam frames like what your trailer has, the bend in the hitch brackets will accommodate your frame. This would be a great option for you. I attached an install video for you to check out as well. view full answer...
The Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies # AKEBRK-2 are just the electric drum brakes for 2,000lb axles and do not include drums. They are designed for a 4 bolt mounting flange bolt pattern and fit most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO. They fit a wheel size of 10", 12", or 13".
You'll want to match the brake flange pattern, axle capacity, and hub size when considering what options will fit your application.
Since... view full answer...
Yes, the Swagman Current Bike Rack for 2 Electric Bikes part # S64678 does come with a rubber coated steel cable lock which can be used to further protect the bikes from theft. This is a secondary lock feature as there are already lock built-in locks on the uprights as well for the bikes. view full answer...
Installation hardware is not included with the Swivel D Ring part # RR06 due to the unknown nature of the surface that the end user will attach it to.
Depending on the weight of the object that will be held down, and the thickness of the surface it will be attached to, you also might want to consider the backing plate part # BP06. view full answer...
The Carr Custom-Fit Side Step - Super Hoop - Polished Aluminum - 17" Step # CARR124032-1 comes with a quantity of 1 step. If you are looking for a driver's and passenger's side, that is the Carr Custom-Fit Side Steps - Super Hoop - Polished Aluminum - 17" Step - 1 Pair # CARR124032. These are confirmed to fit your 1993 Toyota Pickup (both Regular Cabs and Xtracabs). view full answer...