I checked with the manufacturer on this and they were able to tell me that the Advent Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners - White # ACRG15 uses the following hardware:
- 6 qty #8 X 5/8" Phillips Pan head tapping screw
- 4 qty 1/4-20 X 7" serrated flange head bolt
- 2 screw covers view full answer...
The Valterra RV Waste Valve, part # T50A, consists of both the 3-inch valve spigot and the 3-inch bayonet outer cap. You can see this item in the linked review video. view full answer...
The photo on the RHK product page is a typical photo, and doesn't represent the actual replacement hardware you'll receive for the Curt # 13333. There are hundreds upon hundreds of unique hitch fits, and it wouldn't be practical to get photos of each and every hardware kit for them. When you order a RHK for a given hitch, it'll consist of all the hardware that would have been included with the original hitch. If you look at the photo, you can see the exact hardware provided with the replacement... view full answer...
What you are referring to are called bolt leaders or fish wires. These are designed to put through a hole in the vehicle and then come back out of a larger hole. You will then thread the appropriate bolt on the spring end and gently pull the bolt into the appropriate position to complete the Installation. While I do not see these in the kit for the Aries steps like the AdvantEdge Nerf Bars part # AA2556049 for your 2019 Ram 1500 they may exist on other models. I've included a video explaining... view full answer...
The BulletProof Hitches Adjustable 2-Ball Mount part # MD206 does not come with a hitch pin as that is how it is offered from the manufacturer. It will accept a standard hitch pin like part # PC3 but I recommend protecting your investment with locking hitch pins part # 34061674-D or just part # 34061074-D. view full answer...
The Inno Truck Bed Cargo Rack # INRT101-79 consists of two crossbars and the hardware to install them on a compatible full-size pickup. It does not include the bike carrier itself. It will fit your 2015 Ram 2500 Mega cab.
With the rack in place you can use any rack-mount bike carrier that can fit on square bars. All such bike racks are shown on the linked page. These include fork-mount racks like the Swagman Fork Down # S64710, frame-mount racks like their Upright # S64720 and wheel-mount... view full answer...
In the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 has a 1-7/8 inch ball and a 2 inch ball. We do have a higher capacity kit that doesn't have 2 of everything but does have the 2-5/16 hitch ball size. It is the etrailer.com Ball Mount Kit - 1" Rise or 2" Drop - for 8,000 - 16,000 lb Hitches # EBMK2216.
If you need the 2-5/16 inch hitch ball but want the kit with everything and don't need the capacity to be over 7500 lbs, you can just add a hitch ball like # 63847. view full answer...
The mirror face of the Longview Custom Towing Mirrors # LVT-3100C has a flat, non-convex surface. The images would not appear distorted at all. view full answer...
The Draw-Tite Fold-Down Gooseneck Hitch you referenced, part # 8339-4457 does indeed include the mounting rails. I have confirmed that the hitch and install rails are a fit for your truck.
To provide a trailer connector in your truck bed, you might also be interested in part # 41157. I have linked you to an installation video for the trailer connector. view full answer...
The only thing that comes with (and is needed for installation) the WeatherTech Floor Mats part # WT444781 is the two floor mats themselves.
To see how these mats install check out the install video I attached. view full answer...
The Blue Ox Avail part # BX7420 does come with coiled safety cables. You'd need a high low adapter at around 13 inches like the # BX88132 which gets as close to that as possible at 10 inches. As long as you are within 3 inches up or down the adapter would be correct. view full answer...
The Timbren Rear Suspension Enhancement System # TDRTT1500 you were looking at for your 2017 Ram 1500 are indeed sold as pairs and includes everything you need to install them on your truck.
I included a video of the # TDRTT1500 for you to take a look at. view full answer...
The Inno Velo Gripper Bike Rack for Truck Beds # INRT201 is sold as a set so you will get 2 clamp-on ratchet strap systems with this part. view full answer...
The UWS Truck Bed Chest # UWS01040 does not come with a tray.
I reached out to my contact at UWS to see if their tray would fit and he said that the only way you can get a similarly sized toolbox with a tray is to use part # UWS04543 instead. This comes with a sliding tray but it is a crossover style so it would take up space on your bed rails. view full answer...
I have a solution for you. The Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 # TH711520 only comes with the crossbars themselves without the required foot pack and fit kit for your 2014 Dodge Ram 1500.
If you want a complete roof rack system, the WingBar Evo system is only available for crew cab and quad cab models. If you have a crew cab or quad cab, you will need the following parts in addition to the WingBar Evo Crossbars:
- Evo Clamp Feet for Thule Crossbars... view full answer...
Yes, we do carry a 3-crossbar version of the Thule TracRac TracVan ES Van Ladder Rack # TH29613XT. For the 3-bar version, that is the Thule TracRac TracVan Van Ladder Rack # TH29056XT.
In order to confirm the fitment of the TracVan ladder rack, I would be happy to provide you the confirmation if you provide the year/make/model of your vehicle. view full answer...
Yes, we have both the Firestone Elbow Connector for 1/4" Tubing # F3031-1 and the Firestone Inflation Valve for 1/4" Tubing # F3032-1 should you need to replace that as well. Both of these fittings are used in the Firestone 2560. view full answer...
The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs, part # A35RS545E does include the brakes.
This system includes the bearings, races, and seals along with the suspension units. The hubs have a 5 on 4-1/2 bolt pattern and the weight capacity for this system is 3,500 lbs. view full answer...
I called my contact at Westin and he confirmed that the mounting bracket covers do come with the mounting hardware for the Westin PRO TRAXX Oval Nerf Bars - 4" # 21-24085. Yes, the Westin PRO TRAXX will fit your 2021 RAM 1500 Tradesman Crew Cab. view full answer...