In regards to the Roadmaster Direct-Connect Base Plate Kit part # 131-8, the base plate tab and removeable arms are sold as a kit. The base plate tab is not offered separately. That said, if you need to replace the removeable arms we do have an option for this, the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS
Please note, the Roadmaster Direct-Connect Base Plate Kit fits the following vehicles:
1992 - 1994 Chevrolet Blazer excluding 1-ton and Diesel
1987 - 1998 Chevrolet... view full answer...
If you wanted to order the Curt Shock Absorbing Towing Starter Kit pat # C57DR without the brake controller you'd just need to order the individual components of the kit without the controller. So what you'd want would be the Rocker Ball # C45WR, the sway control part # 17200 and the Curt anti-rattle kit part # C22321. view full answer...
The Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount Item # S64663 comes with an anti-rattle hitch pin but if you want a locking one you'll need the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks Item # S64027 view full answer...
Yes, the Replacement Power Control Box for Thomas Payne Seismic Recliners and Sofas # LC36FR does come with all the wires shown in the photos, including the connector. Keep in mind this is a replacement specifically for the Seismic line of Thomas Payne RV furniture.
So as long as you have the Seismic line, the Replacement Power Control Box for Thomas Payne Seismic # LC36FR will work for you. view full answer...
If you wanted to use the # K71-358-00 on a tandem axle trailer you would need to order two of these kits. Each kit provides enough components for a single axle so with two of them you'd have a tandem axle covered. view full answer...
Not a dumb question at all!
Brake assemblies like the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 are either sold in matching pairs or as single brake assemblies for either the left or right side of the trailer # 23-464 (left) or # 23-465 (right). This particular kit is sold as a pair, so if you have tandem axles on your 2014 Grand Design Solitude 305re you'll want to order 2 of these brake kits.
Additionally, these brake kits... view full answer...
The MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension # MR33WR includes one adjustable crossmember.
Your existing hardware will be too short due to the extra thickness of the crossmember, so you will need to add # MR58ZR if your current shackles are 2-1/4" long, or # MR98ZR if your current shackles are 3-1/8" long.
This will install to the leaf spring hangers, located in-between the front and rear axle. So, for full support, a tandem axle trailer will utilize 3. view full answer...
Thanks for all of the info on the axle you have on your trailer. Since you have a Dexter 5,200 lb axle with a 6 lug bolt pattern the correct hub/drum you need is the Dexter # K08-201-98. view full answer...
Yes, you would want to purchase 2 of the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs # MR82AR if you're wanting to install on both sets of stabilizers on your 2021 Grand Design Imagine. view full answer...