Although the Thule FastRide Roof Mounted Bike Rack, part # TH95JV is configured to accept one of the Thule lock cores, they are not included with the rack.
The smallest available number of the lock cores are 2, part # TH450200. If you have other Thule equipment, you can also obtain quantities of 4 cores, # TH450400, 6 cores, # TH450600, or 8 cores, # TH450800, so the locks all match.
I've linked you to an FAQ article about roof mounted bike racks. view full answer...
Clearance light # 30-17-814 does not include a foam gasket. You would either need to reuse the old gaskets or use some silicone, # 0160297, around the light once it is installed. view full answer...
The Roadmaster Battery Charge Line Kit for Towed Vehicles, # RM-156-25, does not have a molded cover or terminal boots. If added electrical insulation is preferred for your install, I suggest the use of Liquid Electrical Tape, # SWC50122. This is a brush on type seal used post installation that forms a dielectric coating. This not only provides insulation against electrical shorts but helps to protect the circuit from moisture and road grim as well. view full answer...
The carriage bolts that come with the Curt hitch part # C11158 are M8-1.25 X 40mm CL10.9.
I attached a picture that has a list of all of the install hardware that comes with this hitch for you to check out as well.
I attached an install video for this hitch for you to check out as well. view full answer...
Yes, the Roadmaster BrakeMaster Braking System with BrakeAway for RVs with Hydraulic Brakes part # RM-9060 includes both the air compressor and proportional valve. Per the manufacturer's recommendation, the air compressor should be mounted in a clean dry area within 20 feet from the motorhomes battery whereas, the proportional valve will need to be installed on the frame rail of the motorhomes chassis.
The only additional items needed for installation that is not included in the kit is... view full answer...
Flat towing base plates like the Blue Ox kit # BX2654 for the Ford Focus, the item that you referenced, do not include wiring. The reason is that there are several different types of products to provide the electrical/lighting connection between a motorhome and towed car and some owners may have a preference for one or the other.
For example, for the various versions of the 2015 Ford Focus we have flat towing wiring products (shown on the linked page) that include inexpensive magnetic... view full answer...
RoadMaster Base Plate kit, part # 524407-1, only includes the base plates and corresponding installation hardware. It does not include a tow bar or any wiring. You would need to purchase a tow bar separately like part # RM-020.
Installing part # 524407-1 will require trimming the lower grille on a stock bumper. It would be safe to assume that it would also require trimming on any aftermarket, factory option or dealer installed body package, but I do not know how much trimming or where... view full answer...
Let's start with the wiring kit question, and yes you can use your current Roadmaster tow bar lighting kit, it won't affect the use of the Demco system. And to answer your other question, yes, everything that is required for the installation is included with the the Stay-IN-Play braking system, which is the following part number:
- Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor # DM86VR
The only thing I recommend considering - if you don't already have... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11296, for the 2005 Ford Focus Wagon comes with the mounting hardware, but it does NOT come with a ball mount.
The ball mount you will need for the Curt hitch is the Draw-Tite Ball Mount, part # 3592. It must be used in the rise position only. It will include the pin and clip.
If you are towing with this hitch you will also need the following items.
Tow Ready 2 Inch Hitch Ball, part # 19258, or Tow Ready 1-7/8 Inch... view full answer...
Go To Results