We do have A-frame trailer tongue toolboxes that are made in the USA, though the MaxxTow MaxxHaul Trailer Tongue Toolbox is made in China.
Like you mentioned, the RC Manufacturing toolboxes are made in the USA and are a very high quality toolbox. It has a locking handle to protect your tools, a weatherproof seal to keep them dry, and a gas strut that keeps the lid open while you find what you need so you don't have to hold it up. These A-frame toolboxes are available in black or silver... view full answer...
I reached out to the manufacturer who said the hitch balls on the Flash Solid Steel Adjustable Ball Mounts are a solid piece that has a bolt running through it inside the mount. What this means is that there is zero chance of it coming apart while you are towing your trailer. Simply abide by the capacities of the hitch and it is extremely safe.
There are a number of Flash Solid Steel Ball Mounts, each of which comes with a 2" and 2-51/6" hitch balls and the correct one for your needs will... view full answer...
The Fastway Self-Locking Adjustable 3-Ball Mount # DTALBM6625-3S referenced in your question does feature a steel sleeve over the ball mount shaft that allows it to be used in a 2-1/2 inch receiver hitch. The sleeve cannot be removed and it does not compromise the strength or integrity of the ball mount itself. This unit includes three stainless steel hitch balls (1-7/8 inch, 2 inch and 2-5/16 inch) and has a tongue weight capacity of 1,000 pounds.
I have attached a video demonstration... view full answer...
Yakima racks are made in either Taiwan or China. The cargo boxes are made in the USA in Southern California.
All of the Thule 4 bike racks are made in the U.S.A., but there are no Thule 4-bike racks designed for campers that can withstand the extra torque. view full answer...
The Tongue Extension Kit for Yakima Rack and Roll Trailer # Y08109 adds 3 feet of overall length to your Rack and Roll Trailer like # Y08107. I reached out to my contact at Yakima and they said they acquired the trailer in 2009 and it was being made back in 2006 and they have had no problems with the screws you mentioned having any issues whatsoever. He said they haven't considered changing it because they have not experienced any issues.
If you were to alter it by drilling and putting... view full answer...
The Camco Trailer Tongue Jack Stand # CAM44635 is made of resin and the Valterra part # A10-0900 is also made of a plastic/resin.
Since the Valterra has a base that is about an inch wider in diameter that would be what I would go with if I were you since the wider the base the more stable it would be. view full answer...
The Extreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind - 10" Lift - 770 lbs - Zinc # ORJW1SU weighs 41 lbs packaged for shipping. It likely will add about 39 lbs to your tongue but depending on your trailer balance it may not all be tongue weight but the majority will be simply based on location. Your loaded trailer may change your tongue weight based on how you load your cargo.
If you want a specific weight you can use a scale like the etrailer # e99044. view full answer...
There are a few weight distribution systems that are made in the USA. The TorkLift SuperHitch Everest Weight Distribution System # TLWD1000 and all of the Blue Ox SwayPro Weight Distribution w/ Sway Control systems like # BXW1000 are made in the USA.
The best of these options for most trailers is the Blue Ox SwayPro System that is a fit for your total tongue weight. That total tongue weight is determined by the loaded tongue weight of your trailer as well as any cargo behind the rear... view full answer...
I spoke with my contact at RC Manufacturing and she confirmed that the Aluminum A-Frame Trailer Tongue Toolbox part # 350975 is proudly made in Elkhart, IN USA. view full answer...
The Equal-i-zer Weight Distribution System # EQ37041ET referenced in your question is made right here in the USA.
This is an excellent system that will do a great job of evenly distributing weight over the axles of your trailer and tow vehicle. It features integrated 4-point sway control to limit side to side movement. It has a maximum tongue weight capacity of 400 pounds. As long as the total tongue weight of your setup, which includes both the loaded tongue weight of your trailer plus... view full answer...
The etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity # e99044 has a lifetime limited warranty that protects against any defects in workmanship and manufacturing. It's been very highly reviewed since we brought it to the market and has worked out well for a lot of customers.
I've also linked our returns policy for you. view full answer...
Aluminum A-Frame Trailer Tongue Toolbox Item # 350970 is weather resistant but not waterproof. For something to be considered waterproof it has to be able to be submerged under water for a certain period of time and not let water in. None of the toolboxes are waterproof but as far as keeping out rain they can do that just fine. view full answer...
The shipping weight of the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW # EQ37060ET is 98 lbs. This weight is not added to the tongue weight of the trailer hitch or the GVWR of the trailer when determining the total tongue weight. view full answer...
While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China.
However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up... view full answer...
THe lock body of the EZ Lock Trailer Coupler Lock, part # BLTL-20 is made from aircraft grade aluminum. To actually lock the coupler lock, you'll need to purchase a 3/4 inch diameter locking padlock like part # ML40D. view full answer...
The 7/8" Wide Trailer Coupler Latch Lock # 2878DAT is made of hardened steel.
As far as how easy it is to defeat, ultimately any lock can be defeated given enough time and the right tools. Since there is no gauge of how "breakeable" a specific lock is, we recommend making your setup look intimidating to deter would-be thieves.
If you are wanting to deter theft of your trailer when it is coupled then the Bulldog # BD580404 is a great option because it has a coupler lock and a ball mount... view full answer...
A great American made hitch lock option is the etrailer Trailer Hitch Receiver Lock # e98881
This lock is for both 2" and 2-1/2" trailer hitches, and is rated for up to 15,000 lbs. It is also made of steel but is double chrome plated so it won't rust, giving you a lock with outstanding overall longevity. view full answer...
The Tow Smart # 3481213 is manufactured in China. If you're looking for a similar lock that's manufactured here in the US, I'd recommend theBlaylock # BLTL-33. For a compatible padlock, I'd recommend the # ML40D from Master Lock.
I've linked to a product demonstration video featuring the Blalock EZ Lock Coupler Lock. view full answer...
Out of our available locking hitch pins, the etrailer, Roadmaster, InfiniteRule, Demco, and Blue Ox locks are made in the USA. Assuming you have a 2" hitch I recommend the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel # e98882. This hitch lock fits standard 2" hitches and has a span of 2-5/8". It comes with 2 keys and as previously stated is made in the USA.
I have attached a review video for your reference. view full answer...
The etrailer Wheel Lock # 288-02020 is made in China. If you are looking for a U.S.A.-made wheel lock, the only one we carry is the Blaylock EZ Trailer Wheel Lock # BLEZ-302. This wheel lock is compatible with most 15" to 20" wheels and also has the ability to be keyed-alike.
I went ahead and attached a demo video of the EZ wheel lock for you to check out. view full answer...
Go To Results