Yes. The Optronics Opti-Brite LED RV Dome Light - 227 Lumens - Rectangle - White Lens # ILL36CB is designed to be dimmable down to 8 volts at which point the light will turn off. I reached out to my tech contact at the manufacturer to confirm. view full answer...
I confirmed with my contact at Air Lift that the Replacement Button Head Screw for Air Lift LoadLifter 5000 Rear Axle Kit # AL17366 are American-made. If the original screws are stripped to the point where you cannot remove them, they will most likely require you to drill them out using a bit. view full answer...
I have a solution for you but the etrailer Hitch Mounted Spare Tire Carrier item # e98ZR and other comparable spare tire carriers at that price range aren't rated for motorhome wheels/tires. The main issue is that the mounting system won't accommodate wheels with large bolt patterns like 8 on 6-1/2". That carrier can only support up to 6 lug wheels that weigh under 121 lbs.
For your Jayco 32 foot Class C you will want to use the Roadmaster Hitch Mounted Spare Tire Carrier item # RM-195225.... view full answer...
The Denver Mattress Rest Easy Plush RV Foam Mattress # DE29ZR does feature all-foam construction without metal springs inside it. This allows for a more compact size when the mattress is shipped. Foam construction lets the mattress be shipped in a compressed state; it will take about a day for it to fully expand back into its normal full size.
You can cut foam material such as what is in the mattress but this would require a cutting tool such as an electric knife or other device that... view full answer...
The Bulldog Winch Trailer Winch # BDW10039 has a black powder coated steel body. The motor housing, gearbox, gear train, rollers, and mounting plate all have a steel construction so you can be confident this will not break like your Badland 12k. view full answer...
The mirrors on the CIPA clip-on towing mirror, # 11953, are made of glass. The housing is automotive grade plastic. I have included a link to a video review for you. view full answer...
The K-Source Snap & Zap Custom Towing Mirrors part # KS81850 which are a fit for a 2017 Ford F-150 are made in China. If you are looking for a made in USA option we have two, the CIPA Custom Towing Mirrors part # CM11550 and Longview Custom Towing Mirrors part # LVT-2300-C. view full answer...
The Curt trailer hitch # 13542 for the 2006 Ford Freestyle is made in the US. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip and a carrying bag. For trailer wiring use # 118395. I have included some instruction and video links for the wiring as well. view full answer...
The Optronics Red LED Trailer Clearance or Side Marker Light # MCL32RB will come from their factory in Taiwan.
If you are looking for clearance lights that are made in the USA I recommend the Peterson Double Bullseye Clearance and Side Marker Trailer Light in Red # 425800 or Amber # 425600. These have the same 4" long by 2" wide footprint but use bulbs rather than LED's.
The bulbs can be swapped for LED's # DI88VR if you prefer the lower power draw and longer life of LED lights. view full answer...
Covercraft Carhartt SeatSaver Custom Seat Covers - Front - Gravel Item # SSC2412CAGY uses the Carhartt Duck Weave fabric throughout which is similar to the Carhartt coveralls. They will not cause any damage to the leather seats in your 2016 Ford F-350 Platinum!
The material is breathable and it won't prevent the ventilation from working but it goes without saying that it will impede the normal air flow of the ventilated seats. view full answer...
The washer and nut included with the Brophy Hitch Ball, part # SC30-C are not stainless steel as the hitch ball is.
We do not offer a stainless hitch ball nut or washer. You may be able to find them at a local hardware store. The shank on this hitch ball is 1-inch diameter and the shank has fine threads(14 threads per inch). view full answer...
The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75506 which is a fit for a 2007 Ford F-150 is made in Mexico. If you are looking for a USA option, the Curt Trailer Hitch Receiver part # C13360 is the way to go. If you need a trailer connector to go along with the trailer hitch, the Curt T-Connector Vehicle Wiring Harness part # C56031 is plug-n-play. view full answer...
STX is a appearance package which is an optional package on the Ford F-150. The STX is not a trim level, the STX can only be added to the XL trim level. According to my research the STX package started in 2003.
However, the K-Source Snap & Zap Custom Towing Mirrors # KS81800 are a confirmed fit for your 2006 Ford F-150. Snap these custom-fit towing mirrors over your vehicle's existing mirrors for an expanded field of vision. Built-in mounting clips grab the inside edges of your factory... view full answer...
I checked the material of the K-Source Replacement Side Mirror # KSH3661 in our warehouse. It has metal mounting brackets, arm, and hardware. The housing of the mirror itself is plastic but has the chrome finish to look like metal but resist corrosion. It has the same footprint and mounting points as the factory mirror on your 1993 Ford F-150 so it is an easy no-drill installation. view full answer...