The two pieces of the Two Tone License Plate Frame # CR63350 that you referenced are made of steel and not plastic. Once piece is powder coated and the other is chrome plated. view full answer...
According to the manufacturer, Cruiser, they design and engineer their products in the USA, but they manufacture parts in China, so that is where the USA Flag License Plate Frame - Red, White, Blue and Chrome # CR23003 was made. view full answer...
The license plate bracket for the Hopkins Smart Hitch Backup Camera # HM50002 is indeed made up of a durable plastic. This keeps it strong enough to hold up to everyday use while also eliminating any concerns over rust and corrosion since it's going to be sitting out in the elements.
I have attached a short video demonstration on this system that you can check out as well. view full answer...
The License Plate portion of the DWD Cadillac SRX License Plate, part # 307837 is constructed of stainless steel. The emblems attached to the plate are the same exact OEM emblems used on your SRX. The plate is the standard license plate size, as long as your SRX has the mounting location for a license plate, the plate will indeed fit your vehicle just fine. view full answer...
The Chevy Camaro Bowtie License Plate, part # 317423 features a bowtie emblem on a chrome plated stainless license plate. The bowtie is actually an emblem affixed to the plate, and is not a sticker. view full answer...
I contacted our representative at DWD about the DWD Plastics Infiniti License Plate, part # 311162.
Our representative at DWD informed me that the Infiniti logo is made of plastic and covered in chrome just like the manufacturer logos are.
There is not a license plate available that just has the Infiniti symbol. Our representative informed me that Infiniti requires that DWD produce the plates with the logo and the name.
The Infiniti symbol is attached to the plate using automotive double-stick... view full answer...
The bracket on the LED License Plate Light and Bracket, part # LPL55CB is constructed of durable plastic. A steel bracket with the LED lights is not offered, but the bracket part # LP20SB and the LED light, part # LPL41CB can be purchased separately but used together. view full answer...
I went out to the warehouse and pulled Peterson license plate light # M439K. The packaging does indicate that it is made in the USA. I have included a link to a video review of the light for you. view full answer...
The New York Giants NFL Sport Plate - 3D License Plate # NSP120 does not have any rust-resistant coating on it so you would want to try to keep it out of the rain if possible since it has a zinc alloy finish.
You can protect it from the elements using a license cover plate like the Stainless Steel # WT60027. This part also comes in White # WT8ALPCC8, Black # WT60020, and a variety of different colors which you can find on the linked product page. view full answer...
In order to take pictures of shiny parts like # 300258 and have them display properly, we have to use a special spray. This can make shiny parts look more dull than they actually are. The plate actually has a mirror finish and is not dull at all. I made a short video featuring the same design license plate so you can get a better idea of what it looks like. view full answer...
Though the wattage for Replacement Bulb # 67 was not available, this 12V bulb will replace all #67 bulbs so you only need to be sure that is the correct replacement bulb for your 1993 Mitsubishi Mighty Max; if it is the right type of bulb it will work for you. view full answer...
The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts. view full answer...
To remove bulbs from the Round Trailer License Plate Light with Mount Ears - Chrome Plated # LP71CB, you simply remove the screws on the outside mount, remove a plastic dome and rotate the bulb to remove. The bulb is a CT67. We don't have any LED replacement options for this bulb. We don't offer them in black instead of chrome.
If you want a black LED option, I recommend the # LPL55CB. I've attached a video for you. view full answer...
I went out to the warehouse and pulled a set of Fastener Caps # CR82650 for you. I took them around the office to gather the opinions of my co-workers and we have all determined that these are a semi-gloss. Not shiny like high gloss but not flat like matte. In other words they do reflect a little light. I think you will like them though since they are not that super shiny type of gloss you are wanting to avoid. view full answer...
Your 2006 Keystone Montana 3000RK was not pre-wired for a backup camera. You will need to either capture constant 12V power for the observation camera from the running light circuit or you can capture power from just the reverse light for use only when vehicle is shifted into reverse.
I don't have a wiring schematic for your trailer, but I recommend capturing the running light power from the license plate light to power your backup camera. You can use the circuit tester # PTW2993 to... view full answer...
The license plate bracket (Part C) of the Hopkins Smart Hitch Backup Camera # HM50002 is made of 1/2 inch plastic so cutting it wouldn't cause any camera issues. Although it might not be necessary. The camera can easily be detached from the bracket and the sensors can be too using a screw driver. So it might work better for you to install it this way. view full answer...
The housing of the Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand, item # 432000, and right side, item # 431800, is plastic. At this time we do not have a round surface mount light that has a metal housing. view full answer...