Yes, we have Harley Davidson license plates available. Checkout the Harley-Davidson License Plate part # HDLPD06A.
The item you selected, Harley-Davidson Truck Floor Mats # PC000666R01, comes with 2 mats, a driver side and passenger side mat.
I have linked all the Harley Davidson License Plates and license plate frames we have available. view full answer...
The only other thing you might need to actually install light kit # TL29BK is a wiring kit such as # HM51020. But if you already have tools and connectors and the other items in the kit you will not need to add anything else. I have included a link to a video review of this light kit for you.
One tip I can add is that to avoid ground problems down the road, either mount the license plate bracket by itself (and not sandwiched between the light and trailer frame) or put a ring terminal in... view full answer...
I have had several vehicles that only had attachment points on the top (and 1 that only had them on the bottom for some reason). Basically, you will use the machine screws, put them through the holes in the cover and license plate that are NOT used for mounting the plate to the car. Use the included nuts to secure the screws. Then you would just use the mounting screws that match your vehicle in the other two holes. view full answer...
The part # 30-92-001 can easily be installed on either side of your trailer. Since you don't need a license plate bracket and/or light this would be an ideal solution. view full answer...
Possibly leaning towards most likely but I do not have a Telsa Model Y in front of me to see. What I can do is give you the height of the 39x25 Inno Cargo Carrier with Removable Cargo Box item # IN94MR so you can confirm whether or not you'll be blocking your plate and/or camera. The top of the cargo box sits 22" above the top of your hitch receiver. It measures 63-1/2" long x 28" wide x 15-3/4" tall.
If your plate is blocked and this is something you're concerned with. You can use the... view full answer...
The WeatherTech Plate Frame # WT61020 would show the registration stickers of your Ohio license plates. It would not cover a significant amount of your plate at all. view full answer...
Snap-In License Plate, Utility or Dash Light # LP11CB, when used as a license plate light, fits into a 1-1/4 inch hole in a bumper; usually found on trucks with step bumpers. There isn't a license plate frame that has a 1-1/4 inch hole. The hole would have to be put into the frame if used on a trailer.
Another option is to use a license plate frame with a built in light such as # LP55CB or # LPL55CB. view full answer...
There is a Cruiser Accessories Motorcycle License Plate Frame available that is fairly similar to the Nouveau plate frame you mentioned. Take a look at the Cruiser Accessories Neo, part # CR77050. You can see the frame by using the provided link. view full answer...
I have an option for you but the Cruiser license plate holders that you looked at like part # CR21010 are not made in the USA. However, the WeatherTech brand of license plate holders are made in the USA.
I recommend the WeatherTech ClearFrame Chrome License-Plate Frame part # WT63023 but I did attach a link of all of the WeatherTech license plate frames available. view full answer...
I went into our warehouse and grabbed a Cruiser License Plate Frame # CR15350 you referenced to check if this item comes with the tabs on the back. It does, in fact, feature a tab on either side near the bottom to help prevent the license plate from rattling while you travel.
Another product you may be interested in is the Cruiser Locking Star Pin Fasteners # CR81200. These fasteners deter the theft of your license plate and plate frame with a star-shaped keyhole and special key that is... view full answer...
I have a solution for you. While we do not carry a license plate that fits exactly with your 7 inch x 4 inch dimensions, we do carry the Neo Motorcycle License Plate Frame - Black # CR77050. The license plate frame has inner dimensions of 6-5/8 inches wide x 3-5/8 inches tall. While this plate frame will definitely cut off some of your plate, it hopefully will not cut off the lettering. If you need the hardware for fastening the cover, I recommend the Star Pin Locking Fasteners for License... view full answer...
The motorcycle license plate frame part # CR77000 that you referenced is designed to fit the standard motorcycle license plate frame size of 4 inch by 7 inch. view full answer...
The Cruiser Accessories License Plate Mounting Plate # CR79150 has the exact same dimensions as a license plate so it would not be visible behind one. It would just appear as if the license plate was 1/4 of an inch off the back of the surface it is mounted to. view full answer...
You could use a license plate holder like part # CE26053A as it has adjustable mounting slots to accommodate the smaller license plate you have.
But as far as a frame that goes totally around the plate that is not available. view full answer...
I have some license plate frames that you may be interested in, but we do not have anything like what you described.
I have attached a link to all of the religious license plate frames that we offer. view full answer...
According to Cruiser Accessories, their # CR76200 Tuf Flat license plate shield is designed to work with a license plate frame, so it'll work just fine with your existing frame.
If you don't already have mounting screws, you can use the # CR81300 set which includes security bolts that are very difficult to remove unless the included wrench is used. view full answer...
The Cruiser Tuf Flat Clear Shield for License Plates # CR76100 is designed to work well with or without license plate frames. Since it is flat and contours to the plate's surface it will work with most frames but in some cases you might need longer hardware for it to work with a particular frame.
I went to our warehouse to look at this item for myself. It measures 12 x 6-inches overall. There is a small lip on the shield that gives it a total thickness of about 1/8-inch. view full answer...
We offer several black license plate frames including the Neo Classic from Cruiser, part # CR15350, which is made of durable die-cast zinc with a black powder-coated finish. We also offer their Classic Lite License Plate Frame # CR20050, also made of zinc, that is designed to show more of your plate. Another option is their # CR15050. view full answer...
Yes, the Elite Stainless License Plate Frame part # CR21010 will absolutely fit both the front and rear license plates on your new 2018 Acura ILX. The U.S.A. uses a standard license plate size (12" long x 6" wide) so there will be no need to measure first. view full answer...
The backup sensors and camera on the Hopkins Rear View Camera # HM60195VA will prevent most aftermarket license plate frames from being able to be used. The plate will sit behind the notches in the camera and backup sensor mounts. view full answer...