Yes, if you wanted to turn the Stromberg Carlson Electric Trailer Jack # JET-3755 so that the housing was at an angle to give you more tailgate clearance you certainly could. view full answer...
You could drill new holes in the mounting plate of the Stromberg Carlson Electric Trailer Jack # JET-5000 to fit your spacing needs on your 2019 Airstream Flying Cloud Travel Trailer. If possible the best way to mount is to have it welded to the tongue of your trailer.
If you do drill new holes in the mounting plate I recommend spray painting the bare metal of the new holes to prevent rust and corrosion. view full answer...
That is a definite maybe. I suggest you review the installation instructions that I linked below for the 2,000 Watt Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch, # PD64FR. Ensure that the unit installed by the dealership matches the manufacturer installation instructions. If it was installed according to the instructions from Progressive Dynamics, you should then be able to make a remove and replace of components and be good-to-go. view full answer...
Both positions are actually correct. If you are looking at the instructions for the # RP66083 you will see it in the rear position on page 3 which I also attached below. The instructions state "If the frame plate interferes with any part of the trailer frame, the orientation can be changed by switching sides."
What this is saying is that you can flip them around. It is simply a matter of what works best for your setup. The only thing that is really important is getting the measurements... view full answer...